Custom forged wheels for Porsche Macan 95B (2014-present)
Technical specifications
- Production period
- 2014-present
Original fitment measurements: Porsche Macan 95B
The measurements of the car as delivered new, to identify yours and compare. Each value refers, by a number, to the sources that give it. They are not a recommendation: Onyx does not advise any specific offset.
Hub
| Measurement | Original value |
|---|---|
| PCD (bolt pattern) | 5x112 [1, 2, 3, 4] |
| Centre bore | 66.5 mm [1, 2, 3] |
| Thread | M14 x 1.5 [2, 3, 4] |
| Fixing | Wheel bolts [2, 3, 4] |
| Bolt or nut seat | Not published |
| Tightening torque | 160 Nm [4, 5, 6] |
“Not published”: no source gives it with the certainty we require at this stage (see the rule below).
Original fitments by version
| Version and fitment | Front | Rear | ||||||
|---|---|---|---|---|---|---|---|---|
| Diameter | Width | Original offset (manufacturer) | Tyre | Diameter | Width | Original offset (manufacturer) | Tyre | |
| Macan, Macan S (95B), 18 inches, summer, Not permitted with ceramic brakes (manufacturer) [5] | 18″ [5] | 8J [5] | ET 21 [5] | 235/60 R18 [5] | 18″ [5] | 9J [5] | ET 21 [5] | 255/55 R18 [5] |
| Macan, Macan S (95B), 19 inches, summer | 19″ [5] | 8J [5] | ET 21 [5] | 235/55 R19 [5] | 19″ [5] | 9J [5] | ET 21 [5] | 255/50 R19 [5] |
| Macan, Macan S (95B), 20 inches, summer | 20″ [5] | 9J [5] | ET 26 [5] | 265/45 R20 [5] | 20″ [5] | 10J [5] | ET 19 [5] | 295/40 R20 [5] |
| Macan, Macan S (95B), 21 inches, summer | 21″ [5] | 9J [5] | ET 26 [5] | 265/40 R21 [5] | 21″ [5] | 10J [5] | ET 19 [5] | 295/35 R21 [5] |
| Macan GTS, Macan Turbo (95B), 19 inches, summer | 19″ [5] | 8J [5] | ET 21 [5] | 235/55 R19 [5] | 19″ [5] | 9J [5] | ET 21 [5] | 255/50 R19 [5] |
| Macan GTS, Macan Turbo (95B), 20 inches, summer | 20″ [5] | 9J [5] | ET 26 [5] | 265/45 R20 [5] | 20″ [5] | 10J [5] | ET 19 [5] | 295/40 R20 [5] |
| Macan GTS, Macan Turbo (95B), 21 inches, summer | 21″ [5] | 9J [5] | ET 26 [5] | 265/40 R21 [5] | 21″ [5] | 10J [5] | ET 19 [5] | 295/35 R21 [5] |
| Macan III: Macan, 19 inches, summer | 19″ [6] | 8.5J [6] | ET 21 [6] | 235/55 R19 [6] | 19″ [6] | 9J [6] | ET 21 [6] | 255/50 R19 [6] |
| Macan III: Macan, 20 inches, summer | 20″ [6] | 9J [6] | ET 26 [6] | 265/45 R20 [6] | 20″ [6] | 10J [6] | ET 19 [6] | 295/40 R20 [6] |
| Macan III: Macan, 21 inches, summer | 21″ [6] | 9.5J [6] | ET 27 [6] | 265/40 R21 [6] | 21″ [6] | 10J [6] | ET 19 [6] | 295/35 R21 [6] |
| Macan III: Macan S, Macan GTS, Macan T, 20 inches, summer | 20″ [6] | 9J [6] | ET 26 [6] | 265/45 R20 [6] | 20″ [6] | 10J [6] | ET 19 [6] | 295/40 R20 [6] |
| Macan III: Macan S, Macan GTS, Macan T, 21 inches, summer | 21″ [6] | 9.5J [6] | ET 27 [6] | 265/40 R21 [6] | 21″ [6] | 10J [6] | ET 19 [6] | 295/35 R21 [6] |
The offsets are the original ones, given by the manufacturer or by the sources cited; they help you identify your car's fitment.
What Onyx can make for the Porsche Macan 95B
Custom forged wheels in forged 6061-T6 aluminium, designed to JWL/VIA standards, in monoblock or two-piece construction; three-piece wheels are made on quotation.
The diameters below start at the smallest original diameter recorded on this car (18″) and go up to 24″.
| Diameter | Monoblock, set of four wheels | Two-piece, set of four wheels |
|---|---|---|
| 18″ | €3,200 Great Britain: £3,336 with UK import VAT | €4,300 Great Britain: £4,482 with UK import VAT |
| 19″ | €3,200 Great Britain: £3,336 with UK import VAT | €4,300 Great Britain: £4,482 with UK import VAT |
| 20″ | €3,300 Great Britain: £3,440.40 with UK import VAT | €4,400 Great Britain: £4,586.40 with UK import VAT |
| 21″ | €3,550 Great Britain: £3,700.80 with UK import VAT | €4,750 Great Britain: £4,951.20 with UK import VAT |
| 22″ | €3,750 Great Britain: £3,908.40 with UK import VAT | €5,200 Great Britain: £5,420.40 with UK import VAT |
| 23″ | €3,950 Great Britain: £4,117.20 with UK import VAT | €5,750 Great Britain: £5,992.80 with UK import VAT |
| 24″ | €4,100 Great Britain: £4,273.20 with UK import VAT | €6,300 Great Britain: £6,566.40 with UK import VAT |
Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.
Wheels delivered in 4 to 8 working weeks, shipping included, from full payment for an order on the website, or from the deposit for an order on quotation, and at the earliest from your approval of the measurements, the colour or the 3D render you asked for, under article 5.1 of the Terms and Conditions.
The offset and width of your wheels do not come from a table: the Onyx Forged design office calculates them for your car and your brakes, and submits them to you before machining.
Frequently asked questions: wheels for the Porsche Macan 95B
What is the wheel tightening torque on a Porsche Macan (95B)?
160 Nm, according to Porsche's bulletins on permitted wheels and tyres. Some specialist databases publish other values: we use Porsche's. [4, 5, 6]
Does the Macan III have the same fitments as the earlier Macan?
At the front in 19 inches, the Macan III moves from 8J to 8.5J, and in 21 inches from 9J ET 26 to 9.5J ET 27. At the rear, 9J ET 21 in 19 inches and 10J ET 19 in 20 and 21 inches do not change. The 18-inch summer fitment of the Macan and Macan S no longer appears in the Macan III bulletin. [5, 6]
Do the 20 and 21-inch fitments on a Macan require wheel arch extensions?
At the rear, yes: for these two diameters, Porsche's bulletins permit the combination only with wheel arch extensions (bulletin 37/21) or a wheel arch cover (bulletin 27/25). [5, 6]
Same fixing measurements
As original equipment, these cars have the same PCD, centre bore, thread and fixing as the Porsche Macan 95B: PCD 5x112, centre bore 66.5 mm, thread M14 x 1.5, fixing: wheel bolts.
- Audi Q5 and SQ5 FY (2017–2024)
- Audi RS5 B8 (2010–2015)
- Audi RS5 B9 (2017–2025)
- Audi RS6 C8 (since 2019)
- Audi S4 B9 (2016–2024)
- Audi S5 B9 (2016–2024)
Same fixing measurements; original diameters and offsets: see each car's page. The seat of the bolts or nuts, the width of the wheels and brake clearance are not compared here: this comparison is not an opinion on compatibility.
Sources for the measurements and answers
- hubcentric-rings.com (Frontside Oy), Porsche Macan (secondary source, consulted on 10 October 2026)
- SCC Fahrzeugtechnik, vehicle record Porsche Macan, 95B, 95BN, 2014-2023 (secondary source, consulted on 15 October 2026)
- wheelfitment.eu, Porsche Macan (2014 - ) (secondary source, consulted on 15 October 2026)
- wheel-sizes.com, Porsche Macan wheel nuts and bolts (secondary source, consulted on 15 October 2026)
- Porsche, manufacturer bulletin Macan (95B) “Approved Wheels and Tires” 37/21, May 2021 (all Macan models, “as of 2014”) (primary source, consulted on 15 October 2026)
- Porsche, manufacturer bulletin Macan (95B) “Approved: Wheels and Tires” 27/25, June 2025 (Macan III, “as of 2022”) (primary source, consulted on 15 October 2026)
Publication rule: a measurement is shown only if a primary source gives it (a manufacturer's document, an official vehicle type record, an original parts catalogue, the maker of the original wheel) without another primary source contradicting it, or if two independent specialist sources agree without a primary source contradicting them. The press and forums do not count. Measurements checked on 15 October 2026 by the Onyx Forged design office.
Designs for this generation
Three models from our catalogue, forged to measure for your Porsche Macan 95B. The price is for a set of four wheels: it depends on the construction and the diameter.
OX-DC7 MistralMonoblock · From €3,200 for a set of four wheelsGreat Britain: from £3,336 with UK import VAT
OX-M1 ObsidianMonoblock · From €3,200 for a set of four wheelsGreat Britain: from £3,336 with UK import VAT
OX-D1 LegacyTwo-piece · From €4,300 for a set of four wheelsGreat Britain: from £4,482 with UK import VAT
Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.
Custom forged wheels for the Porsche Macan 95B
- Forged 6061-T6 aluminium
- 5-axis CNC machining
- Designed to JWL/VIA standards
- Fitment worked out for your Porsche Macan 95B
Macan 95B: 5x112 on a 66.5 mm hub
The combustion-engined Macan, type 95B, is 5x112, on a 66.5 mm hub, with M14 x 1.5 wheel bolts: four independent specialist sources give the PCD (bolt pattern), three the centre bore, three the thread, and each is cited in the table. Porsche's bulletins on permitted wheels and tyres give a tightening torque of 160 Nm; some specialist databases publish a different value, and we follow Porsche. The bolt seat is given by only one source: it is not published here.
Low original offsets, and a wider rear
The Macan's original offsets are low. According to Porsche's 2021 bulletin, the Macan and Macan S take 8J ET 21 at the front in 18 and 19 inches, then 9J ET 26 in 20 and 21 inches; at the rear, 9J ET 21 in 18 and 19 inches, then 10J ET 19 in 20 and 21 inches. The GTS and Turbo have no 18-inch fitment, and the 18-inch fitment of the Macan and Macan S is excluded with PCCB ceramic brakes. The two axles share neither width nor offset: a front wheel and a rear wheel are never interchangeable.
Macan III: what changes
For the Macan III, Porsche's bulletin for model year 2022 onwards keeps the same rear fitments but changes the front: 8.5J ET 21 in 19 inches, 9.5J ET 27 in 21 inches. The 18-inch summer fitment no longer appears in it, and the 19-inch fitment is reserved for the base Macan: the Macan S, GTS and T take 20 or 21-inch wheels. A wheel sized for an earlier Macan therefore cannot be carried over to a Macan III without checking.
Wheel arch extensions at the rear
For the 20 and 21-inch fitments, Porsche's bulletins permit the combination only with wheel arch extensions or a wheel arch cover at the rear. We record the exact fitment of your car before any machining.
Configure your forged wheels for the Macan 95B
The Onyx Forged design office works out the measurements of your car from its exact version, stated on the registration document, and shows them to you before machining. Each set is cut from forged 6061-T6 aluminium, machined on a 5-axis CNC centre, as monoblock, two-piece or three-piece wheels; our wheels are designed to JWL/VIA standards. Prices by diameter and the lead time are given on this page, under “What Onyx can make”. Start your configuration or write to contact@onyxforgedwheels.com.
Configure custom wheels for your Porsche Macan 95B: free 3D render, on request.
Useful guides
Other Porsche Macan generations
Onyx Forged designs and has wheels made for these generations too. Each one has its own PCD, offsets and sizes: make sure you are on yours.
- Porsche Macan Electric (XAB) forged wheels (since 2024)
See all generations of the Porsche Macan, or all Porsche models.