Custom forged wheels for Toyota GR Yaris first generation (2020-present)
Technical specifications
- Production period
- 2020-present
Original fitment measurements: Toyota GR Yaris first generation
The measurements of the car as delivered new, to identify yours and compare. Each value refers, by a number, to the sources that give it. They are not a recommendation: Onyx does not advise any specific offset.
Hub
| Measurement | Original value |
|---|---|
| PCD (bolt pattern) | 5x114.3 [1, 2, 3] |
| Centre bore | 60.1 mm [1, 2, 3] |
| Thread | M12 x 1.5 [1, 2, 3] |
| Fixing | Wheel nuts [1, 2, 3] |
| Bolt or nut seat | Not published |
| Tightening torque | 103 Nm [4] |
“Not published”: no source gives it with the certainty we require at this stage (see the rule below).
Original fitments by version
| Version and fitment | Front | Rear | ||||||
|---|---|---|---|---|---|---|---|---|
| Diameter | Width | Original offset (manufacturer) | Tyre | Diameter | Width | Original offset (manufacturer) | Tyre | |
| GR Yaris, 192 kW (261 PS), all-wheel drive, 18 inches, original equipment | 18″ [5, 6] | 8J [5, 6] | ET 45 [5, 6] | 225/40 R18 [5, 6] | 18″ [5, 6] | 8J [5, 6] | ET 45 [5, 6] | 225/40 R18 [5, 6] |
| Facelifted GR Yaris, 206 kW (280 PS), all-wheel drive, 18 inches, original equipment | 18″ [6, 7, 8] | 8J [6, 7, 8] | ET 45 [6, 7, 8] | 225/40 R18 [6, 7, 8] | 18″ [6, 7, 8] | 8J [6, 7, 8] | ET 45 [6, 7, 8] | 225/40 R18 [6, 7, 8] |
The offsets are the original ones, given by the manufacturer or by the sources cited; they help you identify your car's fitment.
What Onyx can make for the Toyota GR Yaris first generation
Custom forged wheels in forged 6061-T6 aluminium, designed to JWL/VIA standards, in monoblock or two-piece construction; three-piece wheels are made on quotation.
The diameters below start at the smallest original diameter recorded on this car (18″) and go up to 24″.
| Diameter | Monoblock, set of four wheels | Two-piece, set of four wheels |
|---|---|---|
| 18″ | €3,200 Great Britain: £3,336 with UK import VAT | €4,300 Great Britain: £4,482 with UK import VAT |
| 19″ | €3,200 Great Britain: £3,336 with UK import VAT | €4,300 Great Britain: £4,482 with UK import VAT |
| 20″ | €3,300 Great Britain: £3,440.40 with UK import VAT | €4,400 Great Britain: £4,586.40 with UK import VAT |
| 21″ | €3,550 Great Britain: £3,700.80 with UK import VAT | €4,750 Great Britain: £4,951.20 with UK import VAT |
| 22″ | €3,750 Great Britain: £3,908.40 with UK import VAT | €5,200 Great Britain: £5,420.40 with UK import VAT |
| 23″ | €3,950 Great Britain: £4,117.20 with UK import VAT | €5,750 Great Britain: £5,992.80 with UK import VAT |
| 24″ | €4,100 Great Britain: £4,273.20 with UK import VAT | €6,300 Great Britain: £6,566.40 with UK import VAT |
Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.
Wheels delivered in 4 to 8 working weeks, shipping included, from full payment for an order on the website, or from the deposit for an order on quotation, and at the earliest from your approval of the measurements, the colour or the 3D render you asked for, under article 5.1 of the Terms and Conditions.
The offset and width of your wheels do not come from a table: the Onyx Forged design office calculates them for your car and your brakes, and submits them to you before machining.
Frequently asked questions: wheels for the Toyota GR Yaris first generation
What is the original offset for the wheels of a Toyota GR Yaris?
An offset of 45, on an 8J x 18 wheel, on both axles: this is the combination in the Swiss vehicle type records, before and after the 2024 facelift. Toyota (Japan) states that this wheel exists in a forged version by BBS and a cast version by ENKEI, with the same offset. [5, 6, 7, 8]
Which tyres, and which load index, does a Toyota GR Yaris take?
225/40 R18, with load index 88, i.e. 560 kg per tyre, or as a ZR tyre with load index 92, i.e. 630 kg: these are the two tyres permitted by the Swiss vehicle type records on the 18-inch wheel. [5, 7, 9]
What is the load per wheel on a Toyota GR Yaris?
Its Swiss vehicle type records give it a permissible load of 970 kg on the front axle, i.e. 485 kg per front wheel, and of 900 kg on the rear axle. The 225/40 R18 tyre with load index 88 carries 560 kg. [5, 7, 9]
What PCD (bolt pattern), centre bore and nuts does a Toyota GR Yaris use?
The PCD is 5x114.3, the centre bore 60.1 mm, and the wheels are held by M12 x 1.5 nuts: SCC and the German general operating permits (Allgemeine Betriebserlaubnis) for Borbet and Ronal wheels give these measurements; Toyota (Japan) gives a centre bore of about 60 mm. The Toyota owner's manual sets the tightening torque of the nuts at 103 N·m. [1, 2, 3, 4, 6]
Sources for the measurements and answers
- Borbet, German general operating permit for a wheel (ABE 55538) listing the Toyota Yaris GR, type XPA1G, 192 to 206 kW: PCD, spigot ring, nuts (secondary source, consulted on 20 October 2026)
- Ronal, German general operating permit for a wheel (ABE 52372) listing the Toyota Yaris GR: PCD, spigot ring, nuts (secondary source, consulted on 20 October 2026)
- SCC Fahrzeugtechnik (spurverbreiterung.de), Toyota Yaris GR, XPA1G, 2020 onwards (secondary source, consulted on 20 October 2026)
- Toyota (Japan), GR Yaris owner's manual (2020/09 edition), changing a wheel (primary source, consulted on 20 October 2026)
- Swiss Federal Roads Office (ASTRA), vehicle type record no. 1TB179 (Toyota GR Yaris, type XPA1G, 192 kW, all-wheel drive, September 2020): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
- Toyota (Japan), answer to the question “tyre and wheel sizes fitted on the production line”, GR Yaris from March 2024: tyre, forged BBS or cast ENKEI wheel with its offset, by trim (Japanese market) (primary source, consulted on 20 October 2026)
- Swiss Federal Roads Office (ASTRA), vehicle type record no. 1TB763 (Toyota GR Yaris, type XPA1G, 206 kW, all-wheel drive, April 2024): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
- Swiss Federal Roads Office (ASTRA), vehicle type record no. 1TB764 (Toyota GR Yaris, type XPA1G, 206 kW, all-wheel drive, other variant, April 2024): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
- Fiches-auto.fr, tyre load index table (index → kg) (reference table, for a conversion, consulted on 3 October 2026)
Publication rule: a measurement is shown only if a primary source gives it (a manufacturer's document, an official vehicle type record, an original parts catalogue, the maker of the original wheel) without another primary source contradicting it, or if two independent specialist sources agree without a primary source contradicting them. The press and forums do not count. Measurements checked on 20 October 2026 by the Onyx Forged design office.
Designs for this generation
Three models from our catalogue, forged to measure for your Toyota GR Yaris first generation. The price is for a set of four wheels: it depends on the construction and the diameter.
OX-DS1 VortexMonoblock · From €3,200 for a set of four wheelsGreat Britain: from £3,336 with UK import VAT
OX-M15 SovereignMonoblock · From €3,200 for a set of four wheelsGreat Britain: from £3,336 with UK import VAT
OX-D10 ImperialTwo-piece · From €4,300 for a set of four wheelsGreat Britain: from £4,482 with UK import VAT
Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.
Custom forged wheels for the Toyota GR Yaris first generation
- Forged 6061-T6 aluminium
- 5-axis CNC machining
- Designed to JWL/VIA standards
- Fitment worked out for your Toyota GR Yaris first generation
GR Yaris: 5x114.3, a 60.1 mm hub, M12 x 1.5 nuts
The Toyota GR Yaris, produced since September 2020 and facelifted in March 2024 according to Toyota, uses 5x114.3 on a 60.1 mm hub, with M12 x 1.5 wheel nuts: SCC and the German general operating permits (Allgemeine Betriebserlaubnis) for Borbet and Ronal wheels give these measurements; Toyota gives a centre bore of about 60 mm. The Toyota owner's manual sets the tightening torque of the nuts at 103 N·m.
A single fitment: 8J x 18, offset of 45
The Swiss vehicle type records, from 2020 for the 192 kW GR Yaris and from 2024 for the facelifted 206 kW version, permit a single wheel, the same on both axles: 8J x 18 with an offset of 45, fitted with 225/40 R18 tyres. Toyota (Japan) states that this wheel exists in a forged version by BBS and a cast version by ENKEI, with the same offset.
A light wheel, on the road and on track
On a car of this weight, every kilo of wheel counts: the unsprung mass (page in French) guide explains what a lighter wheel changes, and track day (page in French) what to prepare before driving on a circuit. The record gives a permissible load of 970 kg on the front axle, i.e. 485 kg per front wheel.
What these measurements say about a forged wheel
The offset positions the wheel in the wheel arch: a wider wheel, or a lower offset, brings it closer to the wing. The Onyx Forged design office starts from the measurements on this page, your brakes and your tyres to calculate the width and offset of your wheels, then submits them to you. The offset calculator compares two fitments: it compares, it does not choose the measurement for you.
What we record before machining
- The exact version, stated on the registration document, and the current diameter of your wheels.
- The braking system, on which the smallest possible diameter depends (wheels and brakes (page in French)).
- The current fitment, axle by axle, and the 60.1 mm hub bore.
Configure your forged wheels for the Toyota GR Yaris
The Onyx Forged design office works out the measurements of your car from its exact version, stated on the registration document, and shows them to you before machining. Each set is cut from forged 6061-T6 aluminium, machined on a 5-axis CNC centre, as monoblock, two-piece or three-piece wheels; our wheels are designed to JWL/VIA standards. Prices by diameter and the lead time are given on this page, under “What Onyx can make”. Start your configuration or write to contact@onyxforgedwheels.com.
Configure custom wheels for your Toyota GR Yaris first generation: free 3D render, on request.
Useful guides
See all Toyota models.