Custom forged wheels for Volkswagen Golf 8 GTI and R (2020-present)
Technical specifications
- Production period
- 2020-present
Original fitment measurements: Volkswagen Golf 8 GTI and R
The measurements of the car as delivered new, to identify yours and compare. Each value refers, by a number, to the sources that give it. They are not a recommendation: Onyx does not advise any specific offset.
Hub
| Measurement | Original value |
|---|---|
| PCD (bolt pattern) | 5x112 [1, 2, 3, 4, 5, 6] |
| Centre bore | 57.1 mm [1, 4, 5, 6, 7] |
| Thread | M14 x 1.5 [4, 5, 6] |
| Fixing | Wheel bolts [2, 6] |
| Bolt or nut seat | Not published |
| Tightening torque | Not published |
“Not published”: no source gives it with the certainty we require at this stage (see the rule below).
Original fitments by version
| Version and fitment | Front | Rear | ||||||
|---|---|---|---|---|---|---|---|---|
| Diameter | Width | Original offset (manufacturer) | Tyre | Diameter | Width | Original offset (manufacturer) | Tyre | |
| Golf R (2024 facelift), 18 inches (Jerez), standard | 18″ [8, 9] | — | — | 225/40 R18 [8, 9] | 18″ [8, 9] | — | — | 225/40 R18 [8, 9] |
| Golf R (2024 facelift), 19 inches (forged Warmenau), option (Volkswagen 2024 press kit); width and offset read from the wheel sold as a genuine accessory (Volkswagen Zubehör), can be fitted subject to conditions | 19″ [8, 10] | 8J [10] | ET 50 [10] | 235/35 R19 [8] | 19″ [8, 10] | 8J [10] | ET 50 [10] | 235/35 R19 [8] |
| Golf R (2024 facelift), 19 inches (Estoril), option; standard with the Performance package and on the Black Edition (Volkswagen 2024 press kit) | 19″ [8, 9] | — | — | 235/35 R19 [8, 9] | 19″ [8, 9] | — | — | 235/35 R19 [8, 9] |
| Golf R (2024 facelift), 18 inches (Huntsville), Volkswagen genuine accessory (Original Zubehör) | 18″ [3] | 7.5J [3] | ET 51 [3] | 225/40 R18 [3] | 18″ [3] | 7.5J [3] | ET 51 [3] | 225/40 R18 [3] |
| Golf GTI, 17 inches (Valencia), Volkswagen genuine accessory (Original Zubehör), pre-facelift Golf 8 GTI (2020-2023) | 17″ [11] | 7.5J [11] | ET 51 [11] | 225/45 R17 [11] | 17″ [11] | 7.5J [11] | ET 51 [11] | 225/45 R17 [11] |
| Golf GTI, 18 inches (Huntsville), Volkswagen genuine accessory (Original Zubehör) | 18″ [3] | 7.5J [3] | ET 51 [3] | 225/40 R18 [3] | 18″ [3] | 7.5J [3] | ET 51 [3] | 225/40 R18 [3] |
| Golf GTI, 19 inches (forged Warmenau), Volkswagen genuine accessory, facelifted GTI (2024) only | 19″ [10] | 8J [10] | ET 50 [10] | — | 19″ [10] | 8J [10] | ET 50 [10] | — |
“—”: measurement not published for lack of a sufficient source. The offsets are the original ones, given by the manufacturer or by the sources cited; they help you identify your car's fitment.
What Onyx can make for the Volkswagen Golf 8 GTI and R
Custom forged wheels in forged 6061-T6 aluminium, designed to JWL/VIA standards, in monoblock or two-piece construction; three-piece wheels are made on quotation.
The diameters below start at the smallest original diameter recorded on this car (17″) and go up to 24″.
| Diameter | Monoblock, set of four wheels | Two-piece, set of four wheels |
|---|---|---|
| 18″ | €3,200 Great Britain: £3,336 with UK import VAT | €4,300 Great Britain: £4,482 with UK import VAT |
| 19″ | €3,200 Great Britain: £3,336 with UK import VAT | €4,300 Great Britain: £4,482 with UK import VAT |
| 20″ | €3,300 Great Britain: £3,440.40 with UK import VAT | €4,400 Great Britain: £4,586.40 with UK import VAT |
| 21″ | €3,550 Great Britain: £3,700.80 with UK import VAT | €4,750 Great Britain: £4,951.20 with UK import VAT |
| 22″ | €3,750 Great Britain: £3,908.40 with UK import VAT | €5,200 Great Britain: £5,420.40 with UK import VAT |
| 23″ | €3,950 Great Britain: £4,117.20 with UK import VAT | €5,750 Great Britain: £5,992.80 with UK import VAT |
| 24″ | €4,100 Great Britain: £4,273.20 with UK import VAT | €6,300 Great Britain: £6,566.40 with UK import VAT |
Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.
Wheels delivered in 4 to 8 working weeks, shipping included, from full payment for an order on the website, or from the deposit for an order on quotation, and at the earliest from your approval of the measurements, the colour or the 3D render you asked for, under article 5.1 of the Terms and Conditions.
The offset and width of your wheels do not come from a table: the Onyx Forged design office calculates them for your car and your brakes, and submits them to you before machining.
Frequently asked questions: wheels for the Volkswagen Golf 8 GTI and R
Which original equipment wheels does the facelifted Golf R (2024) have?
As standard, the 18-inch Jerez wheel in 225/40. As options, the 19-inch Estoril (standard with the Performance package) or the forged 19-inch Warmenau, both in 235/35. [8, 9]
What is the smallest original fitment on a facelifted Golf R?
The 18-inch Jerez wheel, standard, in 225/40. Volkswagen's press kit describes an 18-inch braking system for this car; it does not say whether a smaller wheel is ruled out. [8, 9]
What is the offset of the 19-inch Warmenau wheel on a Golf 8?
Volkswagen Original Zubehör gives 8J x 19 with an offset of 50 for the forged Warmenau wheel, compatible with the facelifted Golf VIII GTI and R. Volkswagen only permits it with the front and rear wheel arch extensions and a steering angle limitation. [10]
Same fixing measurements
As original equipment, these cars have the same PCD, centre bore, thread and fixing as the Volkswagen Golf 8 GTI and R: PCD 5x112, centre bore 57.1 mm, thread M14 x 1.5, fixing: wheel bolts.
- Audi A3 and S3 8V (2012–2020)
- Audi A3 and S3 8Y (since 2020)
- Audi RS Q3 F3 (since 2019)
- Audi TT RS 8S (2016–2023)
- Cupra Born first generation (since 2021)
- Cupra Formentor KM (since 2020)
- Cupra Leon KL (since 2020)
- McLaren 720S coupé and Spider (2017–2023)
- MG MG4 first generation (since 2022)
- Škoda Octavia RS (Mk4) (since 2020)
Same fixing measurements; original diameters and offsets: see each car's page. The seat of the bolts or nuts, the width of the wheels and brake clearance are not compared here: this comparison is not an opinion on compatibility.
Sources for the measurements and answers
- hubcentric-rings.com (Frontside Oy), Volkswagen Golf by generation (secondary source, consulted on 10 October 2026)
- Volkswagen Original Zubehör (Volkswagen Zubehör GmbH), “Bergamo” wheel 7.5J x 18, ET 51 mm, Lochkreis 112/5, torque “Anzugsmoment Radschrauben [Nm]: 140”, ref. 5H0 071 498 A AX1; compatibility Golf VIII, GTI and R (CD and facelifted DA) in the page's code (primary source, consulted on 10 October 2026)
- Volkswagen Original Zubehör, “Huntsville” wheel 7.5J x 18, ET 51 mm, Lochkreis 112/5, tyre 225/40 R 18 92Y XL, torque “120|140”, ref. 5H0 071 498 3IC; compatibility Golf VI to VIII including Golf VIII GTI and R (CD and DA) in the page's code (primary source, consulted on 10 October 2026)
- wheel-sizes.com, Volkswagen Golf GTI, “Lug Nut Size” table (secondary source, consulted on 10 October 2026)
- wheelfitment.eu, Volkswagen Golf 8 GTI (secondary source, consulted on 3 October 2026)
- wheelfitment.eu, Volkswagen Golf 8 R (secondary source, consulted on 3 October 2026)
- wheel-sizes.com, Volkswagen Golf R, “Lug Nut Size” table (secondary source, consulted on 10 October 2026)
- Volkswagen Newsroom, press kit “The new Golf R and Golf R Variant” (2024) (primary source, consulted on 3 October 2026)
- wheel-size.com, Volkswagen Golf R 2025 (facelifted Mk8, “Facelift [2024 .. 2027]”) (secondary source, consulted on 4 October 2026)
- Volkswagen Original Zubehör, “Warmenau” wheel 8.0J x 19, ET 50 mm, Lochkreis 112/5, torque “Anzugsmoment Radschrauben [Nm]: 120”, ref. 5H0 071 499 A AX1; compatibility Golf VIII GTI Facelift, R Facelift and Variant R Facelift (seit 2024) in the page's code (primary source, consulted on 10 October 2026)
- Volkswagen Original Zubehör, “Valencia” wheel 7.5J x 17, ET 51 mm, Lochkreis 112/5, torque “Anzugsmoment Radschrauben [Nm]: 120”, ref. 5H0 071 497 A Z49; compatibility Golf VIII, Golf VIII GTI (Typ CD, 2020-2023) and Variant in the page's code (primary source, consulted on 10 October 2026)
Publication rule: a measurement is shown only if a primary source gives it (a manufacturer's document, an official vehicle type record, an original parts catalogue, the maker of the original wheel) without another primary source contradicting it, or if two independent specialist sources agree without a primary source contradicting them. The press and forums do not count. Measurements checked on 15 October 2026 by the Onyx Forged design office.
Designs for this generation
Three models from our catalogue, forged to measure for your Volkswagen Golf 8 GTI and R. The price is for a set of four wheels: it depends on the construction and the diameter.
OX-M1 ObsidianMonoblock · From €3,200 for a set of four wheelsGreat Britain: from £3,336 with UK import VAT
OX-TL10 TrellisMonoblock · From €3,200 for a set of four wheelsGreat Britain: from £3,336 with UK import VAT
OX-M2 MonacoTwo-piece · From €4,300 for a set of four wheelsGreat Britain: from £4,482 with UK import VAT
Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.
Custom forged wheels for the Volkswagen Golf 8 GTI and R
- Forged 6061-T6 aluminium
- 5-axis CNC machining
- Designed to JWL/VIA standards
- Fitment worked out for your Volkswagen Golf 8 GTI and R
Golf 8 GTI and R: 5x112 on a 57.1 mm hub
The Volkswagen Golf 8 GTI and R is 5x112, on a 57.1 mm hub, with M14 x 1.5 wheel bolts: several independent sources give these measurements, each cited in the table. The tightening torque is not published: the pages of Volkswagen's accessories shop do not agree with one another, and a specialist database gives yet another value. No source gives the bolt seat.
Facelifted Golf R: the Jerez as standard, two 19-inch wheels
Volkswagen's press kit for the facelifted Golf R gives the 18-inch Jerez wheel as standard with 225/40 R18 tyres, and as an option the Estoril or the forged Warmenau in 19 inches with 235/35 R19 tyres. Volkswagen Original Zubehör sells the Warmenau in 8J ET 50, and the 18-inch Huntsville in 7.5J ET 51, both compatible with the Golf R. These are genuine accessories, which the table marks as such. The width and offset of the Jerez and the Estoril are only published by one specialist database: they are left empty.
GTI: three genuine accessories
For the GTI, Volkswagen Original Zubehör gives the 17-inch Valencia in 7.5J ET 51 with 225/45 R17 tyres, reserved for the pre-facelift GTI, the 18-inch Huntsville in 7.5J ET 51 with 225/40 R18 tyres, and the 19-inch Warmenau in 8J ET 50, reserved for the facelifted GTI and for which Volkswagen does not give the tyre. Volkswagen only offers the Warmenau with the front and rear wheel arch extensions and a steering angle limitation.
What we record before machining
- The version and the phase, pre- or post-facelift Golf 8, stated on the registration document.
- The braking system: on the Golf R, Volkswagen describes a braking system designed for the 18-inch wheel.
- The current fitment, axle by axle.
Configure your forged wheels for the Volkswagen Golf 8 GTI and R
The Onyx Forged design office works out the measurements of your car from its exact version, stated on the registration document, and shows them to you before machining. Each set is cut from forged 6061-T6 aluminium, machined on a 5-axis CNC centre, as monoblock, two-piece or three-piece wheels; our wheels are designed to JWL/VIA standards. Prices by diameter and the lead time are given on this page, under “What Onyx can make”. Start your configuration or write to contact@onyxforgedwheels.com.
Configure custom wheels for your Volkswagen Golf 8 GTI and R: free 3D render, on request.
Useful guides
Other Volkswagen Golf generations
Onyx Forged designs and has wheels made for these generations too. Each one has its own PCD, offsets and sizes: make sure you are on yours.
- Volkswagen Golf 7 GTI and R forged wheels (2013–2020)
See all generations of the Volkswagen Golf, or all Volkswagen models.