Custom forged wheels for Honda Civic Type R (FK8) (2017-2021)

Technical specifications

Production period: 2017-2021

Original fitment measurements: Honda Civic Type R (FK8)

The measurements of the car as delivered new, to identify yours and compare. Each value refers, by a number, to the sources that give it. They are not a recommendation: Onyx does not advise any specific offset.

Hub

Measurement	Original value
PCD (bolt pattern)	5x120^{[1, 2, 3, 4]}
Centre bore	64.1 mm^{[1, 2, 3, 4]}
Thread	M14 x 1.5^{[1, 2, 3, 4]}
Fixing	Wheel nuts^{[2, 4, 5]}
Bolt or nut seat	Not published
Tightening torque	127 Nm^{[1, 2, 3, 4, 5]}

“Not published”: no source gives it with the certainty we require at this stage (see the rule below).

Original fitments by version

Version and fitment	Front				Rear
Version and fitment	Diameter	Width	Original offset (manufacturer)	Tyre	Diameter	Width	Original offset (manufacturer)	Tyre
Civic Type R (FK8), 235 kW (320 PS), front-wheel drive (records from 2017 to 2019), 20 inches, original equipment	20″^{[5, 6, 7, 8]}	8.5J^{[5, 6, 7, 8]}	ET 60^{[6, 7, 8]}	245/30 R20^{[5, 6, 7, 8]}	20″^{[5, 6, 7, 8]}	8.5J^{[5, 6, 7, 8]}	ET 60^{[6, 7, 8]}	245/30 R20^{[5, 6, 7, 8]}
Civic Type R (FK8), 235 kW (320 PS), front-wheel drive (records from 2017 to 2019), 18 inches, original equipment	18″^{[6, 7, 8]}	8J^{[6, 7, 8]}	ET 55^{[6, 7, 8]}	235/40 R18^{[6, 7, 8]}	18″^{[6, 7, 8]}	8J^{[6, 7, 8]}	ET 55^{[6, 7, 8]}	235/40 R18^{[6, 7, 8]}
Civic Type R (FK8), 235 kW (320 PS), front-wheel drive (2020 records, variants FK804 and FK805), 20 inches, original equipment	20″^{[9, 10]}	8.5J^{[9, 10]}	ET 60^{[9, 10]}	245/30 R20^{[9, 10]}	20″^{[9, 10]}	8.5J^{[9, 10]}	ET 60^{[9, 10]}	245/30 R20^{[9, 10]}
Civic Type R (FK8), 235 kW (320 PS), front-wheel drive (2020 records, variants FK804 and FK805), 19 inches, original equipment	19″^{[9, 10]}	8.5J^{[9, 10]}	ET 60^{[9, 10]}	245/35 R19^{[9, 10]}	19″^{[9, 10]}	8.5J^{[9, 10]}	ET 60^{[9, 10]}	245/35 R19^{[9, 10]}
Civic Type R (FK8), 235 kW (320 PS), front-wheel drive (2020 records, variants FK804 and FK805), 18 inches, original equipment	18″^{[9, 10]}	8J^{[9, 10]}	ET 55^{[9, 10]}	235/40 R18^{[9, 10]}	18″^{[9, 10]}	8J^{[9, 10]}	ET 55^{[9, 10]}	235/40 R18^{[9, 10]}

The offsets are the original ones, given by the manufacturer or by the sources cited; they help you identify your car's fitment.

What Onyx can make for the Honda Civic Type R (FK8)

Custom forged wheels in forged 6061-T6 aluminium, designed to JWL/VIA standards, in monoblock or two-piece construction; three-piece wheels are made on quotation.

The diameters below start at the smallest original diameter recorded on this car (18″) and go up to 24″.

Diameter	Monoblock, set of four wheels	Two-piece, set of four wheels
18″	€3,200 Great Britain: £3,336 with UK import VAT	€4,300 Great Britain: £4,482 with UK import VAT
19″	€3,200 Great Britain: £3,336 with UK import VAT	€4,300 Great Britain: £4,482 with UK import VAT
20″	€3,300 Great Britain: £3,440.40 with UK import VAT	€4,400 Great Britain: £4,586.40 with UK import VAT
21″	€3,550 Great Britain: £3,700.80 with UK import VAT	€4,750 Great Britain: £4,951.20 with UK import VAT
22″	€3,750 Great Britain: £3,908.40 with UK import VAT	€5,200 Great Britain: £5,420.40 with UK import VAT
23″	€3,950 Great Britain: £4,117.20 with UK import VAT	€5,750 Great Britain: £5,992.80 with UK import VAT
24″	€4,100 Great Britain: £4,273.20 with UK import VAT	€6,300 Great Britain: £6,566.40 with UK import VAT

Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Wheels delivered in 4 to 8 working weeks, shipping included, from full payment for an order on the website, or from the deposit for an order on quotation, and at the earliest from your approval of the measurements, the colour or the 3D render you asked for, under article 5.1 of the Terms and Conditions.

The offset and width of your wheels do not come from a table: the Onyx Forged design office calculates them for your car and your brakes, and submits them to you before machining.

Configure wheels for the Honda Civic Type R (FK8)

Frequently asked questions: wheels for the Honda Civic Type R (FK8)

What are the original offsets for the wheels of a Honda Civic Type R FK8?

The Swiss vehicle type records of the Type R (FK8) permit an 8.5J x 20 wheel with an offset of 60 and an 8J x 18 wheel with an offset of 55, the same on both axles; those of 2020 add an 8.5J x 19 wheel with an offset of 60.^{[6, 9]}

Which tyres, and which load index, does a Honda Civic Type R FK8 take?

245/30 R20 with a load index of 90, i.e. 600 kg per tyre, on the 20-inch wheel; 235/40 R18 with a load index of 90, then 95 in the 2020 records, i.e. 600 then 690 kg, on the 18-inch wheel; 245/35 R19 with a load index of 93, i.e. 650 kg, on the 19-inch wheel.^{[6, 9, 11]}

What is the load per wheel on a Honda Civic Type R FK8?

Its Swiss vehicle type records give it a permissible load of 1,000 kg on the front axle, i.e. 500 kg per front wheel, and of 800 kg on the rear axle: it is the front, with the engine and the driven wheels, that carries the most. The 245/30 R20 tyre with a load index of 90 carries 600 kg.^{[6, 9, 11]}

What PCD (bolt pattern), centre bore and nuts does a Honda Civic Type R FK8 use?

The PCD is 5x120, the centre bore 64.1 mm, and the wheels are held by M14 x 1.5 nuts: SCC, koleso.ee and the German general operating permits (Allgemeine Betriebserlaubnis) for BBS and MAK wheels, which name the 235 kW Type R, give these measurements. The Honda owner's manual sets the tightening torque of the nuts at 127 N·m on the Type R, compared with 108 N·m on the other Civics.^{[1, 2, 3, 4, 5]}

Which brakes does a Honda Civic Type R FK8 have?

According to the Honda Canada press kit (2017), four-piston aluminium Brembo front calipers, on 350 mm discs at the front and 305 mm discs at the rear: the 18-inch wheel that the Swiss records permit must clear these calipers.^{[6, 12]}

Same fixing measurements

As original equipment, these cars have the same PCD, centre bore, thread and fixing as the Honda Civic Type R (FK8): PCD 5x120, centre bore 64.1 mm, thread M14 x 1.5, fixing: wheel nuts.

Tesla Model S second series (since 2021)
Tesla Model S first series (2012–2020)
Tesla Model X second series (since 2021)
Tesla Model X first series (2015–2020)

Same fixing measurements; original diameters and offsets: see each car's page. The seat of the bolts or nuts, the width of the wheels and brake clearance are not compared here: this comparison is not an opinion on compatibility.

Sources for the measurements and answers

BBS (KW Automotive), German general operating permit for a wheel (ABE 50516, SX 8Jx18) listing the Honda Civic Type R (X) FC, FK, 235 kW, and Type R (XI) FE, 242 kW (secondary source, consulted on 20 October 2026)
koleso.ee, Honda Civic Type R FK8 [2017 .. 2022], 2.0i 235 kW: centre bore, PCD, nuts, thread, 127 Nm; fitments given by the database (secondary source, consulted on 20 October 2026)
MAK, German general operating permit for a wheel (ABE 53982, BR8090 8Jx19) listing the Honda Civic FE 242 kW and FC/FK 235 kW (Type R power outputs) (secondary source, consulted on 20 October 2026)
SCC Fahrzeugtechnik (spurverbreiterung.de), Honda Civic Type R, type FK8, 2017-2022 (secondary source, consulted on 20 October 2026)
Honda UK, owner's manual “2017 Civic TypeR Owner's Manual” (2017 petrol Civic, in which the Type R is the “2.0 L engine models”) (primary source, consulted on 20 October 2026)
Swiss Federal Roads Office (ASTRA), vehicle type record no. 1HA493 (Honda Civic Type R, variant FK801, 235 kW, June 2017): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
Swiss Federal Roads Office (ASTRA), vehicle type record no. 1HA511 (Honda Civic Type R, variant FK802, 235 kW, June 2018): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
Swiss Federal Roads Office (ASTRA), vehicle type record no. 1HA580 (Honda Civic Type R, variant FK803, 235 kW, July 2019): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
Swiss Federal Roads Office (ASTRA), vehicle type record no. 1HA602 (Honda Civic 5-door, variant FK804, 235 kW, March 2020): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
Swiss Federal Roads Office (ASTRA), vehicle type record no. 1HA611 (Honda Civic 5-door, variant FK805, 235 kW, September 2020): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 20 October 2026)
Fiches-auto.fr, tyre load index table (index → kg) (reference table, for a conversion, consulted on 3 October 2026)
Honda Canada (newsroom), 2 August 2017 (primary source, consulted on 20 October 2026)

Publication rule: a measurement is shown only if a primary source gives it (a manufacturer's document, an official vehicle type record, an original parts catalogue, the maker of the original wheel) without another primary source contradicting it, or if two independent specialist sources agree without a primary source contradicting them. The press and forums do not count. Measurements checked on 20 October 2026 by the Onyx Forged design office.

Designs for this generation

Three models from our catalogue, forged to measure for your Honda Civic Type R (FK8). The price is for a set of four wheels: it depends on the construction and the diameter.

Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Find my wheel · All 24 designs in the catalogue

See these wheels on your car

Custom forged wheels for the Honda Civic Type R (FK8)

Forged 6061-T6 aluminium
5-axis CNC machining
Designed to JWL/VIA standards
Fitment worked out for your Honda Civic Type R (FK8)

Civic Type R FK8: 5x120, a 64.1 mm hub, M14 x 1.5 nuts

The Honda Civic Type R FK8, revealed by Honda in March 2017 and produced at Swindon until the plant closed in 2021, uses 5x120 on a 64.1 mm hub, with M14 x 1.5 wheel nuts: SCC, koleso.ee and two German operating permits for wheels (BBS and MAK) that name the 235 kW Type R give these measurements, each cited in the table. The Honda owner's manual sets the tightening torque at 127 N·m on the Type R, compared with 108 N·m on the other Civics: one more reason not to confuse the two.

The permitted fitments: an offset of 60, or of 55

The vehicle type record of the Swiss Federal Roads Office (ASTRA), the document that sets the tyre and wheel combinations a car may carry, permits for the Type R the same wheel on both axles: 8.5J x 20 with an offset of 60, on a 245/30 R20 tyre, or 8J x 18 with an offset of 55, on a 235/40 R18 tyre; the 2020 records add an 8.5J x 19 wheel with an offset of 60, on a 245/35 R19 tyre. The 2017 Honda manual gives the 20-inch wheel and its tyre. These high offsets keep the wheel close to the hub, on a front-wheel-drive car where the front carries the most.

Brakes and load per wheel

Honda specifies four-piston Brembo front calipers and 350 mm front discs: an 18-inch wheel must clear them, and the Onyx Forged design office starts from your calipers. The record gives a permissible load of 1,000 kg on the front axle, i.e. 500 kg per front wheel, and of 800 kg on the rear axle.

What these measurements say about a forged wheel

The offset positions the wheel in the wheel arch: a wider wheel, or a lower offset, brings it closer to the wing. The Onyx Forged design office starts from the measurements on this page, your brakes and your tyres to calculate the width and offset of your wheels, then submits them to you. The offset calculator compares two fitments: it compares, it does not choose the measurement for you.

Roadworthiness test: what is examined

The French roadworthiness test (contrôle technique) examines the wheel without removing it (cracks, deformation, a wheel that protrudes beyond the bodywork) and verifies that the tyre size is one provided for by the manufacturer or accepted as equivalent. Keeping a tyre size from the original fitment, and at least its load index, avoids having to justify it; the details are on the roadworthiness test and registration document page.

What we record before machining

The exact version, stated on the registration document, and the current diameter of your wheels.
The braking system, on which the smallest possible diameter depends (wheels and brakes (page in French)).
The current fitment, axle by axle, and the hub's 64.1 mm centre bore.

Configure your forged wheels for the Honda Civic Type R (FK8)

The Onyx Forged design office works out the measurements of your car from its exact version, stated on the registration document, and shows them to you before machining. Each set is cut from forged 6061-T6 aluminium, machined on a 5-axis CNC centre, as monoblock, two-piece or three-piece wheels; our wheels are designed to JWL/VIA standards. Prices by diameter and the lead time are given on this page, under “What Onyx can make”. Start your configuration or write to contact@onyxforgedwheels.com.

Configure custom wheels for your Honda Civic Type R (FK8): free 3D render, on request.

Useful guides

Other Honda Civic generations

Onyx Forged designs and has wheels made for these generations too. Each one has its own PCD, offsets and sizes: make sure you are on yours.

Honda Civic Type R (FL5) forged wheels (since 2022)

See all generations of the Honda Civic, or all Honda models.