Onyx Forged
FREN

Custom forged wheels for Polestar 2 first generation (2020-present)

Technical specifications

Production period
2020-present

Original fitment measurements: Polestar 2 first generation

The measurements of the car as delivered new, to identify yours and compare. Each value refers, by a number, to the sources that give it. They are not a recommendation: Onyx does not advise any specific offset.

Hub

MeasurementOriginal value
PCD (bolt pattern)5x108 [1, 2, 3, 4, 5, 6, 7]
Centre bore63.4 mm [1, 3, 4, 5, 6, 7]
ThreadM14 x 1.5 [1, 2, 4, 5, 6, 7]
FixingWheel bolts [1, 2, 4, 6, 7, 8, 9]
Bolt or nut seat60° conical [1, 2]
Tightening torque140 Nm [1, 2, 3, 4, 7, 8, 9]

“Not published”: no source gives it with the certainty we require at this stage (see the rule below).

Original fitments by version

Version and fitmentFrontRear
DiameterWidthOriginal offset (manufacturer)TyreDiameterWidthOriginal offset (manufacturer)Tyre
Polestar 2 with two motors, 300 and 350 kW (408 and 476 PS), all-wheel drive (records from 2020 to 2022), 19 inches, original equipment19″ [10, 11, 12, 13]8J [10, 11, 12, 13]ET 50 [10, 11, 12, 13]245/45 R19 [10, 11, 12, 13]19″ [10, 11, 12, 13]9J [10, 11, 12, 13]ET 53 [10, 11, 12, 13]245/45 R19 [10, 11, 12, 13]
Polestar 2 with two motors, 300 and 350 kW (408 and 476 PS), all-wheel drive (records from 2020 to 2022), 20 inches, original equipment20″ [10, 11, 12, 13]8J [10, 11, 12, 13]ET 50 [10, 11, 12, 13]245/40 R20 [10, 11, 12, 13]20″ [10, 11, 12, 13]9J [10, 11, 12, 13]ET 53 [10, 11, 12, 13]245/40 R20 [10, 11, 12, 13]
Polestar 2 with two motors, 300 and 350 kW (408 and 476 PS), all-wheel drive (records from 2020 to 2022), 21 inches, original equipment21″ [11, 12, 13]8.5J [11, 12, 13]ET 50 [11, 12, 13]245/35 R21 [11, 12, 13]21″ [11, 12, 13]9J [11, 12, 13]ET 53 [11, 12, 13]245/35 R21 [11, 12, 13]
Polestar 2 with one motor, 165 and 170 kW (224 and 231 PS), front-wheel drive (2021 records), 19 inches, original equipment19″ [14, 15, 16]8J [14, 15, 16]ET 50 [14, 15, 16]245/45 R19 [14, 15, 16]19″ [14, 15, 16]9J [14, 15, 16]ET 53 [14, 15, 16]245/45 R19 [14, 15, 16]
Polestar 2 with one motor, 165 and 170 kW (224 and 231 PS), front-wheel drive (2021 records), 20 inches, original equipment20″ [14, 15, 16]8J [14, 15, 16]ET 50 [14, 15, 16]245/40 R20 [14, 15, 16]20″ [14, 15, 16]9J [14, 15, 16]ET 53 [14, 15, 16]245/40 R20 [14, 15, 16]
Polestar 2 with one motor, 165 and 170 kW (224 and 231 PS), front-wheel drive (2021 records), 21 inches, original equipment21″ [14, 16]8.5J [14, 16]ET 50 [14, 16]245/35 R21 [14, 16]21″ [14, 16]9J [14, 16]ET 53 [14, 16]245/35 R21 [14, 16]
Polestar 2 facelift: one motor, 200 and 220 kW (272 and 299 PS), rear-wheel drive; two motors, 310 and 350 kW (421 and 476 PS), all-wheel drive (2023 and 2024 records), 19 inches, original equipment19″ [17, 18, 19, 20, 21, 22]8J [17, 18, 19, 20, 21, 22]ET 50 [17, 18, 19, 20, 21, 22]245/45 R19 [17, 18, 19, 20, 21, 22]19″ [17, 18, 19, 20, 21, 22]9J [17, 18, 19, 20, 21, 22]ET 53 [17, 18, 19, 20, 21, 22]245/45 R19 [17, 18, 19, 20, 21, 22]
Polestar 2 facelift: one motor, 200 and 220 kW (272 and 299 PS), rear-wheel drive; two motors, 310 and 350 kW (421 and 476 PS), all-wheel drive (2023 and 2024 records), 20 inches, original equipment20″ [17, 18, 19, 20, 21, 22]8J [17, 18, 19, 20, 21, 22]ET 50 [17, 18, 19, 20, 21, 22]245/40 R20 [17, 18, 19, 20, 21, 22]20″ [17, 18, 19, 20, 21, 22]9J [17, 18, 19, 20, 21, 22]ET 53 [17, 18, 19, 20, 21, 22]245/40 R20 [17, 18, 19, 20, 21, 22]
Polestar 2 facelift: one motor, 200 and 220 kW (272 and 299 PS), rear-wheel drive; two motors, 310 and 350 kW (421 and 476 PS), all-wheel drive (2023 and 2024 records), 21 inches, original equipment21″ [17, 18, 19, 20, 21, 22]8.5J [17, 18, 19, 20, 21, 22]ET 50 [17, 18, 19, 20, 21, 22]245/35 R21 [17, 18, 19, 20, 21, 22]21″ [17, 18, 19, 20, 21, 22]9J [17, 18, 19, 20, 21, 22]ET 53 [17, 18, 19, 20, 21, 22]245/35 R21 [17, 18, 19, 20, 21, 22]

The offsets are the original ones, given by the manufacturer or by the sources cited; they help you identify your car's fitment.

What Onyx can make for the Polestar 2 first generation

Custom forged wheels in forged 6061-T6 aluminium, designed to JWL/VIA standards, in monoblock or two-piece construction; three-piece wheels are made on quotation.

The diameters below start at the smallest original diameter recorded on this car (19″) and go up to 24″.

DiameterMonoblock, set of four wheelsTwo-piece, set of four wheels
19″€3,200
Great Britain: £3,336 with UK import VAT		€4,300
Great Britain: £4,482 with UK import VAT
20″€3,300
Great Britain: £3,440.40 with UK import VAT		€4,400
Great Britain: £4,586.40 with UK import VAT
21″€3,550
Great Britain: £3,700.80 with UK import VAT		€4,750
Great Britain: £4,951.20 with UK import VAT
22″€3,750
Great Britain: £3,908.40 with UK import VAT		€5,200
Great Britain: £5,420.40 with UK import VAT
23″€3,950
Great Britain: £4,117.20 with UK import VAT		€5,750
Great Britain: £5,992.80 with UK import VAT
24″€4,100
Great Britain: £4,273.20 with UK import VAT		€6,300
Great Britain: £6,566.40 with UK import VAT

Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Wheels delivered in 4 to 8 working weeks, shipping included, from full payment for an order on the website, or from the deposit for an order on quotation, and at the earliest from your approval of the measurements, the colour or the 3D render you asked for, under article 5.1 of the Terms and Conditions.

The offset and width of your wheels do not come from a table: the Onyx Forged design office calculates them for your car and your brakes, and submits them to you before machining.

Configure wheels for the Polestar 2 first generation

Frequently asked questions: wheels for the Polestar 2 first generation

What are the original offsets for the wheels of a Polestar 2?

According to its Swiss vehicle type records, the rear wheel is wider than the front wheel, with the same tyre on both axles: 8J with an offset of 50 at the front and 9J with an offset of 53 at the rear, in both 19 and 20 inches; in 21 inches, 8.5J with an offset of 50 at the front and 9J with an offset of 53 at the rear. The 21-inch size is permitted from the May 2021 records, except on the 165 kW version. Polestar's owner's manuals give the same 19 and 20-inch wheels, and state that the front wheels must not swap places with the rear wheels. [10, 11, 15, 19, 23, 24]

Which tyres, and which load index, does a Polestar 2 take?

245/45 R19, 245/40 R20 or 245/35 R21, the same size on all four wheels, all with load index 99, i.e. 775 kg per tyre, and speed rating H: these are the combinations in its Swiss vehicle type records, from 2020 to 2024. [10, 11, 22, 25]

What is the load per wheel on a Polestar 2?

The Swiss vehicle type record of the 2020 two-motor version gives it a permissible load of 1,290 kg on the front axle and 1,410 kg on the rear axle, i.e. 645 and 705 kg per wheel; that of the facelifted 220 kW rear-wheel-drive version, 1,140 kg at the front and 1,390 kg at the rear, i.e. 695 kg per rear wheel. The tyre with load index 99 carries 775 kg. [10, 17, 25]

What PCD, centre bore and bolts does a Polestar 2 use?

The PCD is 5x108, the centre bore 63.4 mm, and the wheels are held by M14 x 1.5 bolts with a 60° conical seat: SCC, wheelfitment.eu, hubcentric-rings.com, koleso.ee and two German general operating permits (Allgemeine Betriebserlaubnis) for wheels, one of them for a Polestar accessory wheel, give these measurements. Polestar's owner's manuals set the tightening torque of the bolts at 140 Nm, with no lubricant on the threads. [1, 2, 3, 4, 5, 6, 7, 8, 9]

Which brakes does a Polestar 2 have?

According to Polestar, it has two-piston aluminium calipers on 345 x 30 mm ventilated discs at the front, and, with the Performance pack, four-piston Brembo front calipers on 375 x 35 mm discs. Polestar's 2021 manual states that the standard 19 and 20-inch wheels are not suitable for cars fitted with the Performance Pack. [23, 26, 27]

Sources for the measurements and answers

  1. Gutachten 366-0229-22-WIRD for ABE 54577, TAR0M wheel (Hersteller ALCAR WHEELS GmbH, Fahrzeughersteller POLESTAR PERFORMANCE AB), Stand 19.07.2023 (secondary source, consulted on 20 October 2026)
  2. Ronal, Gutachten RA-000895-F0-104 (Nachtrag 5 zur ABE-Nr. 51100, Anlage 33c), wheel 62R0855 8½Jx20H2 ET50, signed in Essen on 17.01.2022 (secondary source, consulted on 20 October 2026)
  3. hubcentric-rings.com, Polestar 2 (2020–) (secondary source, consulted on 20 October 2026)
  4. koleso.ee, Polestar 2 2020 .. 2023 (Long range Dual motor 300 and 350 kW, Long range and Standard range Single motor 170 kW) (secondary source, consulted on 20 October 2026)
  5. koleso.ee, Polestar 2 Facelift [2024 .. 2026] (Long range Dual motor 310 and 335 kW, Long range Single motor 220 kW, Standard range Single motor 200 kW) (secondary source, consulted on 20 October 2026)
  6. SCC Fahrzeugtechnik (spurverbreiterung.de), Polestar 2 type 534, 2019- (secondary source, consulted on 20 October 2026)
  7. wheelfitment.eu, Polestar 2 (2020 - ) (secondary source, consulted on 20 October 2026)
  8. Polestar, Polestar 2 - 2021 online owner's manual, article “Wheel bolts” (primary source, consulted on 20 October 2026)
  9. Polestar, Polestar 2 - 2024 online owner's manual (facelift model year), article “Wheel bolts” (primary source, consulted on 20 October 2026)
  10. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1PJ602 (Polestar 2, type V, variant VSED, 300 kW, all-wheel drive (two motors), May 2020): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
  11. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1PJ603 (Polestar 2, type V, variant VSED, 300 kW, all-wheel drive (two motors), May 2021): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
  12. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1PJ606 (Polestar 2, type V, variant VSED (VSEDEEP), 350 kW, all-wheel drive (two motors), October 2021): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
  13. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1PJ608 (Polestar 2, type V, variant VSET, 350 kW, all-wheel drive (two motors), June 2022): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
  14. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1PJ604 (Polestar 2, type V, variant VSEG, 170 kW, front-wheel drive (one motor), May 2021): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
  15. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1PJ605 (Polestar 2, type V, variant VSEC, 165 kW, front-wheel drive (one motor), May 2021): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
  16. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1PJ607 (Polestar 2, type V, variant VSEF, 170 kW, front-wheel drive (one motor), October 2021): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
  17. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1PJ609 (facelifted Polestar 2, type V, variant VSFE, 220 kW, rear-wheel drive (one motor), April 2023): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
  18. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1PJ610 (facelifted Polestar 2, type V, variant VSFD, 310 kW, all-wheel drive (two motors), April 2023): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
  19. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1PJ611 (facelifted Polestar 2, type V, variant VSFF, 350 kW, all-wheel drive (two motors), April 2023): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
  20. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1PJ612 (facelifted Polestar 2, type V, variant VSFC, 200 kW, rear-wheel drive (one motor), October 2023): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
  21. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1PJ619 (facelifted Polestar 2, type V, variant VSEU, 200 kW, rear-wheel drive (one motor), June 2024): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
  22. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1PJ622 (facelifted Polestar 2, type V, variant VSFF, 350 kW, all-wheel drive (two motors), June 2024): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
  23. Polestar, Polestar 2 - 2021 online owner's manual, article “Approved wheel and tyre sizes” (primary source, consulted on 20 October 2026)
  24. Polestar, Polestar 2 - 2024 online owner's manual, article “Approved wheel and tyre sizes” (primary source, consulted on 20 October 2026)
  25. Fiches-auto.fr, tyre load index table (index → kg) (reference table, for a conversion, consulted on 3 October 2026)
  26. Polestar (official website, United Kingdom), specifications of the Polestar 2 on sale (MY25-MY26): standard brakes with 2-piston aluminium calipers, ventilated discs 345x30 mm front and 340x20 mm rear; Performance pack (primary source, consulted on 20 October 2026)
  27. Polestar Global Media Newsroom, press release “Polestar 2 Performance Pack in detail” dated 2020.06.23 (primary source, consulted on 20 October 2026)

Publication rule: a measurement is shown only if a primary source gives it (a manufacturer's document, an official vehicle type record, an original parts catalogue, the maker of the original wheel) without another primary source contradicting it, or if two independent specialist sources agree without a primary source contradicting them. The press and forums do not count. Measurements checked on 20 October 2026 by the Onyx Forged design office.

Designs for this generation

Three models from our catalogue, forged to measure for your Polestar 2 first generation. The price is for a set of four wheels: it depends on the construction and the diameter.

Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Find my wheel · All 24 designs in the catalogue

See these wheels on your car

Custom forged wheels for the Polestar 2 first generation

  • Forged 6061-T6 aluminium
  • 5-axis CNC machining
  • Designed to JWL/VIA standards
  • Fitment worked out for your Polestar 2 first generation

Polestar 2: 5x108, a 63.4 mm hub, M14 x 1.5 bolts

The Polestar 2, which Polestar put into production in March 2020 and whose facelift for the 2024 model year it announced in June 2023, uses 5x108 on a 63.4 mm hub, with M14 x 1.5 wheel bolts that have a 60° conical seat: SCC, wheelfitment.eu, hubcentric-rings.com, koleso.ee and two German operating permits for wheels, one of them for a Polestar accessory wheel, give these measurements, each cited in the table. Polestar's owner's manuals set the tightening torque of the bolts at 140 Nm, with no lubricant on the threads.

The same tyre on both axles, a wider rear wheel

The vehicle type record of the Swiss Federal Roads Office (ASTRA), the document that sets the tyre and wheel combinations a car may carry, permits a fitment for the Polestar 2 in which only the wheel changes from one axle to the other: 8J with an offset of 50 at the front and 9J with an offset of 53 at the rear, in both 19 inches (245/45 R19) and 20 inches (245/40 R20), and, from the May 2021 records, 8.5J and 9J in 21 inches (245/35 R21), except on the 165 kW version. Polestar's manual puts it in its own way: the front wheels must not swap places with the rear wheels.

Brakes: the Performance pack changes the wheel

Polestar specifies two-piston aluminium calipers as standard, on 345 x 30 mm discs at the front; with the Performance pack, four-piston Brembo front calipers on 375 x 35 mm discs. Its 2021 manual states that the standard 19 and 20-inch wheels are not suitable for cars fitted with this pack: the Onyx Forged design office starts from your calipers.

What a heavy, powerful electric car changes

The record for the 2020 two-motor version gives it a permissible load of 1,290 kg on the front axle and 1,410 kg on the rear axle, i.e. 705 kg per rear wheel, and all its original tyres have load index 99, which carries 775 kg: a replacement tyre must keep at least this index. The torque, available from the first turn of the wheel, and the mass wear tyres faster than on a combustion car of the same power; the tyre also affects cabin noise and range. A tyre marked HL (High Load) carries more at the same size. The guide electric car tyres: wear, HL index, noise and range (page in French) explains what each choice changes, and the guide wheels for a heavy car: the load per wheel (page in French) how to read the load the wheel must carry.

What these measurements say about a forged wheel

The offset positions the wheel in the wheel arch: a wider wheel, or a lower offset, brings it closer to the wing. The Onyx Forged design office starts from the measurements on this page, your brakes and your tyres to calculate the width and offset of your wheels, then submits them to you. The offset calculator compares two fitments: it compares, it does not choose the measurement for you.

Roadworthiness test: what is examined

The French roadworthiness test (contrôle technique) examines the wheel without removing it (cracks, deformation, a wheel that protrudes beyond the bodywork) and verifies that the tyre size is one provided for by the manufacturer or accepted as equivalent. Keeping a tyre size from the original fitment, and at least its load index, avoids having to justify it; the details are on the roadworthiness test and registration page.

What we record before machining

Configure your forged wheels for the Polestar 2

The Onyx Forged design office works out the measurements of your car from its exact version, stated on the registration document, and shows them to you before machining. Each set is cut from forged 6061-T6 aluminium, machined on a 5-axis CNC centre, as monoblock, two-piece or three-piece wheels; our wheels are designed to JWL/VIA standards. Prices by diameter and the lead time are given on this page, under “What Onyx can make”. Start your configuration or write to contact@onyxforgedwheels.com.

Configure custom wheels for your Polestar 2 first generation: free 3D render, on request.

Useful guides

See all Polestar models.