Onyx Forged
FRENDENLPLITES

OX-S10 Shibuya — monoblock forged wheels for Tesla, Volkswagen, BMW…

In short: OX-S10 Shibuya: monoblock forged wheels, 18″ to 24″, priced per set of four wheels from €3,200.

The OX-S10 Shibuya is a monoblock forged wheel with ten slim spokes. The ten spokes leave a star-shaped hub, curve only slightly and run to the rim as they taper: a light, regular design with ten equal openings. The lip is thin and the rim edge crisp, leaving the design all the room it needs. At the centre, the cap carries the OX monogram. In satin black, the spokes stand out against the caliper; in satin bronze, they catch the light; in anthracite grey, the design stays discreet.

OX-S10 Shibuya forged wheel, satin black

Offered from 18″ to 24″. It suits compact sports cars and coupes even at the smallest diameter, as well as sporty saloons.

How to order

Choose the diameter and the finish, then give your car's make, model and year: that is all we need to take your order. The Onyx Forged design office works out the measurements and submits them to you before machining.

Price by diameter

Every price is for a set of four wheels; delivery is free to 35 European countries.

OX-S10 Shibuya: price of a set of four wheels by diameter
DiameterSet of four wheels
18″€3,200
19″€3,200
20″€3,300
21″€3,550
22″€3,750
23″€3,950
24″€4,100

Finishes

The finishes in the catalogue for this model, all at the same price for a given diameter:

  • Satin black
  • Satin bronze
  • Anthracite grey

Another colour, from our palette or from a RAL or other reference, can be made for the whole wheel: the price shown does not change, whatever the colour. Write to customer service.

Cast or forged: what a wheel weighs

SizeClassic castForged monoblock
17″9–11 kg6.5–8 kg
18″10–12 kg7.5–9 kg
19″11–14 kg8.5–10.5 kg
20″13–16 kg9.5–12 kg
21–22″15–19 kg11–14 kg
23–24″18–22 kg13–16.5 kg

Indicative values, for one wheel. The exact weight depends on the design, the width and the offset.

Engineering and specifications

  • Material: forged 6061-T6 aluminium; forging closes up the porosity that a cast wheel can retain.
  • Construction: monoblock, 5-axis CNC machined from a single piece. The same design can be studied as a two-piece or three-piece wheel, on quotation from customer service.
  • Measurements: PCD (bolt pattern), offset (ET) and centre bore machined for your car, to the measurements the Onyx Forged design office submits to you before machining; no spacers or spigot rings to add.
  • Standards: wheels designed to JWL/VIA standards.
  • Packaging: set of four wheels.

Have a sketch or an idea for a design? Customer service replies with a quotation, and the Onyx Forged design office draws your wheel to your car's measurements.

Delivery, payment and warranty

Delivered in 4 to 8 working weeks, transit time included, from full payment, and at the earliest from your approval of the measurements, the colour or the 3D render you asked for, under article 5.1 of the Terms and Conditions. Payment when you order on the website. At checkout, you pay by card or by bank transfer; Klarna is also offered, depending on your country and subject to acceptance. Card limit too low? Choose bank transfer at checkout. Free delivery to mainland France (including Corsica), Monaco, the whole European Union, Switzerland, the United Kingdom, Norway, Iceland, Andorra, San Marino and Liechtenstein, and to the French overseas departments and territories on quotation, which sets the delivery time. For a delivery subject to customs (overseas departments and territories, Switzerland, Great Britain…), import duties, taxes and customs clearance fees are paid by the recipient. Terms and Conditions.

5-year Onyx Forged commercial warranty from the date of delivery, covering manufacturing and material defects and structural failures not caused by abnormal use. This warranty is in addition to your statutory rights.

Their reviews of this model.

9 reviews collected earlier from customers of this model, reproduced here, newest first.

Average rating: 4.8 out of 5 · 9 reviews

  • 5 stars: 7
  • 4 stars: 2

  • Dix branches fines et une lèvre toute fine, le dessin respire. En noir satiné sur ma 718 Cayman, les étriers se voient entre chaque branche. Finition impeccable.

    Rating: 5 out of 5

    Léa F.

  • Jantes superbes et conformes, aucun défaut. Le transporteur a traîné, presque dix jours de plus que prévu, d'où l'étoile en moins.

    Rating: 4 out of 5

    Valentin R.

  • shibuya bronze satine sur ma m240i, c est exactement ce que je voulais, aerien et regulier. montage nickel, equilibrage sans masse ou presque

    Rating: 5 out of 5

    Mehdi A.

  • Un dessin régulier et élégant, dont les dix ouvertures égales donnent une grande légèreté visuelle. Les cotes ont été soumises avant l'usinage et les jantes livrées y correspondent précisément. Emballage soigné, délai tenu.

    Rating: 5 out of 5

    Camille P.

  • Les Shibuya sur ma Civic Type R 🔥 Légères, fines, propres. Je recommande.

    Rating: 5 out of 5

    Antoine B.

  • Commande depuis la Suisse, transporteur tracé et assuré comme indiqué, aucune mauvaise surprise. Les jantes sont très bien finies, le gris anthracite est régulier et le montage s'est fait sans adaptation.

    Rating: 5 out of 5

    Marion L.

  • Les jantes son parfaites, finition et cotes nickel. Par contre un carton est arrivé enfoncé sur un angle et le livreur a était bien lent. Heureusement la jante n'a rien.

    Rating: 4 out of 5

    Florian G.

  • Très belle qualité de fabrication, les branches sont fines mais rigides, aucune vibration même à haute vitesse. Le rendu 3D reçu avant la fabrication correspondait exactement au résultat.

    Rating: 5 out of 5

    Damien R.

  • Dix branches. Fines. Régulières. Noir satiné parfait. Délai tenu. Validé.

    Rating: 5 out of 5

    Alexis M.

All reviews received are published, with no filtering by rating. How we check reviews

Questions about the OX-S10 Shibuya

Will the OX-S10 Shibuya fit my car?

It is machined to your car's measurements. Give your car's make, model and year when you order: the Onyx Forged design office works out the PCD (bolt pattern), the offset (ET) and the centre bore, and submits them to you before machining. No spacers or spigot rings are needed. Our guides: PCD, bolt pattern and centre bore and brake caliper clearance.

What tyre size goes with a bigger wheel?

Our tyre size calculator compares your original tyre with a size for the new rim diameter: overall diameter, sidewall height and speedometer error, against the ETRTO tolerance. Your vehicle handbook, the tyre placard and your insurer have the final say. Our guide: How to read a tyre size (and the load and speed index).

Does the finish change the price of the OX-S10 Shibuya?

No. Every finish listed on this page costs the same for a given diameter, and another colour, from our palette or from a RAL or other reference, does not change the price shown either.

The other models

All the models in the catalogue · The monoblock construction

The same model, make by make

Each set is machined for a specific vehicle: the pages below bring together the models and generations already covered, make by make.

Guides and tools

Read before you choose, or check a fitment yourself:

All our guides · All tools