Onyx Forged
FREN

Forged wheels for BMW X6 M E71

Onyx Petra forged wheel

2009 – 2014

All our wheels in 20, 21 and 22″, made to your car's measurements. From €3,300 for a set of 4 in 20″. Free delivery to 35 European countries.

Great Britain: from £3,373.20 with UK import VAT, delivery included

Sizes offered: 20″ · 21″ · 22″. Prices below in 21″.

Our 45 wheels and their prices

Amounts in pounds: our checkout on 13 November 2026, for the wheels, delivery included (free), before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Exact measurements, offset, staggered fitment, concavity, another finish or diameter? Our workshop sets it all up with you. Contact the workshop

Technical specifications

Production period
2009-2014

Original fitment measurements: BMW X6 M E71

The measurements of the car as delivered new, to identify yours and compare. Each value refers, by a number, to the sources that give it. Our design office works out your offset and submits it to you before machining.

Hub

MeasurementOriginal value
PCD (bolt pattern)5x120 [1, 2]
Centre boreNot published
ThreadM14 x 1.25 [1, 2]
FixingWheel bolts [1, 2]
Bolt or nut seatNot published
Tightening torqueNot published

“Not published”: no source sure enough to show it yet.

Original fitments by version

Version and fitmentFrontRear
DiameterWidthOriginal offset (manufacturer)TyreDiameterWidthOriginal offset (manufacturer)Tyre
X6 M (E71), 408 kW V8, 20 inches, staggered fitment, original equipment20″ [3, 4, 5]10J [3, 4, 5]ET 40 [3, 4, 5]275/40 R20 [3, 4, 5]20″ [3, 4, 5]11J [3, 4, 5]ET 35 [3, 4, 5]315/35 R20 [3, 4, 5]
X6 M (E71), 408 kW V8, 21 inches, staggered fitment, original equipment21″ [3, 4, 5]10J [3, 4, 5]ET 40 [3, 4, 5]285/35 R21 [3, 4, 5]21″ [3, 4, 5]11.5J [3, 4, 5]ET 38 [3, 4, 5]325/30 R21 [3, 4, 5]

The offsets are the original ones, given by the manufacturer or by the sources cited; they help you identify your car's fitment.

What Onyx can make for the BMW X6 M E71

Custom forged wheels in forged 6061-T6 aluminium, designed to JWL/VIA standards, in monoblock or two-piece construction; three-piece wheels are made on quotation.

The diameters below start at the smallest original diameter recorded on this car (20″) and go up to 24″.

DiameterMonoblock, set of four wheelsTwo-piece, set of four wheels
20″€3,300
Great Britain: £3,373.20 with UK import VAT		€4,400
Great Britain: £4,497.60 with UK import VAT
21″€3,550
Great Britain: £3,628.80 with UK import VAT		€4,750
Great Britain: £4,855.20 with UK import VAT
22″€3,750
Great Britain: £3,832.80 with UK import VAT		€5,200
Great Britain: £5,314.80 with UK import VAT
23″€3,950
Great Britain: £4,038 with UK import VAT		€5,750
Great Britain: £5,877.60 with UK import VAT
24″€4,100
Great Britain: £4,190.40 with UK import VAT		€6,300
Great Britain: £6,439.20 with UK import VAT

Amounts in pounds: our checkout on 13 November 2026, for the wheels, delivery included (free), before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Wheels delivered in 4 to 8 working weeks, transit time included, from full payment, whether you order on the website or on quotation (or from the agreed deposit, if you asked for one), and at the earliest from your approval of the measurements, the colour or the 3D render you asked for, under article 5.1 of the Terms and Conditions.

Free delivery to 35 European countries (Terms and Conditions, article 5.2).

The offset and width of your wheels do not come from a table: the Onyx Forged design office calculates them for your car and your brakes, and submits them to you before machining.

Configure wheels for the BMW X6 M E71

Frequently asked questions: wheels for the BMW X6 M E71

What are the original offsets for the wheels of a BMW X6 M E71?

A staggered fitment, according to its Swiss vehicle type records: 10J with an offset of 40 at the front, in both 20 and 21 inches; at the rear, 11J x 20 with an offset of 35 or 11.5J x 21 with an offset of 38. [3, 5]

Which tyres, and which load index, does a BMW X6 M E71 take?

In 20 inches, 275/40 R20 with a load index of 106 at the front, i.e. 950 kg per tyre, and 315/35 R20 with an index of 110 at the rear, i.e. 1060 kg; in 21 inches, 285/35 R21 with an index of 105, i.e. 925 kg, and 325/30 R21 with an index of 108, i.e. 1000 kg. [3, 5, 6, 7]

What is the load per wheel on a BMW X6 M E71?

Its Swiss vehicle type records give a permissible load of 1,400 kg on the front axle and 1,520 kg on the rear axle, i.e. 700 and 760 kg per wheel. The 325/30 R21 rear tyre with a load index of 108 carries 1000 kg. [3, 5, 6, 7]

What PCD, centre bore and bolts does a BMW X6 M E71 use?

The PCD is 5x120; the centre bore is 74.1 mm at the front and 72.6 mm at the rear; the wheels are held by M14 x 1.25 wheel bolts, according to koleso.ee and SCC. The tightening torque is not published: only one of the sources read gives it. [1, 2]

Sources for the measurements and answers

  1. koleso.ee, BMW X6 M E71 [2009 .. 2014] (secondary source, consulted on 7 November 2026)
  2. SCC Fahrzeugtechnik (spurverbreiterung.de), BMW X6 M, type (E71) - X7M, 2009-2015 (secondary source, consulted on 7 November 2026)
  3. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1BB765 (BMW X6 M (E71), type M7X, 408 kW, July 2009): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 7 November 2026)
  4. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1BB975 (BMW X6 M (E71), type M7X, 408 kW, April 2010): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 7 November 2026)
  5. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1BC473 (BMW X6 M (E71), type M7X, 408 kW, March 2012): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 7 November 2026)
  6. Fiches-auto.fr, tyre load index table (index → kg) (reference table, for a conversion, consulted on 3 October 2026)
  7. UN Regulation No 30 (revision 3), Annex IV, tyre load capacity index table (index → kg), OJ L 201 of 30/07/2008 (reference table, for a conversion, consulted on 7 November 2026)

Each measurement shown comes from a cited source: a manufacturer's document, an official vehicle type record, an original parts catalogue, or two concurring specialist sources. Measurements checked on 7 November 2026 by the Onyx Forged design office.

Custom forged wheels for the BMW X6 M E71

  • Forged 6061-T6 aluminium
  • 5-axis CNC machining
  • Designed to JWL/VIA standards
  • Fitment worked out for your BMW X6 M E71

BMW X6 M E71: 5x120, two centre bores, M14 x 1.25 bolts

The BMW X6 M of the E71 series, with the 408 kW V8 engine, whose first Swiss vehicle type record dates from July 2009, is 5x120, with M14 x 1.25 wheel bolts; its hub does not have the same centre bore on both axles: 74.1 mm at the front, 72.6 mm at the rear. koleso.ee and SCC give these measurements, each cited in the table. Only one of the sources read gives the tightening torque: we do not publish it. The X6 M F86 that succeeds it has its own page.

A 20 and 21-inch staggered fitment

The vehicle type record of the Swiss Federal Roads Office (ASTRA), the document that sets the tyre and wheel combinations a car may carry, permits the same fitments for the X6 M as for the X5 M of the same period: 10J with an offset of 40 at the front, with 275/40 R20 or 285/35 R21 tyres; at the rear, 11J x 20 with an offset of 35 with 315/35 R20 tyres, or 11.5J x 21 with an offset of 38 with 325/30 R21 tyres.

The load the wheel must carry

Its records give a permissible load of 1,400 kg on the front axle and 1,520 kg on the rear axle, i.e. 700 and 760 kg per wheel: the guide wheels for a heavy car: the load per wheel explains what this asks of a wheel. The tyre keeps at least the load index of the original fitment, 106 and 110 in 20 inches, 105 and 108 in 21 inches (reading a tyre).

What these measurements say about a forged wheel

The offset positions the wheel in the wheel arch: a wider wheel, or a lower offset, brings it closer to the wing. The Onyx Forged design office starts from the measurements on this page, your brakes and your tyres to calculate the width and offset of your wheels, then submits them to you. The offset calculator compares two fitments: it compares, it does not choose the measurement for you.

Roadworthiness test: what is examined

The French roadworthiness test (contrôle technique) examines the wheel without removing it (cracks, deformation, a wheel that protrudes beyond the bodywork) and verifies that the tyre size is one provided for by the manufacturer or accepted as equivalent. Keeping a tyre size from the original fitment, and at least its load index, avoids having to justify it; the details are on the roadworthiness test and registration page.

What we record before machining

Configure your forged wheels for the BMW X6 M (E71)

The Onyx Forged design office works out the measurements of your car from its exact version, stated on the registration document, and shows them to you before machining. Each set is cut from forged 6061-T6 aluminium, machined on a 5-axis CNC centre, as monoblock, two-piece or three-piece wheels; our wheels are designed to JWL/VIA standards. Prices by diameter and the lead time are given on this page, under “What Onyx can make”. Start your configuration or write to contact@onyxforgedwheels.com.

Configure custom wheels for your BMW X6 M E71: free 3D render, on request.

Useful guides

Other BMW X6 M generations

Onyx Forged designs and has wheels made for these generations too. Each one has its own PCD, offsets and sizes: make sure you are on yours.

See all generations of the BMW X6 M, or all BMW models.