Custom forged wheels for Tesla Model Y Juniper (2025-present)
Technical specifications
- Production period
- 2025-present
Original fitment measurements: Tesla Model Y Juniper
The measurements of the car as delivered new, to identify yours and compare. Each value refers, by a number, to the sources that give it. They are not a recommendation: Onyx does not advise any specific offset.
Hub
| Measurement | Original value |
|---|---|
| PCD (bolt pattern) | 5x114.3 [1, 2, 3, 4, 5] |
| Centre bore | 64.1 mm [2, 4, 5] |
| Thread | M14 x 1.5 [1, 3, 4, 5] |
| Fixing | Wheel nuts [1, 5, 6, 7] |
| Bolt or nut seat | 60° conical [1, 3] |
| Tightening torque | 175 Nm [1, 5, 6, 7] |
“Not published”: no source gives it with the certainty we require at this stage (see the rule below).
Original fitments by version
| Version and fitment | Front | Rear | ||||||
|---|---|---|---|---|---|---|---|---|
| Diameter | Width | Original offset (manufacturer) | Tyre | Diameter | Width | Original offset (manufacturer) | Tyre | |
| Fitments listed by Tesla (allocation by trim not published), 19 inches, original equipment | 19″ [6, 7, 8] | 9.5J [6, 7, 8] | ET 45 [6, 7, 8] | 255/45 R19 [6, 8, 9] | 19″ [6, 7, 8] | 9.5J [6, 7, 8] | ET 45 [6, 7, 8] | 255/45 R19 [6, 8, 9] |
| Fitments listed by Tesla (allocation by trim not published), 20 inches, original equipment | 20″ [6, 7, 8] | 9.5J [6, 7, 8] | ET 45 [6, 7, 8] | 255/40 R20 [6, 8, 9] | 20″ [6, 7, 8] | 9.5J [6, 7, 8] | ET 45 [6, 7, 8] | 255/40 R20 [6, 8, 9] |
| Fitments listed by Tesla (allocation by trim not published), 21 inches, staggered fitments, original equipment | 21″ [7, 8] | 9.5J [7, 8] | ET 40 [7, 8] | 255/35 R21 [8, 9] | 21″ [7, 8] | 10.5J [7, 8] | ET 48 [7] | — |
| Model Y Standard (steel wheel), 18 inches, steel wheel, original equipment | 18″ [7] | 8.5J [7] | ET 38 [7] | 235/55 R18 [9] | 18″ [7] | 8.5J [7] | ET 38 [7] | 235/55 R18 [9] |
“—”: measurement not published for lack of a sufficient source. The offsets are the original ones, given by the manufacturer or by the sources cited; they help you identify your car's fitment.
What Onyx can make for the Tesla Model Y Juniper
Custom forged wheels in forged 6061-T6 aluminium, designed to JWL/VIA standards, in monoblock or two-piece construction; three-piece wheels are made on quotation.
The diameters below start at the smallest original diameter recorded on this car (18″) and go up to 24″.
| Diameter | Monoblock, set of four wheels | Two-piece, set of four wheels |
|---|---|---|
| 18″ | €3,200 Great Britain: £3,336 with UK import VAT | €4,300 Great Britain: £4,482 with UK import VAT |
| 19″ | €3,200 Great Britain: £3,336 with UK import VAT | €4,300 Great Britain: £4,482 with UK import VAT |
| 20″ | €3,300 Great Britain: £3,440.40 with UK import VAT | €4,400 Great Britain: £4,586.40 with UK import VAT |
| 21″ | €3,550 Great Britain: £3,700.80 with UK import VAT | €4,750 Great Britain: £4,951.20 with UK import VAT |
| 22″ | €3,750 Great Britain: £3,908.40 with UK import VAT | €5,200 Great Britain: £5,420.40 with UK import VAT |
| 23″ | €3,950 Great Britain: £4,117.20 with UK import VAT | €5,750 Great Britain: £5,992.80 with UK import VAT |
| 24″ | €4,100 Great Britain: £4,273.20 with UK import VAT | €6,300 Great Britain: £6,566.40 with UK import VAT |
Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.
Wheels delivered in 4 to 8 working weeks, shipping included, from full payment for an order on the website, or from the deposit for an order on quotation, and at the earliest from your approval of the measurements, the colour or the 3D render you asked for, under article 5.1 of the Terms and Conditions.
The offset and width of your wheels do not come from a table: the Onyx Forged design office calculates them for your car and your brakes, and submits them to you before machining.
Frequently asked questions: wheels for the Tesla Model Y Juniper
What is the wheel tightening torque on a facelifted Tesla Model Y (Juniper)?
175 Nm (129 lb·ft), according to Tesla's workshop manual and owner's manual. [6, 7]
Does the steel wheel fit every facelifted Model Y (Juniper)?
No. Tesla reserves it for the Model Y Standard and warns that it can damage the suspension of a Model Y Premium or Performance. [7]
Does the Model Y Standard have pressure sensors in its wheels?
No. Tesla fits it with indirect monitoring (iTPMS) and publishes a procedure for fitting sensors in the wheels. [10]
What is the load index of the original tyres on the facelifted Model Y?
For the five-seat Model Y, at least 104 XL in 19 inches (255/45 R19), i.e. 900 kg per tyre, and 101 XL in 20 inches (255/40 R20), i.e. 825 kg. The six-seat version, on a staggered fitment, requires more at the rear: 108 XL in 19 inches and 106 XL in 20 inches. [6, 8, 11]
Same fixing measurements
As original equipment, these cars have the same PCD, centre bore, thread and fixing as the Tesla Model Y Juniper: PCD 5x114.3, centre bore 64.1 mm, thread M14 x 1.5, fixing: wheel nuts.
- Tesla Model 3 Highland (since 2024)
- Tesla Model 3 first generation (2017–2023)
Same fixing measurements; original diameters and offsets: see each car's page. The seat of the bolts or nuts, the width of the wheels and brake clearance are not compared here: this comparison is not an opinion on compatibility.
Sources for the measurements and answers
- Borbet Vertriebs GmbH, report for supplement 2 to ABE no. 54513 (§22 StVZO), wheel Y 95945, no. RA-001272-C0-021 (Essen, 18.06.2026) (secondary source, consulted on 10 October 2026)
- hubcentric-rings.com (Frontside Oy, maker of spigot rings), Tesla Model Y: PCD, centre bore, ET and torque by generation (secondary source, consulted on 10 October 2026)
- O.Z. S.p.A., ECE R124 test report no. 55809121 (5th edition, Lambsheim, 14 April 2026), “dimensionsgleich” replacement wheel 9.5Jx19 H2 type 19367: scope of use Tesla Model Y, including “Model Y (Opal/Juniper)” (secondary source, consulted on 10 October 2026)
- Unplugged Performance (tuner and wheel maker for Tesla cars), Tesla Model Y Wheel & Tire Guide (secondary source, consulted on 10 October 2026)
- wheelfitment.eu, Tesla Model Y (2020 - ) (secondary source, consulted on 3 October 2026)
- Tesla, Model Y owner's manual (China edition, in English), “Wheels and Tires” (primary source, consulted on 3 October 2026)
- Tesla, Model Y 2025+ workshop manual, “Wheels” (primary source, consulted on 3 October 2026)
- wheel-size.com, Tesla Model Y 2026 (secondary source, consulted on 3 October 2026)
- Tesla, Model Y 2025+ workshop manual, “Replacement Tire Information” (primary source, consulted on 3 October 2026)
- Tesla, Model Y 2025+ workshop manual, “iTPMS to TPMS (Model Y Standard) (Retrofit)” (primary source, consulted on 3 October 2026)
- Fiches-auto.fr, tyre load index table (index → kg) (reference table, for a conversion, consulted on 3 October 2026)
Publication rule: a measurement is shown only if a primary source gives it (a manufacturer's document, an official vehicle type record, an original parts catalogue, the maker of the original wheel) without another primary source contradicting it, or if two independent specialist sources agree without a primary source contradicting them. The press and forums do not count. Measurements checked on 10 October 2026 by the Onyx Forged design office.
Designs for this generation
Three models from our catalogue, forged to measure for your Tesla Model Y Juniper. The price is for a set of four wheels: it depends on the construction and the diameter.
OX-C9 RazorMonoblock · From €3,200 for a set of four wheelsGreat Britain: from £3,336 with UK import VAT
OX-GT15 TurbineMonoblock · From €3,200 for a set of four wheelsGreat Britain: from £3,336 with UK import VAT
OX-D15 HeritageTwo-piece · From €4,300 for a set of four wheelsGreat Britain: from £4,482 with UK import VAT
Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.
Custom forged wheels for the Tesla Model Y Juniper
- Forged 6061-T6 aluminium
- 5-axis CNC machining
- Designed to JWL/VIA standards
- Fitment worked out for your Tesla Model Y Juniper
Model Y Juniper: new body, same hub
The facelifted Model Y, known as the Juniper (model years 2025 onwards in Tesla's manuals), keeps the fixing measurements of the first generation: 5x114.3 PCD (bolt pattern), 64.1 mm centre bore, M14 x 1.5 wheel nuts with a 60° conical seat, according to specialist sources that agree, cited in the table. The torque, 175 Nm (129 lb·ft), is the one in Tesla's workshop manual and owner's manual.
The original fitments, and the Standard's steel wheel
In 19 inches, 9.5J ET 45 and 255/45 R19; in 20 inches, 9.5J ET 45 and 255/40 R20; in 21 inches, a staggered fitment, 9.5J ET 40 at the front and 10.5J ET 48 at the rear. The Model Y Standard gets an 18-inch steel wheel, 8.5J ET 38 in 235/55 R18: Tesla reserves it for this version and warns that it can damage the suspension of a Model Y Premium or Performance. The Standard has no pressure sensors in its wheels (indirect monitoring), and Tesla publishes a procedure for fitting some.
The load index, before machining
For the five-seat Model Y, Tesla requires tyres with a load index of at least 104 XL in 19 inches, i.e. 900 kg per tyre, and 101 XL in 20 inches, i.e. 825 kg; the six-seat version, on a staggered fitment, requires more at the rear. These are minimum tyre capacities, not a measurement of the wheel: we establish the load per wheel of your car before machining, not after.
Range and weight: sourced figures, or none
On an electric car, wheel size has a cost in range. Official US figures give the order of magnitude on another car from the brand: on the EPA cycle, the 2025 Model S Plaid loses 10.3% of its range between its 19-inch and 21-inch wheels (fueleconomy.gov, comparison of the 2025 Model S Plaid and Model X Plaid), a difference that combines diameter, tyre, weight and aerodynamics. We have not yet recorded a sourced figure specific to the Model Y Juniper, so we do not give one. Nor do we state a wheel weight: a forged wheel's weight depends on its spokes, its width and its construction, and we only publish what has been weighed.
Configure your forged wheels for the Model Y Juniper
The Onyx Forged design office works out the measurements of your car from its exact version, stated on the registration document, and shows them to you before machining. Each set is cut from forged 6061-T6 aluminium, machined on a 5-axis CNC centre, as monoblock, two-piece or three-piece wheels; our wheels are designed to JWL/VIA standards. Prices by diameter and the lead time are given on this page, under “What Onyx can make”. Start your configuration or write to contact@onyxforgedwheels.com.
Configure custom wheels for your Tesla Model Y Juniper: free 3D render, on request.
Useful guides
Other Tesla Model Y generations
Onyx Forged designs and has wheels made for these generations too. Each one has its own PCD, offsets and sizes: make sure you are on yours.
- Tesla Model Y first generation forged wheels (2020–2024)
See all generations of the Tesla Model Y, or all Tesla models.