Onyx Forged
FREN

Custom forged wheels for Škoda Octavia RS (Mk4) (2020-present)

Technical specifications

Production period
2020-present

Original fitment measurements: Škoda Octavia RS (Mk4)

The measurements of the car as delivered new, to identify yours and compare. Each value refers, by a number, to the sources that give it. They are not a recommendation: Onyx does not advise any specific offset.

Hub

MeasurementOriginal value
PCD (bolt pattern)5x112 [1, 2, 3, 4]
Centre bore57.1 mm [1, 2, 3, 4]
ThreadM14 x 1.5 [2, 3, 4]
FixingWheel bolts [2, 3, 4]
Bolt or nut seatNot published
Tightening torqueNot published

“Not published”: no source gives it with the certainty we require at this stage (see the rule below).

Original fitments by version

Version and fitmentFrontRear
DiameterWidthOriginal offset (manufacturer)TyreDiameterWidthOriginal offset (manufacturer)Tyre
Octavia RS Combi: 180 kW 2.0 TSI, 147 kW 2.0 TDI 4x4 and RS iV plug-in hybrid, 18 inches, original equipment18″ [5, 6, 7, 8, 9, 10, 11, 12]7.5J [5, 6, 7, 8, 9, 10, 11, 12]ET 48 [5, 6, 7, 8, 9, 10, 11, 12]225/45 R18 [5, 6, 7, 8, 9, 10, 11, 12]18″ [5, 6, 7, 8, 9, 10, 11, 12]7.5J [5, 6, 7, 8, 9, 10, 11, 12]ET 48 [5, 6, 7, 8, 9, 10, 11, 12]225/45 R18 [5, 6, 7, 8, 9, 10, 11, 12]
Octavia RS Combi: 180 kW 2.0 TSI, 147 kW 2.0 TDI 4x4 and RS iV plug-in hybrid, 19 inches, original equipment19″ [5, 6, 7, 8, 9, 10, 11, 12]7.5J [5, 6, 7, 8, 9, 10, 11, 12]ET 48 [5, 6, 7, 8, 9, 10, 11, 12]225/40 R19 [5, 6, 7, 8, 9, 10, 11, 12]19″ [5, 6, 7, 8, 9, 10, 11, 12]7.5J [5, 6, 7, 8, 9, 10, 11, 12]ET 48 [5, 6, 7, 8, 9, 10, 11, 12]225/40 R19 [5, 6, 7, 8, 9, 10, 11, 12]
Octavia RS Combi: 180 kW 2.0 TSI, 147 kW 2.0 TDI 4x4 and RS iV plug-in hybrid, 17 inches, winter tyres, original equipment (winter tyres)17″ [5, 6, 7, 8, 9, 10, 11, 12]6.5J [5, 6, 7, 8, 9, 10, 11, 12]ET 46 [5, 6, 7, 8, 9, 10, 11, 12]205/55 R17 [5, 6, 7, 8, 9, 10, 11, 12]17″ [5, 6, 7, 8, 9, 10, 11, 12]6.5J [5, 6, 7, 8, 9, 10, 11, 12]ET 46 [5, 6, 7, 8, 9, 10, 11, 12]205/55 R17 [5, 6, 7, 8, 9, 10, 11, 12]

The offsets are the original ones, given by the manufacturer or by the sources cited; they help you identify your car's fitment.

What Onyx can make for the Škoda Octavia RS (Mk4)

Custom forged wheels in forged 6061-T6 aluminium, designed to JWL/VIA standards, in monoblock or two-piece construction; three-piece wheels are made on quotation.

The diameters below start at the smallest original diameter recorded on this car (17″) and go up to 24″.

DiameterMonoblock, set of four wheelsTwo-piece, set of four wheels
18″€3,200
Great Britain: £3,336 with UK import VAT		€4,300
Great Britain: £4,482 with UK import VAT
19″€3,200
Great Britain: £3,336 with UK import VAT		€4,300
Great Britain: £4,482 with UK import VAT
20″€3,300
Great Britain: £3,440.40 with UK import VAT		€4,400
Great Britain: £4,586.40 with UK import VAT
21″€3,550
Great Britain: £3,700.80 with UK import VAT		€4,750
Great Britain: £4,951.20 with UK import VAT
22″€3,750
Great Britain: £3,908.40 with UK import VAT		€5,200
Great Britain: £5,420.40 with UK import VAT
23″€3,950
Great Britain: £4,117.20 with UK import VAT		€5,750
Great Britain: £5,992.80 with UK import VAT
24″€4,100
Great Britain: £4,273.20 with UK import VAT		€6,300
Great Britain: £6,566.40 with UK import VAT

Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Wheels delivered in 4 to 8 working weeks, shipping included, from full payment for an order on the website, or from the deposit for an order on quotation, and at the earliest from your approval of the measurements, the colour or the 3D render you asked for, under article 5.1 of the Terms and Conditions.

The offset and width of your wheels do not come from a table: the Onyx Forged design office calculates them for your car and your brakes, and submits them to you before machining.

Configure wheels for the Škoda Octavia RS (Mk4)

Frequently asked questions: wheels for the Škoda Octavia RS (Mk4)

What are the original offsets for the wheels of a Škoda Octavia RS Mk4?

An offset of 48, on both axles, on the 7.5J x 18 and 7.5J x 19 wheels its Swiss vehicle type records permit, for the 2.0 TSI, the 2.0 TDI 4x4 and the RS iV alike; for winter, 6.5J x 17 with an offset of 46. [5, 7, 8, 11]

Which tyres, and which load index, does a Škoda Octavia RS Mk4 take?

225/45 R18 with load index 91, i.e. 615 kg per tyre, or 225/40 R19 with load index 93, i.e. 650 kg, on both axles; for winter, 205/55 R17 with load index 91. [5, 10, 13]

What is the load per wheel on a Škoda Octavia RS Mk4?

The Swiss vehicle type record of the 2020 2.0 TSI gives it a permissible load of 1,060 kg on the front axle and 1,000 kg on the rear axle, i.e. 530 and 500 kg per wheel: on this front-wheel-drive car, the front carries the most; that of the 2.0 TDI 4x4, 1,090 and 1,080 kg, i.e. 545 and 540 kg per wheel. The 225/40 R19 tyre with load index 93 carries 650 kg. [5, 8, 13]

What PCD, centre bore and bolts does a Škoda Octavia RS Mk4 use?

The PCD is 5x112, the centre bore 57.1 mm, and the wheels are held by M14 x 1.5 bolts: wheelfitment.eu, koleso.ee and SCC give these measurements, and hubcentric-rings.com the PCD and the centre bore. The tightening torque is not published: wheelfitment.eu and koleso.ee do not give the same value. [1, 2, 3, 4]

Same fixing measurements

As original equipment, these cars have the same PCD, centre bore, thread and fixing as the Škoda Octavia RS (Mk4): PCD 5x112, centre bore 57.1 mm, thread M14 x 1.5, fixing: wheel bolts.

Same fixing measurements; original diameters and offsets: see each car's page. The seat of the bolts or nuts, the width of the wheels and brake clearance are not compared here: this comparison is not an opinion on compatibility.

Sources for the measurements and answers

  1. hubcentric-rings.com, Skoda Octavia (“NX (2020–)” row) (secondary source, consulted on 21 October 2026)
  2. koleso.ee, Skoda Octavia Mk4 (A8, NX) [2020 .. 2024], 147 and 180 kW RS and iV RS (secondary source, consulted on 21 October 2026)
  3. SCC Fahrzeugtechnik (spurverbreiterung.de), Skoda Octavia IV (inkl. RS), type NX, 2020 onwards (secondary source, consulted on 21 October 2026)
  4. wheelfitment.eu, Skoda Octavia (2020 - ) (secondary source, consulted on 21 October 2026)
  5. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1SL282 (Škoda Octavia RS 2.0 TSI Combi, type NX, 180 kW, September 2020): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  6. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1SL624 (Škoda Octavia RS 2.0 TSI Combi, type NX, 180 kW, January 2022): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  7. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1XZ478 (Škoda Octavia RS 2.0 TSI Combi, type NX, 180 kW, March 2023): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  8. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1SL349: permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  9. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1SL637: permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  10. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1XZ919: permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  11. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1SL274 (Škoda Octavia RS iV Combi (plug-in hybrid), type NX, September 2020): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  12. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1XX811 (Škoda Octavia RS iV Combi (plug-in hybrid), type NX, March 2022): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 21 October 2026)
  13. Fiches-auto.fr, tyre load index table (index → kg) (reference table, for a conversion, consulted on 3 October 2026)

Publication rule: a measurement is shown only if a primary source gives it (a manufacturer's document, an official vehicle type record, an original parts catalogue, the maker of the original wheel) without another primary source contradicting it, or if two independent specialist sources agree without a primary source contradicting them. The press and forums do not count. Measurements checked on 21 October 2026 by the Onyx Forged design office.

Designs for this generation

Three models from our catalogue, forged to measure for your Škoda Octavia RS (Mk4). The price is for a set of four wheels: it depends on the construction and the diameter.

Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Find my wheel · All 24 designs in the catalogue

See these wheels on your car

Custom forged wheels for the Škoda Octavia RS (Mk4)

  • Forged 6061-T6 aluminium
  • 5-axis CNC machining
  • Designed to JWL/VIA standards
  • Fitment worked out for your Škoda Octavia RS (Mk4)

Octavia RS Mk4: 5x112, a 57.1 mm hub, M14 x 1.5 bolts

The fourth-generation Škoda Octavia RS (type NX), whose first Swiss vehicle type records date from September 2020, is 5x112 on a 57.1 mm hub, with M14 x 1.5 wheel bolts: wheelfitment.eu, koleso.ee and SCC give these measurements, and hubcentric-rings.com the PCD (bolt pattern) and the centre bore, each cited in the table. The tightening torque is not published: wheelfitment.eu and koleso.ee give two different values for it, and we have not read a Škoda manual that settles it.

18 or 19 inches, an offset of 48

The vehicle type record of the Swiss Federal Roads Office (ASTRA), the document that sets the tyre and wheel combinations a car may carry, permits the same wheel on both axles for the Octavia RS Combi, whether the 180 kW 2.0 TSI, the 147 kW four-wheel-drive 2.0 TDI or the RS iV plug-in hybrid, with an offset of 48: 7.5J x 18 with 225/45 R18 tyres, or 7.5J x 19 with 225/40 R19 tyres. For winter, it permits 6.5J x 17 with an offset of 46, with 205/55 R17 tyres. The Swiss records we have read only cover the Combi: the saloon does not appear in them, and this page says nothing about it.

A front-wheel-drive car: the front carries the most

The record for the 2020 2.0 TSI gives a permissible load of 1,060 kg on the front axle and 1,000 kg on the rear axle, i.e. 530 and 500 kg per wheel; that of the four-wheel-drive 2.0 TDI, 1,090 and 1,080 kg, i.e. 545 and 540 kg per wheel. This is the load the front wheel must withstand, and the tyre must keep at least the load index of the original fitment, 93 on 225/40 R19 (reading a tyre (page in French)).

What these measurements say about a forged wheel

The offset positions the wheel in the wheel arch: a wider wheel, or a lower offset, brings it closer to the wing. The Onyx Forged design office starts from the measurements on this page, your brakes and your tyres to calculate the width and offset of your wheels, then submits them to you. The offset calculator compares two fitments: it compares, it does not choose the measurement for you.

Roadworthiness test: what is examined

The French roadworthiness test (contrôle technique) examines the wheel without removing it (cracks, deformation, a wheel that protrudes beyond the bodywork) and verifies that the tyre size is one provided for by the manufacturer or accepted as equivalent. Keeping a tyre size from the original fitment, and at least its load index, avoids having to justify it; the details are on the roadworthiness test and registration page.

What we record before machining

Configure your forged wheels for the Škoda Octavia RS (Mk4)

The Onyx Forged design office works out the measurements of your car from its exact version, stated on the registration document, and shows them to you before machining. Each set is cut from forged 6061-T6 aluminium, machined on a 5-axis CNC centre, as monoblock, two-piece or three-piece wheels; our wheels are designed to JWL/VIA standards. Prices by diameter and the lead time are given on this page, under “What Onyx can make”. Start your configuration or write to contact@onyxforgedwheels.com.

Configure custom wheels for your Škoda Octavia RS (Mk4): free 3D render, on request.

Useful guides

See all generations of the Škoda Octavia, or all Škoda models.