Custom forged wheels for Renault 5 E-Tech first generation (2024-present)
Technical specifications
- Production period
- 2024-present
Original fitment measurements: Renault 5 E-Tech first generation
The measurements of the car as delivered new, to identify yours and compare. Each value refers, by a number, to the sources that give it. They are not a recommendation: Onyx does not advise any specific offset.
Hub
| Measurement | Original value |
|---|---|
| PCD (bolt pattern) | 5x114.3 [1, 2, 3] |
| Centre bore | 66.1 mm [1, 2, 3] |
| Thread | M12 x 1.5 [2, 3] |
| Fixing | Wheel bolts [2, 3] |
| Bolt or nut seat | Not published |
| Tightening torque | Not published |
“Not published”: no source gives it with the certainty we require at this stage (see the rule below).
Original fitments by version
| Version and fitment | Front | Rear | ||||||
|---|---|---|---|---|---|---|---|---|
| Diameter | Width | Original offset (manufacturer) | Tyre | Diameter | Width | Original offset (manufacturer) | Tyre | |
| Renault 5 E-Tech electric, 70, 90 and 110 kW, 18 inches, original equipment | 18″ [4, 5, 6, 7, 8, 9, 10, 11] | 6.5J [4, 5, 6, 7, 8, 9, 10, 11] | ET 38 [4, 5, 6, 7, 8, 9, 10, 11] | 195/55 R18 [4, 5, 6, 7, 8, 9, 10, 11] | 18″ [4, 5, 6, 7, 8, 9, 10, 11] | 6.5J [4, 5, 6, 7, 8, 9, 10, 11] | ET 38 [4, 5, 6, 7, 8, 9, 10, 11] | 195/55 R18 [4, 5, 6, 7, 8, 9, 10, 11] |
The offsets are the original ones, given by the manufacturer or by the sources cited; they help you identify your car's fitment.
What Onyx can make for the Renault 5 E-Tech first generation
Custom forged wheels in forged 6061-T6 aluminium, designed to JWL/VIA standards, in monoblock or two-piece construction; three-piece wheels are made on quotation.
The diameters below start at the smallest original diameter recorded on this car (18″) and go up to 24″.
| Diameter | Monoblock, set of four wheels | Two-piece, set of four wheels |
|---|---|---|
| 18″ | €3,200 Great Britain: £3,336 with UK import VAT | €4,300 Great Britain: £4,482 with UK import VAT |
| 19″ | €3,200 Great Britain: £3,336 with UK import VAT | €4,300 Great Britain: £4,482 with UK import VAT |
| 20″ | €3,300 Great Britain: £3,440.40 with UK import VAT | €4,400 Great Britain: £4,586.40 with UK import VAT |
| 21″ | €3,550 Great Britain: £3,700.80 with UK import VAT | €4,750 Great Britain: £4,951.20 with UK import VAT |
| 22″ | €3,750 Great Britain: £3,908.40 with UK import VAT | €5,200 Great Britain: £5,420.40 with UK import VAT |
| 23″ | €3,950 Great Britain: £4,117.20 with UK import VAT | €5,750 Great Britain: £5,992.80 with UK import VAT |
| 24″ | €4,100 Great Britain: £4,273.20 with UK import VAT | €6,300 Great Britain: £6,566.40 with UK import VAT |
Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.
Wheels delivered in 4 to 8 working weeks, shipping included, from full payment for an order on the website, or from the deposit for an order on quotation, and at the earliest from your approval of the measurements, the colour or the 3D render you asked for, under article 5.1 of the Terms and Conditions.
The offset and width of your wheels do not come from a table: the Onyx Forged design office calculates them for your car and your brakes, and submits them to you before machining.
Frequently asked questions: wheels for the Renault 5 E-Tech first generation
What are the original offsets for the wheels of a Renault 5 E-Tech?
An offset of 38, on both axles, on the only wheel permitted by its Swiss vehicle type records: 6.5J x 18, at 70, 90 and 110 kW alike. [4, 8, 10]
Which tyres, and which load index, does a Renault 5 E-Tech take?
195/55 R18 with load index 93, i.e. 650 kg per tyre, on both axles, at every power output. [4, 10, 12]
What is the load per wheel on a Renault 5 E-Tech?
The Swiss vehicle type record of the 110 kW version gives it a permissible load of 980 kg on the front axle and 1,000 kg on the rear axle, i.e. 490 and 500 kg per wheel; that of the 70 kW version, 910 and 940 kg, i.e. 455 and 470 kg per wheel. The 195/55 R18 tyre with load index 93 carries 650 kg. [4, 10, 12]
What PCD, centre bore and bolts does a Renault 5 E-Tech use?
The PCD is 5x114.3 and the centre bore 66.1 mm, according to wheelfitment.eu, SCC and hubcentric-rings.com; the wheels are held by M12 x 1.5 bolts, according to wheelfitment.eu and SCC. The tightening torque is not published: wheelfitment.eu and hubcentric-rings.com give two different values for it, and we have not read a Renault manual that settles it. [1, 2, 3]
Same fixing measurements
As original equipment, these cars have the same PCD, centre bore, thread and fixing as the Renault 5 E-Tech first generation: PCD 5x114.3, centre bore 66.1 mm, thread M12 x 1.5, fixing: wheel bolts.
- Alpine A290 first generation (since 2024)
- Renault Clio IV R.S. (2013–2018)
- Renault Mégane IV R.S. (2017–2023)
Same fixing measurements; original diameters and offsets: see each car's page. The seat of the bolts or nuts, the width of the wheels and brake clearance are not compared here: this comparison is not an opinion on compatibility.
Sources for the measurements and answers
- hubcentric-rings.com, Renault 5 E-Tech (“P01 (2024–)” row) (secondary source, consulted on 21 October 2026)
- SCC Fahrzeugtechnik (spurverbreiterung.de), Renault 5 E-Tech, type P01 (R5), 2024 onwards (secondary source, consulted on 21 October 2026)
- wheelfitment.eu, Renault 5 E-Tech (2024 - ) (secondary source, consulted on 21 October 2026)
- Swiss Federal Roads Office (ASTRA), vehicle type record no. 1RH248 (Renault 5 E-Tech electric, type P01, 110 kW, May 2024): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
- Swiss Federal Roads Office (ASTRA), vehicle type record no. AXA730 (Renault 5 E-Tech electric, type P01, 110 kW, November 2024): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
- Swiss Federal Roads Office (ASTRA), vehicle type record no. 1RH292 (Renault 5 E-Tech electric, type P01, 110 kW, November 2025): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
- Swiss Federal Roads Office (ASTRA), vehicle type record no. AXB551 (Renault 5 E-Tech electric, type P01, 110 kW, June 2026): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
- Swiss Federal Roads Office (ASTRA), vehicle type record no. 1RH255 (Renault 5 E-Tech electric, type P01, 90 kW, November 2024): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
- Swiss Federal Roads Office (ASTRA), vehicle type record no. 1RH293 (Renault 5 E-Tech electric, type P01, 90 kW, November 2025): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
- Swiss Federal Roads Office (ASTRA), vehicle type record no. 1RH270 (Renault 5 E-Tech electric, type P01, 70 kW, May 2025): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
- Swiss Federal Roads Office (ASTRA), vehicle type record no. 1RH294 (Renault 5 E-Tech electric, type P01, 70 kW, November 2025): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
- Fiches-auto.fr, tyre load index table (index → kg) (reference table, for a conversion, consulted on 3 October 2026)
Publication rule: a measurement is shown only if a primary source gives it (a manufacturer's document, an official vehicle type record, an original parts catalogue, the maker of the original wheel) without another primary source contradicting it, or if two independent specialist sources agree without a primary source contradicting them. The press and forums do not count. Measurements checked on 21 October 2026 by the Onyx Forged design office.
Designs for this generation
Three models from our catalogue, forged to measure for your Renault 5 E-Tech first generation. The price is for a set of four wheels: it depends on the construction and the diameter.
OX-Y5 FrondeMonoblock · From €3,200 for a set of four wheelsGreat Britain: from £3,336 with UK import VAT
OX-DC5 VeloceMonoblock · From €3,200 for a set of four wheelsGreat Britain: from £3,336 with UK import VAT
OX-M2 MonacoTwo-piece · From €4,300 for a set of four wheelsGreat Britain: from £4,482 with UK import VAT
Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.
Custom forged wheels for the Renault 5 E-Tech first generation
- Forged 6061-T6 aluminium
- 5-axis CNC machining
- Designed to JWL/VIA standards
- Fitment worked out for your Renault 5 E-Tech first generation
Renault 5 E-Tech: 5x114.3, a 66.1 mm hub, M12 x 1.5 bolts
The Renault 5 E-Tech electric (type P01), whose first Swiss vehicle type record dates from May 2024, is 5x114.3 on a 66.1 mm hub, with M12 x 1.5 wheel bolts: wheelfitment.eu, SCC and hubcentric-rings.com give the PCD (bolt pattern) and the centre bore, wheelfitment.eu and SCC the bolts, each cited in the table. The tightening torque is not published: wheelfitment.eu and hubcentric-rings.com give two different values for it, and we have not read a Renault manual that settles it. These are the hub measurements of the Clio IV R.S..
A single wheel: 6.5J x 18, an offset of 38
The vehicle type record of the Swiss Federal Roads Office (ASTRA), the document that sets the tyre and wheel combinations a car may carry, permits for the 5 E-Tech a single combination, the same on both axles and for all three power outputs, 70, 90 and 110 kW: a 6.5J x 18 wheel with an offset of 38, with 195/55 R18 tyres. It is a narrow wheel for its diameter: a wider wheel or a lower offset brings it closer to the wing, and the room for the tyre under the body is checked before changing wheels.
An electric front-wheel-drive car: the load per wheel
The record for the 110 kW version gives a permissible load of 980 kg on the front axle and 1,000 kg on the rear axle, i.e. 490 and 500 kg per wheel; that of the 70 kW version, 910 and 940 kg, i.e. 455 and 470 kg per wheel. This is the load the wheel must withstand, and the tyre must keep at least the load index of the original fitment, 93 for the 195/55 R18 (reading a tyre (page in French)); on an electric car, weight and torque also wear the tyres faster (electric car tyres (page in French)).
What these measurements say about a forged wheel
The offset positions the wheel in the wheel arch: a wider wheel, or a lower offset, brings it closer to the wing. The Onyx Forged design office starts from the measurements on this page, your brakes and your tyres to calculate the width and offset of your wheels, then submits them to you. The offset calculator compares two fitments: it compares, it does not choose the measurement for you.
Roadworthiness test: what is examined
The French roadworthiness test (contrôle technique) examines the wheel without removing it (cracks, deformation, a wheel that protrudes beyond the bodywork) and verifies that the tyre size is one provided for by the manufacturer or accepted as equivalent. Keeping a tyre size from the original fitment, and at least its load index, avoids having to justify it; the details are on the roadworthiness test and registration page.
What we record before machining
- The exact version, stated on the registration document, and the current diameter of your wheels.
- The braking system, on which the smallest possible diameter depends (wheels and brakes (page in French)).
- The current fitment, axle by axle, and the 66.1 mm hub bore.
Configure your forged wheels for the Renault 5 E-Tech
The Onyx Forged design office works out the measurements of your car from its exact version, stated on the registration document, and shows them to you before machining. Each set is cut from forged 6061-T6 aluminium, machined on a 5-axis CNC centre, as monoblock, two-piece or three-piece wheels; our wheels are designed to JWL/VIA standards. Prices by diameter and the lead time are given on this page, under “What Onyx can make”. Start your configuration or write to contact@onyxforgedwheels.com.
Configure custom wheels for your Renault 5 E-Tech first generation: free 3D render, on request.
Useful guides
See all Renault models.