Onyx Forged
FREN

Custom forged wheels for Mazda MX-5 ND (2015-present)

Technical specifications

Production period
2015-present

Original fitment measurements: Mazda MX-5 ND

The measurements of the car as delivered new, to identify yours and compare. Each value refers, by a number, to the sources that give it. They are not a recommendation: Onyx does not advise any specific offset.

Hub

MeasurementOriginal value
PCD (bolt pattern)4x100 [1, 2, 3]
Centre bore54.1 mm [1, 2, 3, 4]
ThreadM12 x 1.5 [1, 2, 3]
FixingWheel nuts [1, 2, 3]
Bolt or nut seatNot published
Tightening torqueNot published

“Not published”: no source gives it with the certainty we require at this stage (see the rule below).

Original fitments by version

Version and fitmentFrontRear
DiameterWidthOriginal offset (manufacturer)TyreDiameterWidthOriginal offset (manufacturer)Tyre
MX-5 1.5 Skyactiv-G, roadster and RF, from 96 to 97 kW, 16 inches, original equipment16″ [5, 6, 7, 8, 9, 10]6.5J [5, 6, 7, 8, 9, 10]ET 45 [5, 6, 7, 8, 9, 10]195/50 R16 [5, 6, 7, 8, 9, 10]16″ [5, 6, 7, 8, 9, 10]6.5J [5, 6, 7, 8, 9, 10]ET 45 [5, 6, 7, 8, 9, 10]195/50 R16 [5, 6, 7, 8, 9, 10]
MX-5 1.5 Skyactiv-G, roadster and RF, from 96 to 97 kW, 16 inches, 7J wheel, original equipment16″ [9, 10]7J [9, 10]ET 45 [9, 10]195/50 R16 [9, 10]16″ [9, 10]7J [9, 10]ET 45 [9, 10]195/50 R16 [9, 10]
MX-5 2.0 Skyactiv-G, roadster and RF, from 118 to 135 kW, 17 inches, original equipment17″ [11, 12, 13, 14, 15, 16, 17]7J [11, 12, 13, 14, 15, 16, 17]ET 45 [11, 12, 13, 14, 15, 16, 17]205/45 R17 [11, 12, 13, 14, 15, 16, 17]17″ [11, 12, 13, 14, 15, 16, 17]7J [11, 12, 13, 14, 15, 16, 17]ET 45 [11, 12, 13, 14, 15, 16, 17]205/45 R17 [11, 12, 13, 14, 15, 16, 17]
MX-5 2.0 Skyactiv-G, roadster and RF, from 118 to 135 kW, 16 inches, original equipment16″ [11, 12]6.5J [11, 12]ET 45 [11, 12]195/50 R16 [11, 12]16″ [11, 12]6.5J [11, 12]ET 45 [11, 12]195/50 R16 [11, 12]

The offsets are the original ones, given by the manufacturer or by the sources cited; they help you identify your car's fitment.

What Onyx can make for the Mazda MX-5 ND

Custom forged wheels in forged 6061-T6 aluminium, designed to JWL/VIA standards, in monoblock or two-piece construction; three-piece wheels are made on quotation.

The diameters below start at the smallest original diameter recorded on this car (16″) and go up to 24″.

DiameterMonoblock, set of four wheelsTwo-piece, set of four wheels
18″€3,200
Great Britain: £3,336 with UK import VAT		€4,300
Great Britain: £4,482 with UK import VAT
19″€3,200
Great Britain: £3,336 with UK import VAT		€4,300
Great Britain: £4,482 with UK import VAT
20″€3,300
Great Britain: £3,440.40 with UK import VAT		€4,400
Great Britain: £4,586.40 with UK import VAT
21″€3,550
Great Britain: £3,700.80 with UK import VAT		€4,750
Great Britain: £4,951.20 with UK import VAT
22″€3,750
Great Britain: £3,908.40 with UK import VAT		€5,200
Great Britain: £5,420.40 with UK import VAT
23″€3,950
Great Britain: £4,117.20 with UK import VAT		€5,750
Great Britain: £5,992.80 with UK import VAT
24″€4,100
Great Britain: £4,273.20 with UK import VAT		€6,300
Great Britain: £6,566.40 with UK import VAT

Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Wheels delivered in 4 to 8 working weeks, shipping included, from full payment for an order on the website, or from the deposit for an order on quotation, and at the earliest from your approval of the measurements, the colour or the 3D render you asked for, under article 5.1 of the Terms and Conditions.

The offset and width of your wheels do not come from a table: the Onyx Forged design office calculates them for your car and your brakes, and submits them to you before machining.

Configure wheels for the Mazda MX-5 ND

Frequently asked questions: wheels for the Mazda MX-5 ND

What are the original offsets for the wheels of a Mazda MX-5 ND?

An offset of 45, on both axles and on all the wheels permitted by the Swiss vehicle type records: 6.5J x 16 on the 1.5, and 7J x 17 on the 2.0; since December 2022, a 7J x 16 wheel is also permitted on the 1.5. [5, 9, 13]

Which tyres, and which load index, does a Mazda MX-5 ND take?

195/50 R16 of load index 84 on the 1.5, i.e. 500 kg per tyre, and 205/45 R17 of load index 84 on the 2.0, i.e. 500 kg, on both axles. [5, 13, 18]

What is the load per wheel on a Mazda MX-5 ND?

The Swiss vehicle type record for the 135 kW 2.0 roadster gives it a permissible load of 645 kg on the front axle and 615 kg on the rear axle, i.e. 322.5 and 307.5 kg per wheel; the record for the 135 kW RF gives 635 kg at the front and 660 kg at the rear. The 205/45 R17 tyre of load index 84 carries 500 kg. [13, 14, 18]

What PCD, centre bore and nuts does a Mazda MX-5 ND use?

The PCD is 4x100, the centre bore 54.1 mm, and the wheels are held by M12 x 1.5 nuts: wheelfitment.eu, koleso.ee and SCC give these measurements; hubcentric-rings.com gives a different PCD. The tightening torque is not published: only one database gives it. [1, 2, 3, 4]

Sources for the measurements and answers

  1. koleso.ee, Mazda MX-5 IV (ND) [2015 .. 2026], 96 to 135 kW (secondary source, consulted on 21 October 2026)
  2. SCC Fahrzeugtechnik (spurverbreiterung.de), Mazda MX5 ND, 2015 onwards (secondary source, consulted on 21 October 2026)
  3. wheelfitment.eu, Mazda MX-5 (2015 - ) (secondary source, consulted on 21 October 2026)
  4. hubcentric-rings.com, Mazda MX-5 (“ND (2015–)” row) (secondary source, consulted on 21 October 2026)
  5. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1MB130 (Mazda MX-5 1.5 Skyactiv-G roadster, type ND, 96 kW, June 2015): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  6. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1MB185 (Mazda MX-5 RF 1.5, type ND, 96 kW, November 2016): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  7. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1MB251 (Mazda MX-5 1.5 roadster, type ND, 97 kW, June 2018): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  8. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1MB627 (Mazda MX-5 1.5 roadster, type ND, 97 kW, December 2021): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  9. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1MB660 (Mazda MX-5 1.5 roadster, type ND, 97 kW, December 2022): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  10. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1MB663 (Mazda MX-5 RF 1.5, type ND, 97 kW, December 2022): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  11. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1MB131 (Mazda MX-5 2.0 Skyactiv-G roadster, type ND, 118 kW, June 2015): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  12. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1MB186 (Mazda MX-5 RF 2.0, type ND, 118 kW, November 2016): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  13. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1MB252 (Mazda MX-5 2.0 roadster, type ND, 135 kW, June 2018): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  14. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1MB255 (Mazda MX-5 RF 2.0, type ND, 135 kW, June 2018): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  15. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1MB628 (Mazda MX-5 2.0 roadster, type ND, 135 kW, December 2021): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  16. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1MB664 (Mazda MX-5 RF 2.0, type ND, 135 kW, December 2022): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  17. Swiss Federal Roads Office (ASTRA), vehicle type record no. AXA262 (Mazda MX-5 2.0 roadster, type ND, 135 kW, November 2023): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  18. Fiches-auto.fr, tyre load index table (index → kg) (reference table, for a conversion, consulted on 3 October 2026)

Publication rule: a measurement is shown only if a primary source gives it (a manufacturer's document, an official vehicle type record, an original parts catalogue, the maker of the original wheel) without another primary source contradicting it, or if two independent specialist sources agree without a primary source contradicting them. The press and forums do not count. Measurements checked on 21 October 2026 by the Onyx Forged design office.

Designs for this generation

Three models from our catalogue, forged to measure for your Mazda MX-5 ND. The price is for a set of four wheels: it depends on the construction and the diameter.

Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Find my wheel · All 24 designs in the catalogue

See these wheels on your car

Custom forged wheels for the Mazda MX-5 ND

  • Forged 6061-T6 aluminium
  • 5-axis CNC machining
  • Designed to JWL/VIA standards
  • Fitment worked out for your Mazda MX-5 ND

MX-5 ND: 4x100, a 54.1 mm hub, M12 x 1.5 nuts

The fourth-generation Mazda MX-5 (ND), whose first Swiss vehicle type record dates from June 2015, roadster and RF alike, uses 4x100 on a 54.1 mm hub, with M12 x 1.5 wheel nuts: wheelfitment.eu, koleso.ee and SCC give these measurements, each cited in the table; hubcentric-rings.com gives a different PCD, which we do not use. The tightening torque is not published: only one database gives it, and we have not read a Mazda manual that confirms it.

16 or 17 inches, an offset of 45 throughout

The vehicle type record of the Swiss Federal Roads Office (ASTRA), the document that sets the tyre and wheel combinations a car may carry, permits the same wheel on both axles of the MX-5, always with an offset of 45. The 1.5 runs on a 6.5J x 16 wheel with 195/50 R16 tyres; since the December 2022 records, a 7J x 16 wheel is also permitted. The 2.0 runs on a 7J x 17 wheel with 205/45 R17 tyres, and the 118 kW 2.0 also permitted the 16-inch wheel. A wider wheel or a lower offset brings the wheel closer to the wing, on a car whose wheel arches are tight.

A light car: the load per wheel

The record for the 135 kW 2.0 roadster gives it a permissible load of 645 kg on the front axle and 615 kg on the rear axle, i.e. 322.5 and 307.5 kg per wheel; the RF carries a little more at the rear (660 kg). That is the load the wheel must carry, and the tyre must keep at least the load index of the original fitment, 84 (reading a tyre (page in French)).

What these measurements say about a forged wheel

The offset positions the wheel in the wheel arch: a wider wheel, or a lower offset, brings it closer to the wing. The Onyx Forged design office starts from the measurements on this page, your brakes and your tyres to calculate the width and offset of your wheels, then submits them to you. The offset calculator compares two fitments: it compares, it does not choose the measurement for you.

Roadworthiness test: what is examined

The French roadworthiness test (contrôle technique) examines the wheel without removing it (cracks, deformation, a wheel that protrudes beyond the bodywork) and verifies that the tyre size is one provided for by the manufacturer or accepted as equivalent. Keeping a tyre size from the original fitment, and at least its load index, avoids having to justify it; the details are on the roadworthiness test and registration page.

What we record before machining

Configure your forged wheels for the Mazda MX-5 (ND)

The Onyx Forged design office works out the measurements of your car from its exact version, stated on the registration document, and shows them to you before machining. Each set is cut from forged 6061-T6 aluminium, machined on a 5-axis CNC centre, as monoblock, two-piece or three-piece wheels; our wheels are designed to JWL/VIA standards. Prices by diameter and the lead time are given on this page, under “What Onyx can make”. Start your configuration or write to contact@onyxforgedwheels.com.

Configure custom wheels for your Mazda MX-5 ND: free 3D render, on request.

Useful guides

See all generations of the Mazda MX-5, or all Mazda models.