Onyx Forged
FREN

Forged wheels for Ford Focus ST (Mk3)

Onyx Kyoto forged wheel

2012 – 2018

All our wheels in 18, 19 and 20″, made to your car's measurements. From €3,200 for a set of 4 in 18″. Free delivery to 35 European countries.

Great Britain: from £3,271.20 with UK import VAT, delivery included

Sizes offered: 18″ · 19″ · 20″. Prices below in 19″.

Our 45 wheels and their prices

Amounts in pounds: our checkout on 13 November 2026, for the wheels, delivery included (free), before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Exact measurements, offset, staggered fitment, concavity, another finish or diameter? Our workshop sets it all up with you. Contact the workshop

Technical specifications

Production period
2012-2018

Original fitment measurements: Ford Focus ST (Mk3)

The measurements of the car as delivered new, to identify yours and compare. Each value refers, by a number, to the sources that give it. Our design office works out your offset and submits it to you before machining.

Hub

MeasurementOriginal value
PCD (bolt pattern)5x108 [1, 2, 3]
Centre bore63.4 mm [1, 2, 3]
ThreadM12 x 1.5 [1, 2, 3]
FixingWheel nuts [1, 2, 3]
Bolt or nut seatNot published
Tightening torqueNot published

“Not published”: no source sure enough to show it yet.

Original fitments by version

Version and fitmentFrontRear
DiameterWidthOriginal offset (manufacturer)TyreDiameterWidthOriginal offset (manufacturer)Tyre
Focus ST, 184 kW 2.0 EcoBoost and 136 kW 2.0 TDCi, five-door and estate, 17 inches, original equipment17″ [4, 5, 6, 7, 8, 9, 10, 11]7J [4, 5, 6, 7, 8, 9, 10, 11]ET 50 [4, 5, 6, 7, 8, 9, 10, 11]215/50 R17 [4, 5, 6, 7, 8, 9, 10, 11]17″ [4, 5, 6, 7, 8, 9, 10, 11]7J [4, 5, 6, 7, 8, 9, 10, 11]ET 50 [4, 5, 6, 7, 8, 9, 10, 11]215/50 R17 [4, 5, 6, 7, 8, 9, 10, 11]
Focus ST, 184 kW 2.0 EcoBoost and 136 kW 2.0 TDCi, five-door and estate, 18 inches, original equipment18″ [4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18]8J [4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18]ET 55 [4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18]235/40 R18 [4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18]18″ [4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18]8J [4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18]ET 55 [4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18]235/40 R18 [4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18]
Focus ST, 184 kW 2.0 EcoBoost and 136 kW 2.0 TDCi, five-door and estate, 19 inches, original equipment19″ [4, 5, 6, 7, 8, 9, 10, 11]8J [4, 5, 6, 7, 8, 9, 10, 11]ET 55 [4, 5, 6, 7, 8, 9, 10, 11]235/35 R19 [4, 5, 6, 7, 8, 9, 10, 11]19″ [4, 5, 6, 7, 8, 9, 10, 11]8J [4, 5, 6, 7, 8, 9, 10, 11]ET 55 [4, 5, 6, 7, 8, 9, 10, 11]235/35 R19 [4, 5, 6, 7, 8, 9, 10, 11]

The offsets are the original ones, given by the manufacturer or by the sources cited; they help you identify your car's fitment.

What Onyx can make for the Ford Focus ST (Mk3)

Custom forged wheels in forged 6061-T6 aluminium, designed to JWL/VIA standards, in monoblock or two-piece construction; three-piece wheels are made on quotation.

The diameters below start at the smallest original diameter recorded on this car (17″) and go up to 24″.

DiameterMonoblock, set of four wheelsTwo-piece, set of four wheels
18″€3,200
Great Britain: £3,271.20 with UK import VAT		€4,300
Great Britain: £4,395.60 with UK import VAT
19″€3,200
Great Britain: £3,271.20 with UK import VAT		€4,300
Great Britain: £4,395.60 with UK import VAT
20″€3,300
Great Britain: £3,373.20 with UK import VAT		€4,400
Great Britain: £4,497.60 with UK import VAT
21″€3,550
Great Britain: £3,628.80 with UK import VAT		€4,750
Great Britain: £4,855.20 with UK import VAT
22″€3,750
Great Britain: £3,832.80 with UK import VAT		€5,200
Great Britain: £5,314.80 with UK import VAT
23″€3,950
Great Britain: £4,038 with UK import VAT		€5,750
Great Britain: £5,877.60 with UK import VAT
24″€4,100
Great Britain: £4,190.40 with UK import VAT		€6,300
Great Britain: £6,439.20 with UK import VAT

Amounts in pounds: our checkout on 13 November 2026, for the wheels, delivery included (free), before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Wheels delivered in 4 to 8 working weeks, transit time included, from full payment, whether you order on the website or on quotation (or from the agreed deposit, if you asked for one), and at the earliest from your approval of the measurements, the colour or the 3D render you asked for, under article 5.1 of the Terms and Conditions.

Free delivery to 35 European countries (Terms and Conditions, article 5.2).

The offset and width of your wheels do not come from a table: the Onyx Forged design office calculates them for your car and your brakes, and submits them to you before machining.

Configure wheels for the Ford Focus ST (Mk3)

Frequently asked questions: wheels for the Ford Focus ST (Mk3)

What are the original wheel offsets for a Ford Focus ST Mk3?

According to its Swiss vehicle type records, the same wheel on all four corners: 8J with an offset of 55 in 18 and 19 inches and, on the records from 2014 onwards, 7J x 17 with an offset of 50. [4, 12]

Which tyres, and which load index, for a Ford Focus ST Mk3?

In 18 inches, 235/40 R18 with a load index of 95 for the petrol version, i.e. 690 kg per tyre; in 19 inches, 235/35 R19 with an index of 91, i.e. 615 kg; in 17 inches, 215/50 R17 with an index of 91; on all four corners. [4, 12, 19, 20]

What load per wheel for a Ford Focus ST Mk3?

The highest permissible load in its Swiss vehicle type records is 1,070 kg on the front axle and 1,035 kg on the rear axle (records 1XN992 and 1XP648), i.e. 535 and 517.5 kg per wheel: the engine is at the front. The 235/35 R19 tyre with a load index of 91 carries 615 kg. [10, 11, 19, 20]

Which PCD, centre bore and nuts for a Ford Focus ST Mk3?

The PCD is 5x108, the centre bore 63.4 mm, and the wheels are held by M12 x 1.5 wheel nuts, according to koleso.ee and SCC. The tightening torque is not published: the sources read do not agree. [1, 2, 3]

Sources for the measurements and answers

  1. koleso.ee, Ford Focus III (C346) [2011 .. 2015], ST trim (2.0 L R9DA, 184 kW) (secondary source, consulted on 8 November 2026)
  2. koleso.ee, Ford Focus III (C346) Facelift [2015 .. 2019], ST trim (2.0 L, 184 and 136 kW) (secondary source, consulted on 8 November 2026)
  3. SCC Fahrzeugtechnik (spurverbreiterung.de), Ford Focus ST, type DYB, 2012-2018 (secondary source, consulted on 8 November 2026)
  4. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1FJ877 (Ford Focus ST 2.0 SCTi, DYB; R9DC15(X), 184 kW, Limousine, December 2014): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 8 November 2026)
  5. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1FJ878 (Ford Focus ST 2.0 SCTi, DYB; R9DC16(X), 184 kW, Stationswagen, December 2014): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 8 November 2026)
  6. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1FJ879 (Ford Focus ST 2.0 TDCi, DYB; T8DA15(X), 136 kW, Limousine, December 2014): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 8 November 2026)
  7. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1FJ880 (Ford Focus ST 2.0 TDCi, DYB; T8DA16(X), 136 kW, Stationswagen, December 2014): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 8 November 2026)
  8. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1FK168 (Ford Focus ST 2.0 TDCi, DYB; T8DA15(X), 136 kW, Limousine, December 2015): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 8 November 2026)
  9. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1FK169 (Ford Focus ST 2.0 TDCi, DYB; T8DA16(X), 136 kW, Stationswagen, December 2015): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 8 November 2026)
  10. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1XN992 (Ford Focus ST 2.0 SCTi, DYB; R9DC15, 184 kW, Limousine, August 2016): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 8 November 2026)
  11. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1XP648 (Ford Focus ST 2.0 TDCi, DYB; T8DA16, 136 kW, Stationswagen, December 2016): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 8 November 2026)
  12. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1FJ419 (Ford Focus 2.0 ST, DYB; R9DA1K, 184 kW, Limousine, May 2012): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 8 November 2026)
  13. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1FJ420 (Ford Focus 2.0 ST, DYB; R9DA1L, 184 kW, Stationswagen, May 2012): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 8 November 2026)
  14. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1XE617 (Ford Focus 2.0 ST, DYB; R9DA1K, 184 kW, Limousine, February 2013): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 8 November 2026)
  15. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1XF244 (Ford Focus 2.0 ST, DYB; R9DA1K, 184 kW, Limousine, May 2013): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 8 November 2026)
  16. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1XF572 (Ford Focus 2.0 ST, DYB; R9DA1L, 184 kW, Stationswagen, July 2013): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 8 November 2026)
  17. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1XH701 (Ford Focus 2.0 ST, DYB; R9DA1K, 184 kW, Limousine, July 2014): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 8 November 2026)
  18. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1XJ480 (Ford Focus 2.0 ST, DYB; R9DA1K, 184 kW, Limousine, November 2014): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 8 November 2026)
  19. Fiches-auto.fr, tyre load index table (index → kg) (reference table, for a conversion, consulted on 3 October 2026)
  20. UN Regulation No 30 (revision 3), Annex IV, tyre load capacity index table (index → kg), OJ L 201 of 30/07/2008 (reference table, for a conversion, consulted on 8 November 2026)

Each measurement shown comes from a cited source: a manufacturer's document, an official vehicle type record, an original parts catalogue, or two concurring specialist sources. Measurements checked on 8 November 2026 by the Onyx Forged design office.

Custom forged wheels for the Ford Focus ST (Mk3)

  • Forged 6061-T6 aluminium
  • 5-axis CNC machining
  • Designed to JWL/VIA standards
  • Fitment worked out for your Ford Focus ST (Mk3)

Ford Focus ST Mk3: 5x108, a 63.4 mm hub, M12 x 1.5 nuts

The third-generation Ford Focus ST (type DYB), five-door or estate, as the 184 kW 2.0 EcoBoost and, from December 2014, the 136 kW 2.0 TDCi, whose first Swiss vehicle type record dates from May 2012, is 5x108 on a 63.4 mm hub, with M12 x 1.5 wheel nuts: koleso.ee and SCC give these measurements, each cited in the table. The two sources do not give the same tightening torque: we do not publish it. The Focus ST Mk4 that succeeds it has its own page.

17, 18 and 19 inches, on all four corners

The vehicle type record of the Swiss Federal Roads Office (ASTRA), the document that sets the tyre and wheel combinations a car may carry, permits the same wheel on all four corners for the Focus ST: 8J with an offset of 55 in 18 inches with 235/40 R18 tyres and, on the recent records, in 19 inches with 235/35 R19 tyres; in 17 inches, 7J with an offset of 50 with 215/50 R17 tyres.

The load the wheel must carry

The engine is at the front: the highest permissible load in its records is 1,070 kg on the front axle and 1,035 kg on the rear axle, i.e. 535 and 517.5 kg per wheel. The tyre keeps at least the load index of the original fitment, 95 in 235/40 R18 for the petrol version and 91 in 235/35 R19 (reading a tyre). Braking sets the smallest possible wheel diameter: the guide wheels and brakes explains why.

What these measurements say about a forged wheel

The offset positions the wheel in the wheel arch: a wider wheel, or a lower offset, brings it closer to the wing. The design office starts from the measurements on this page, your brakes and your tyres to calculate the width and offset of your wheels, then submits them to you. The offset calculator compares two fitments: it compares, it does not choose the measurement for you.

Roadworthiness test: what is examined

The French roadworthiness test (contrôle technique) examines the wheel without removing it (cracks, deformation, a wheel that protrudes beyond the bodywork) and verifies that the tyre size is one provided for by the manufacturer or accepted as equivalent. Keeping a tyre size from the original fitment, and at least its load index, avoids having to justify it; the details are on the roadworthiness test and registration page.

What we record before machining

Configure your forged wheels for the Ford Focus ST (Mk3)

Our design office establishes your car's measurements from its exact version, stated on the registration certificate, and presents them to you before machining. Each set is cut from forged 6061-T6 aluminium, machined on a 5-axis CNC centre, in monoblock, two-piece or three-piece construction; our wheels are designed to JWL/VIA standards. Prices by diameter and the lead time are given on this page, under “What Onyx can make”. Start your configuration or write to contact@onyxforgedwheels.com.

Configure custom wheels for your Ford Focus ST (Mk3): free 3D render, on request.

Useful guides

Other Ford Focus generations

Onyx Forged designs and has wheels made for these generations too. Each one has its own PCD, offsets and sizes: make sure you are on yours.

See all generations of the Ford Focus, or all Ford models.