Forged wheels for Mercedes G 63 AMG (G-Class) W463A

• 5-year warranty
• Measurements checked before machining
• Can't be fitted to your car? Order cancelled and refunded (Terms and Conditions, article 3.3)
• At checkout, you pay by card or by bank transfer; Klarna is also offered, depending on your country and subject to acceptance

G 63 W463A: 5x130, an 84.1 mm hub, M14 x 1.5 bolts

The Mercedes-AMG G 63 of type 463A, whose first Swiss vehicle type record dates from April 2018, is 5x130 on an 84.1 mm hub, with M14 x 1.5 wheel bolts: wheelfitment.eu, koleso.ee, ThreePiece.us and SCC give these measurements, and hubcentric-rings.com the PCD and the centre bore, each cited in the table. The sources we have read do not agree on the tightening torque: we do not publish it.

Three fitments, from 20 to 22 inches, on all four wheels

The vehicle type record of the Swiss Federal Roads Office (ASTRA), the document that sets the tyre and wheel combinations a car may carry, permits three fitments for the G 63, each the same on all four wheels: 9.5J x 20 with an offset of 35, with 275/50 R20 tyres; 10J x 21 with an offset of 33, with 285/45 R21 tyres; 10J x 22 with an offset of 36, with 295/40 R22 tyres, all of them reinforced (XL). koleso.ee gives the same values; ThreePiece.us gives 36 for the 20-inch wheel, and the record prevails. There is no staggered fitment: the front and the rear have the same wheel.

The load the wheel must carry

The record gives a permissible load of 1,300 to 1,550 kg on the front axle and 1,650 to 1,900 kg on the rear axle, i.e. 650 to 775 kg per front wheel and 825 to 950 kg per rear wheel. That is the load the wheel must carry; the tyre must keep at least the load index of the original fitment, 113 in 20 and 21 inches, 112 in 22 inches (reading a tyre). The guide wheels for a heavy car: the load per wheel explains how to read it.

What these measurements say about a forged wheel

The offset positions the wheel in the wheel arch: a wider wheel, or a lower offset, brings it closer to the wing. The Onyx Forged design office starts from the measurements on this page, your brakes and your tyres to calculate the width and offset of your wheels, then submits them to you. The offset calculator compares two fitments: it compares, it does not choose the measurement for you.

Roadworthiness test: what is examined

The French roadworthiness test (contrôle technique) examines the wheel without removing it (cracks, deformation, a wheel that protrudes beyond the bodywork) and verifies that the tyre size is one provided for by the manufacturer or accepted as equivalent. Keeping a tyre size from the original fitment, and at least its load index, avoids having to justify it; the details are on the roadworthiness test and registration page.

What we record before machining

• The exact version, stated on the registration document, and the current diameter of your wheels.
• The braking system, on which the smallest possible diameter depends (wheels and brakes).
• The current fitment, axle by axle, and the hub's 84.1 mm centre bore according to the databases.

Configure your forged wheels for the Mercedes-AMG G 63 (W463A)

The Onyx Forged design office works out the measurements of your car from its exact version, stated on the registration document, and shows them to you before machining. Each set is cut from forged 6061-T6 aluminium, machined on a 5-axis CNC centre, as monoblock, two-piece or three-piece wheels; our wheels are designed to JWL/VIA standards. Prices by diameter and the lead time are given on this page, under “What Onyx can make”. Start your configuration or write to contact@onyxforgedwheels.com.

Configure custom wheels for your Mercedes G 63 AMG (G-Class) W463A: free 3D render, on request.

See all generations of the Mercedes G 63 AMG (G-Class), or all Mercedes models.