Custom forged wheels for Renault Clio IV R.S. (2013-2018)

Technical specifications

Production period: 2013-2018

Original fitment measurements: Renault Clio IV R.S.

The measurements of the car as delivered new, to identify yours and compare. Each value refers, by a number, to the sources that give it. They are not a recommendation: Onyx does not advise any specific offset.

Hub

Measurement	Original value
PCD (bolt pattern)	5x114.3^{[1, 2, 3, 4]}
Centre bore	66.1 mm^{[1, 2, 3, 4]}
Thread	M12 x 1.5^{[1, 2, 3, 4]}
Fixing	Wheel bolts^{[1, 2, 3, 4]}
Bolt or nut seat	Not published
Tightening torque	105 Nm^{[1, 2, 3, 4]}

“Not published”: no source gives it with the certainty we require at this stage (see the rule below).

Original fitments by version

Version and fitment	Front				Rear
Version and fitment	Diameter	Width	Original offset (manufacturer)	Tyre	Diameter	Width	Original offset (manufacturer)	Tyre
Clio R.S. 200 EDC, 147 kW, 17 inches, original equipment	17″^{[5, 6, 7]}	7.5J^{[5, 6, 7]}	ET 55^{[5, 6, 7]}	205/45 R17^{[5, 6, 7]}	17″^{[5, 6, 7]}	7.5J^{[5, 6, 7]}	ET 55^{[5, 6, 7]}	205/45 R17^{[5, 6, 7]}
Clio R.S. 200 EDC, 147 kW, 18 inches, original equipment	18″^{[5, 6, 7]}	7.5J^{[5, 6, 7]}	ET 55^{[5, 6, 7]}	205/40 R18^{[5, 6, 7]}	18″^{[5, 6, 7]}	7.5J^{[5, 6, 7]}	ET 55^{[5, 6, 7]}	205/40 R18^{[5, 6, 7]}
Clio R.S. 200 EDC, 147 kW, 17 inches, 6.5J wheel, original equipment	17″^[5]	6.5J^[5]	ET 47^[5]	185/50 R17^[5]	17″^[5]	6.5J^[5]	ET 47^[5]	185/50 R17^[5]
Clio R.S. 220 EDC Trophy, 162 kW, 18 inches, original equipment	18″^{[8, 9]}	7.5J^{[8, 9]}	ET 55^{[8, 9]}	205/40 R18^{[8, 9]}	18″^{[8, 9]}	7.5J^{[8, 9]}	ET 55^{[8, 9]}	205/40 R18^{[8, 9]}
Clio R.S. 220 EDC Trophy, 162 kW, 17 inches, original equipment	17″^{[8, 9]}	7.5J^{[8, 9]}	ET 55^{[8, 9]}	205/45 R17^{[8, 9]}	17″^{[8, 9]}	7.5J^{[8, 9]}	ET 55^{[8, 9]}	205/45 R17^{[8, 9]}

The offsets are the original ones, given by the manufacturer or by the sources cited; they help you identify your car's fitment.

What Onyx can make for the Renault Clio IV R.S.

Custom forged wheels in forged 6061-T6 aluminium, designed to JWL/VIA standards, in monoblock or two-piece construction; three-piece wheels are made on quotation.

The diameters below start at the smallest original diameter recorded on this car (17″) and go up to 24″.

Diameter	Monoblock, set of four wheels	Two-piece, set of four wheels
18″	€3,200 Great Britain: £3,336 with UK import VAT	€4,300 Great Britain: £4,482 with UK import VAT
19″	€3,200 Great Britain: £3,336 with UK import VAT	€4,300 Great Britain: £4,482 with UK import VAT
20″	€3,300 Great Britain: £3,440.40 with UK import VAT	€4,400 Great Britain: £4,586.40 with UK import VAT
21″	€3,550 Great Britain: £3,700.80 with UK import VAT	€4,750 Great Britain: £4,951.20 with UK import VAT
22″	€3,750 Great Britain: £3,908.40 with UK import VAT	€5,200 Great Britain: £5,420.40 with UK import VAT
23″	€3,950 Great Britain: £4,117.20 with UK import VAT	€5,750 Great Britain: £5,992.80 with UK import VAT
24″	€4,100 Great Britain: £4,273.20 with UK import VAT	€6,300 Great Britain: £6,566.40 with UK import VAT

Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Wheels delivered in 4 to 8 working weeks, shipping included, from full payment for an order on the website, or from the deposit for an order on quotation, and at the earliest from your approval of the measurements, the colour or the 3D render you asked for, under article 5.1 of the Terms and Conditions.

The offset and width of your wheels do not come from a table: the Onyx Forged design office calculates them for your car and your brakes, and submits them to you before machining.

Configure wheels for the Renault Clio IV R.S.

Frequently asked questions: wheels for the Renault Clio IV R.S.

What are the original offsets for the wheels of a Renault Clio IV R.S.?

An offset of 55, on both axles, on the 7.5J x 17 and 7.5J x 18 wheels permitted by its Swiss vehicle type records, on both the R.S. 200 EDC and the R.S. 220 EDC Trophy. The December 2012 record also permitted a 6.5J x 17 wheel with an offset of 47.^{[5, 6, 8]}

Which tyres, and which load index, does a Renault Clio IV R.S. take?

205/45 R17 with load index 88, i.e. 560 kg per tyre, or 205/40 R18 with load index 86, i.e. 530 kg, on both axles.^{[6, 8, 10]}

What is the load per wheel on a Renault Clio IV R.S.?

Its Swiss vehicle type records give it a permissible load of 960 kg on the front axle and 800 kg on the rear axle, i.e. 480 and 400 kg per wheel: on this front-wheel-drive car, the front carries the most. The 205/40 R18 tyre with load index 86 carries 530 kg.^{[6, 8, 10]}

What PCD, centre bore and bolts does a Renault Clio IV R.S. use?

The PCD is 5x114.3, the centre bore 66.1 mm, and the wheels are held by M12 x 1.5 bolts tightened to 105 Nm: wheelfitment.eu, koleso.ee and SCC give these measurements for the R.S. The other Clio IV models are 4x100 on a 60.1 mm hub, according to koleso.ee and SCC: an ordinary Clio wheel does not fit an R.S.^{[1, 2, 3, 4, 11]}

Same fixing measurements

As original equipment, these cars have the same PCD, centre bore, thread and fixing as the Renault Clio IV R.S.: PCD 5x114.3, centre bore 66.1 mm, thread M12 x 1.5, fixing: wheel bolts.

Alpine A290 first generation (since 2024)
Renault 5 E-Tech first generation (since 2024)
Renault Mégane IV R.S. (2017–2023)

Same fixing measurements; original diameters and offsets: see each car's page. The seat of the bolts or nuts, the width of the wheels and brake clearance are not compared here: this comparison is not an opinion on compatibility.

Sources for the measurements and answers

koleso.ee, Renault Clio IV (BH/KH) [2016 .. 2020], RS (147 kW) and RS Trophy (162 kW) trims (secondary source, consulted on 21 October 2026)
koleso.ee, Renault Clio IV (BH/KH) [2012 .. 2016], RS (147 kW) and RS Trophy (162 kW) trims (secondary source, consulted on 21 October 2026)
SCC Fahrzeugtechnik (spurverbreiterung.de), Renault Clio RS, type X98*, 2013 onwards (secondary source, consulted on 21 October 2026)
wheelfitment.eu, Renault Clio Sport (2013 - 2023) (secondary source, consulted on 21 October 2026)
Swiss Federal Roads Office (ASTRA), vehicle type record no. 1RB815 (Renault Clio R.S. 200 EDC, type R, 147 kW, December 2012): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
Swiss Federal Roads Office (ASTRA), vehicle type record no. 1RC283 (Renault Clio R.S. 200 EDC, type R, 147 kW, June 2015): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
Swiss Federal Roads Office (ASTRA), vehicle type record no. 1RC434 (Renault Clio R.S. 200 EDC, type R, 147 kW, August 2016): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
Swiss Federal Roads Office (ASTRA), vehicle type record no. 1RC282 (Renault Clio R.S. 220 EDC, type R, 162 kW, June 2015): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
Swiss Federal Roads Office (ASTRA), vehicle type record no. 1RC431 (Renault Clio R.S. 220 EDC, type R, 162 kW, August 2016): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
Fiches-auto.fr, tyre load index table (index → kg) (reference table, for a conversion, consulted on 3 October 2026)
SCC Fahrzeugtechnik (spurverbreiterung.de), Renault Clio IV, type X98, 2013-2020 (standard Clio models) (secondary source, consulted on 21 October 2026)

Publication rule: a measurement is shown only if a primary source gives it (a manufacturer's document, an official vehicle type record, an original parts catalogue, the maker of the original wheel) without another primary source contradicting it, or if two independent specialist sources agree without a primary source contradicting them. The press and forums do not count. Measurements checked on 21 October 2026 by the Onyx Forged design office.

Designs for this generation

Three models from our catalogue, forged to measure for your Renault Clio IV R.S.. The price is for a set of four wheels: it depends on the construction and the diameter.

Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Find my wheel · All 24 designs in the catalogue

See these wheels on your car

Custom forged wheels for the Renault Clio IV R.S.

Forged 6061-T6 aluminium
5-axis CNC machining
Designed to JWL/VIA standards
Fitment worked out for your Renault Clio IV R.S.

Clio IV R.S.: 5x114.3, a 66.1 mm hub, M12 x 1.5 bolts

The Renault Clio IV R.S., in its 147 kW 200 EDC and 162 kW 220 EDC Trophy versions, whose first Swiss vehicle type record dates from December 2012, is 5x114.3 on a 66.1 mm hub, with M12 x 1.5 wheel bolts tightened to 105 Nm: wheelfitment.eu, koleso.ee and SCC give these measurements, each cited in the table. This hub is not that of the other Clio IV models: an ordinary Clio wheel does not fit an R.S., nor the other way round.

17 or 18 inches, an offset of 55

The vehicle type record of the Swiss Federal Roads Office (ASTRA), the document that sets the tyre and wheel combinations a car may carry, permits for the Clio R.S. the same wheel on both axles, with an offset of 55: 7.5J x 17 with 205/45 R17 tyres, or 7.5J x 18 with 205/40 R18 tyres, on both the 200 EDC and the 220 EDC Trophy. The December 2012 record also permitted a 6.5J x 17 wheel with an offset of 47, with 185/50 R17 tyres; those of 2015 and 2016 do not include it.

A front-wheel-drive car: the front carries the most

The record gives a permissible load of 960 kg on the front axle and 800 kg on the rear axle, i.e. 480 and 400 kg per wheel. This is the load the front wheel must withstand, and the tyre must keep at least the load index of the original fitment (reading a tyre (page in French)).

What these measurements say about a forged wheel

The offset positions the wheel in the wheel arch: a wider wheel, or a lower offset, brings it closer to the wing. The Onyx Forged design office starts from the measurements on this page, your brakes and your tyres to calculate the width and offset of your wheels, then submits them to you. The offset calculator compares two fitments: it compares, it does not choose the measurement for you.

Roadworthiness test: what is examined

The French roadworthiness test (contrôle technique) examines the wheel without removing it (cracks, deformation, a wheel that protrudes beyond the bodywork) and verifies that the tyre size is one provided for by the manufacturer or accepted as equivalent. Keeping a tyre size from the original fitment, and at least its load index, avoids having to justify it; the details are on the roadworthiness test and registration page.

What we record before machining

The exact version, stated on the registration document, and the current diameter of your wheels.
The braking system, on which the smallest possible diameter depends (wheels and brakes (page in French)).
The current fitment, axle by axle, and the 66.1 mm hub bore.

Configure your forged wheels for the Renault Clio IV R.S.

The Onyx Forged design office works out the measurements of your car from its exact version, stated on the registration document, and shows them to you before machining. Each set is cut from forged 6061-T6 aluminium, machined on a 5-axis CNC centre, as monoblock, two-piece or three-piece wheels; our wheels are designed to JWL/VIA standards. Prices by diameter and the lead time are given on this page, under “What Onyx can make”. Start your configuration or write to contact@onyxforgedwheels.com.

Configure custom wheels for your Renault Clio IV R.S.: free 3D render, on request.

Useful guides

See all generations of the Renault Clio, or all Renault models.