Custom forged wheels for Hyundai i30 N (PDe) (2017-2024)

Technical specifications

Production period: 2017-2024

Original fitment measurements: Hyundai i30 N (PDe)

The measurements of the car as delivered new, to identify yours and compare. Each value refers, by a number, to the sources that give it. They are not a recommendation: Onyx does not advise any specific offset.

Hub

Measurement	Original value
PCD (bolt pattern)	5x114.3^{[1, 2, 3, 4]}
Centre bore	67.1 mm^{[1, 2, 3, 4]}
Thread	M12 x 1.5^{[1, 3, 4]}
Fixing	Wheel nuts^{[1, 3, 4]}
Bolt or nut seat	Not published
Tightening torque	Not published

“Not published”: no source gives it with the certainty we require at this stage (see the rule below).

Original fitments by version

Version and fitment	Front				Rear
Version and fitment	Diameter	Width	Original offset (manufacturer)	Tyre	Diameter	Width	Original offset (manufacturer)	Tyre
i30 N, 184 kW (250 PS), 18 inches, original equipment	18″^{[5, 6]}	7.5J^{[5, 6]}	ET 53^[5]	225/40 R18^{[5, 6]}	18″^{[5, 6]}	7.5J^{[5, 6]}	ET 53^[5]	225/40 R18^{[5, 6]}
i30 N, 202 kW (275 PS), 5-door and Fastback, 19 inches, original equipment	19″^{[6, 7, 8, 9]}	8J^{[6, 7, 8, 9]}	ET 55^{[7, 8, 9]}	235/35 R19^{[6, 7, 8, 9]}	19″^{[6, 7, 8, 9]}	8J^{[6, 7, 8, 9]}	ET 55^{[7, 8, 9]}	235/35 R19^{[6, 7, 8, 9]}
facelifted i30 N, 206 kW (280 PS), 19 inches, original equipment	19″^{[6, 10, 11]}	8J^{[6, 10, 11]}	ET 55^{[10, 11]}	235/35 R19^{[6, 10, 11]}	19″^{[6, 10, 11]}	8J^{[6, 10, 11]}	ET 55^{[10, 11]}	235/35 R19^{[6, 10, 11]}
i30 N, 202 kW (2019) and 206 kW, winter tyres, 18 inches, winter tyres, original equipment (winter tyres)	18″^{[9, 10, 11]}	7.5J^{[9, 10, 11]}	ET 53^{[9, 10, 11]}	225/40 R18^{[9, 10, 11]}	18″^{[9, 10, 11]}	7.5J^{[9, 10, 11]}	ET 53^{[9, 10, 11]}	225/40 R18^{[9, 10, 11]}

The offsets are the original ones, given by the manufacturer or by the sources cited; they help you identify your car's fitment.

What Onyx can make for the Hyundai i30 N (PDe)

Custom forged wheels in forged 6061-T6 aluminium, designed to JWL/VIA standards, in monoblock or two-piece construction; three-piece wheels are made on quotation.

The diameters below start at the smallest original diameter recorded on this car (18″) and go up to 24″.

Diameter	Monoblock, set of four wheels	Two-piece, set of four wheels
18″	€3,200 Great Britain: £3,336 with UK import VAT	€4,300 Great Britain: £4,482 with UK import VAT
19″	€3,200 Great Britain: £3,336 with UK import VAT	€4,300 Great Britain: £4,482 with UK import VAT
20″	€3,300 Great Britain: £3,440.40 with UK import VAT	€4,400 Great Britain: £4,586.40 with UK import VAT
21″	€3,550 Great Britain: £3,700.80 with UK import VAT	€4,750 Great Britain: £4,951.20 with UK import VAT
22″	€3,750 Great Britain: £3,908.40 with UK import VAT	€5,200 Great Britain: £5,420.40 with UK import VAT
23″	€3,950 Great Britain: £4,117.20 with UK import VAT	€5,750 Great Britain: £5,992.80 with UK import VAT
24″	€4,100 Great Britain: £4,273.20 with UK import VAT	€6,300 Great Britain: £6,566.40 with UK import VAT

Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Wheels delivered in 4 to 8 working weeks, shipping included, from full payment for an order on the website, or from the deposit for an order on quotation, and at the earliest from your approval of the measurements, the colour or the 3D render you asked for, under article 5.1 of the Terms and Conditions.

The offset and width of your wheels do not come from a table: the Onyx Forged design office calculates them for your car and your brakes, and submits them to you before machining.

Configure wheels for the Hyundai i30 N (PDe)

Frequently asked questions: wheels for the Hyundai i30 N (PDe)

What are the original offsets for the wheels of a Hyundai i30 N?

According to the Swiss vehicle type records: 7.5J x 18 with an offset of 53 on the 184 kW i30 N, and 8J x 19 with an offset of 55 on the 202 and 206 kW cars, on both axles. The 202 kW (from 2019) and 206 kW versions also take the 18-inch wheel with winter tyres.^{[5, 7, 9, 10]}

Which tyres, and which load index, does a Hyundai i30 N take?

225/40 ZR18 with load index 92, i.e. 630 kg per tyre, on the 18-inch wheel, and 235/35 R19 with load index 91, i.e. 615 kg, on the 19-inch wheel: these are the combinations in the Swiss vehicle type records, and Hyundai's owner's manual gives the same sizes.^{[5, 6, 7, 12]}

What is the load per wheel on a Hyundai i30 N?

Its Swiss vehicle type records give it a permissible load of 1,090 kg on the front axle, i.e. 545 kg per front wheel, and 980 kg on the rear axle. The 235/35 R19 tyre with load index 91 carries 615 kg.^{[7, 10, 12]}

What PCD (bolt pattern), centre bore and nuts does a Hyundai i30 N use?

The PCD is 5x114.3, the centre bore 67.1 mm, and the wheels are held by M12 x 1.5 nuts: the German operating permits (Allgemeine Betriebserlaubnis) for OZ and DBV wheels, which name the i30 N, and SCC give these measurements. Hyundai gives a tightening torque of 11 to 13 kgf·m, i.e. 107 to 127 N·m.^{[1, 3, 4, 6]}

Same fixing measurements

As original equipment, these cars have the same PCD, centre bore, thread and fixing as the Hyundai i30 N (PDe): PCD 5x114.3, centre bore 67.1 mm, thread M12 x 1.5, fixing: wheel nuts.

Kia EV6 GT (since 2022)

Same fixing measurements; original diameters and offsets: see each car's page. The seat of the bolts or nuts, the width of the wheels and brake clearance are not compared here: this comparison is not an opinion on compatibility.

Sources for the measurements and answers

DBV, German general operating permit for a wheel (ABE 53975) listing the Hyundai i30 N and i30 N Performance: PCD and centre bore, nuts (secondary source, consulted on 20 October 2026)
hubcentric-rings.com, Hyundai i30 by generation (“PD (2017–)” row) (secondary source, consulted on 20 October 2026)
OZ, German general operating permit for a wheel (ABE 54940) listing the Hyundai i30 N (184 kW) and i30 N Performance (202 and 206 kW), 2020 facelift included: PCD and centre bore, nuts (secondary source, consulted on 20 October 2026)
SCC Fahrzeugtechnik (spurverbreiterung.de), Hyundai i30, 3rd generation (PD/PDE), 2017 onwards (secondary source, consulted on 20 October 2026)
Swiss Federal Roads Office (ASTRA), vehicle type record no. 1HC207 (Hyundai i30 N 2.0 T-GDI, type PDE, 184 kW, 5-door, August 2017): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
Hyundai, i30 N owner's manual, 5-door and Fastback (“Copyright 2022” edition) (primary source, consulted on 20 October 2026)
Swiss Federal Roads Office (ASTRA), vehicle type record no. 1HC208 (Hyundai i30 N 2.0 T-GDI, type PDE, 202 kW, 5-door, August 2017): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
Swiss Federal Roads Office (ASTRA), vehicle type record no. 1HC302 (Hyundai i30 N 2.0 T-GDI, type PDE, 202 kW, Fastback, October 2018): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
Swiss Federal Roads Office (ASTRA), vehicle type record no. 1HC416 (Hyundai i30 N 2.0 T-GDI, type PDE, 202 kW, 5-door, November 2019): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
Swiss Federal Roads Office (ASTRA), vehicle type record no. 1HC540 (Hyundai i30 N 2.0 T-GDI, type PDE, 206 kW, 5-door, November 2021): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
Swiss Federal Roads Office (ASTRA), vehicle type record no. 1HC565 (Hyundai i30 N 2.0 T-GDI, type PDE, 206 kW, 5-door, August 2023): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
Fiches-auto.fr, tyre load index table (index → kg) (reference table, for a conversion, consulted on 3 October 2026)

Publication rule: a measurement is shown only if a primary source gives it (a manufacturer's document, an official vehicle type record, an original parts catalogue, the maker of the original wheel) without another primary source contradicting it, or if two independent specialist sources agree without a primary source contradicting them. The press and forums do not count. Measurements checked on 20 October 2026 by the Onyx Forged design office.

Designs for this generation

Three models from our catalogue, forged to measure for your Hyundai i30 N (PDe). The price is for a set of four wheels: it depends on the construction and the diameter.

Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Find my wheel · All 24 designs in the catalogue

See these wheels on your car

Custom forged wheels for the Hyundai i30 N (PDe)

Forged 6061-T6 aluminium
5-axis CNC machining
Designed to JWL/VIA standards
Fitment worked out for your Hyundai i30 N (PDe)

i30 N: 5x114.3, a 67.1 mm hub, M12 x 1.5 nuts

The Hyundai i30 N (PDe generation), produced from 2017 to 2024 as a 5-door and a Fastback, uses 5x114.3 on a 67.1 mm hub, with M12 x 1.5 wheel nuts: the German operating permits (Allgemeine Betriebserlaubnis) for OZ and DBV wheels, which name the i30 N, and SCC give these measurements. For the nuts, Hyundai gives a tightening torque of 11 to 13 kgf·m, i.e. 107 to 127 N·m.

Two fitments, depending on power

The Swiss vehicle type records permit, on both axles, a 7.5J x 18 wheel with an offset of 53 and 225/40 ZR18 tyres on the 184 kW i30 N, and an 8J x 19 wheel with an offset of 55 and 235/35 R19 tyres on the 202 and 206 kW cars, in 5-door as well as Fastback form. Hyundai's owner's manual gives the same sizes. From 2019, the 18-inch wheel is also permitted on the 202 and 206 kW versions, with winter tyres.

What these measurements say about a forged wheel

The offset positions the wheel in the wheel arch: a wider wheel, or a lower offset, brings it closer to the wing. The Onyx Forged design office starts from the measurements on this page, your brakes and your tyres to calculate the width and offset of your wheels, then submits them to you. The offset calculator compares two fitments: it compares, it does not choose the measurement for you.

What we record before machining

The exact version, stated on the registration document, and the current diameter of your wheels.
The braking system, on which the smallest possible diameter depends (wheels and brakes (page in French)).
The current fitment, axle by axle, and the hub's 67.1 mm centre bore.

Configure your forged wheels for the Hyundai i30 N

The Onyx Forged design office works out the measurements of your car from its exact version, stated on the registration document, and shows them to you before machining. Each set is cut from forged 6061-T6 aluminium, machined on a 5-axis CNC centre, as monoblock, two-piece or three-piece wheels; our wheels are designed to JWL/VIA standards. Prices by diameter and the lead time are given on this page, under “What Onyx can make”. Start your configuration or write to contact@onyxforgedwheels.com.

Configure custom wheels for your Hyundai i30 N (PDe): free 3D render, on request.

Useful guides

See all generations of the Hyundai i30, or all Hyundai models.