Custom forged wheels for BMW 1 Series F40 (2019-2024)
Technical specifications
- Production period
- 2019-2024
Original fitment measurements: BMW 1 Series F40
The measurements of the car as delivered new, to identify yours and compare. Each value refers, by a number, to the sources that give it. They are not a recommendation: Onyx does not advise any specific offset.
Hub
| Measurement | Original value |
|---|---|
| PCD (bolt pattern) | 5x112 [1, 2] |
| Centre bore | 66.6 mm [1, 2] |
| Thread | M14 x 1.25 [1, 2] |
| Fixing | Wheel bolts [1, 2] |
| Bolt or nut seat | Not published |
| Tightening torque | Not published |
“Not published”: no source gives it with the certainty we require at this stage (see the rule below).
Original fitments by version
| Version and fitment | Front | Rear | ||||||
|---|---|---|---|---|---|---|---|---|
| Diameter | Width | Original offset (manufacturer) | Tyre | Diameter | Width | Original offset (manufacturer) | Tyre | |
| 1 Series 5-door (F40), 19 inches (M Performance Doppelspeiche 555), complete summer wheels, BMW M Performance genuine accessory (complete wheel) | 19″ [3] | 8J [3] | ET 54 [3] | 235/35 R19 [3] | 19″ [3] | 8J [3] | ET 54 [3] | 235/35 R19 [3] |
| 1 Series 5-door (F40), 19 inches (M Doppelspeiche 552), BMW genuine accessory (wheel) | 19″ [4] | 8J [4] | ET 54 [4] | — | 19″ [4] | 8J [4] | ET 54 [4] | — |
| 1 Series 5-door (F40), 18 inches (M Y-Speiche 553), BMW genuine accessory (wheel) | 18″ [5] | 8J [5] | ET 54 [5] | — | 18″ [5] | 8J [5] | ET 54 [5] | — |
| 1 Series 5-door (F40), 17 inches (Vielspeiche 547), BMW genuine accessory (wheel) | 17″ [6] | 7.5J [6] | ET 54 [6] | — | 17″ [6] | 7.5J [6] | ET 54 [6] | — |
| 1 Series 5-door (F40), 16 inches (Sternspeiche 517), BMW genuine accessory (wheel) | 16″ [7] | 7J [7] | ET 47 [7] | — | 16″ [7] | 7J [7] | ET 47 [7] | — |
“—”: measurement not published for lack of a sufficient source. The offsets are the original ones, given by the manufacturer or by the sources cited; they help you identify your car's fitment.
What Onyx can make for the BMW 1 Series F40
Custom forged wheels in forged 6061-T6 aluminium, designed to JWL/VIA standards, in monoblock or two-piece construction; three-piece wheels are made on quotation.
The diameters below start at the smallest original diameter recorded on this car (16″) and go up to 24″.
| Diameter | Monoblock, set of four wheels | Two-piece, set of four wheels |
|---|---|---|
| 18″ | €3,200 Great Britain: £3,336 with UK import VAT | €4,300 Great Britain: £4,482 with UK import VAT |
| 19″ | €3,200 Great Britain: £3,336 with UK import VAT | €4,300 Great Britain: £4,482 with UK import VAT |
| 20″ | €3,300 Great Britain: £3,440.40 with UK import VAT | €4,400 Great Britain: £4,586.40 with UK import VAT |
| 21″ | €3,550 Great Britain: £3,700.80 with UK import VAT | €4,750 Great Britain: £4,951.20 with UK import VAT |
| 22″ | €3,750 Great Britain: £3,908.40 with UK import VAT | €5,200 Great Britain: £5,420.40 with UK import VAT |
| 23″ | €3,950 Great Britain: £4,117.20 with UK import VAT | €5,750 Great Britain: £5,992.80 with UK import VAT |
| 24″ | €4,100 Great Britain: £4,273.20 with UK import VAT | €6,300 Great Britain: £6,566.40 with UK import VAT |
Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.
Wheels delivered in 4 to 8 working weeks, shipping included, from full payment for an order on the website, or from the deposit for an order on quotation, and at the earliest from your approval of the measurements, the colour or the 3D render you asked for, under article 5.1 of the Terms and Conditions.
The offset and width of your wheels do not come from a table: the Onyx Forged design office calculates them for your car and your brakes, and submits them to you before machining.
Frequently asked questions: wheels for the BMW 1 Series F40
What are the original offsets for the wheels of a BMW 1 Series F40?
The shop of the BMW dealer FABA lists, for the 1 Series 5-door (F40), wheels from its catalogue, front and rear alike: 16 inches in 7J with an offset of 47, 17 inches in 7.5J with an offset of 54, and 18 and 19 inches in 8J with an offset of 54. The shop states that the car's model series is not enough and asks for the chassis number to be checked. [4, 5, 6, 7]
Which 19-inch complete wheel is listed for a BMW 1 Series F40?
The M Performance Doppelspeiche 555 complete summer wheel: a 19-inch wheel in 8J with an offset of 54, 235/35 R19 tyres. BMW FABA lists it as compatible with the 1 Series 5-door F40, subject to the chassis number. [3]
What PCD, centre bore and bolts does a BMW 1 Series F40 use?
The PCD is 5x112, the centre bore 66.6 mm and the wheel bolts are M14 x 1.25: SCC and koleso.ee give this. hubcentric-rings.com gives a different centre bore for the F40; we follow SCC and koleso.ee, which agree, pending a BMW document. [1, 2]
Same fixing measurements
As original equipment, these cars have the same PCD, centre bore, thread and fixing as the BMW 1 Series F40: PCD 5x112, centre bore 66.6 mm, thread M14 x 1.25, fixing: wheel bolts.
- BMW i4 M50 (G26) (2021–2025)
- BMW M2 G87 (since 2023)
- BMW M240i G42 (since 2021)
- BMW M340i G20 and G21 (since 2019)
- BMW M440i G22 and G23 (since 2020)
- BMW M5 F90 (2017–2023)
- BMW 3 Series G20 (since 2019)
- BMW X3 M F97 (2019–2024)
- BMW X4 M F98 (2019–2025)
- BMW X5 G05 (since 2018)
- BMW Z4 G29 (since 2018)
- MINI Cooper F56 (2014–2024)
Same fixing measurements; original diameters and offsets: see each car's page. The seat of the bolts or nuts, the width of the wheels and brake clearance are not compared here: this comparison is not an opinion on compatibility.
Sources for the measurements and answers
- koleso.ee, BMW 1 Series III (F40) 2019-2024, by engine (M135i xDrive included) (secondary source, consulted on 15 October 2026)
- SCC Fahrzeugtechnik, vehicle record BMW 1er (F1H, F40), 2019-2024 (secondary source, consulted on 15 October 2026)
- BMW FABA (BMW dealer), 19-inch M Performance Doppelspeiche 555 complete summer wheels, 8J x 19 ET 54, 235/35 R19 tyres, ref. 36115A143D2, “1er 5-Türer F40 (2019-2024)” (primary source, consulted on 15 October 2026)
- BMW FABA (BMW dealer), 19-inch BMW M Doppelspeiche 552 wheel, 8J, offset 54, ref. 36118092356, “1er 5-Türer F40 (2019-2024)” (primary source, consulted on 15 October 2026)
- BMW FABA (BMW dealer), 18-inch BMW Y-Speiche 553 M wheel, 8J, offset 54, ref. 36118092355, “1er 5-Türer F40 (2019-2024)” (primary source, consulted on 15 October 2026)
- BMW FABA (BMW dealer), 17-inch BMW Vielspeiche 547 wheel, 7.5J, offset 54, ref. 36116856085, “1er 5-Türer F40 (2019-2024)” (primary source, consulted on 15 October 2026)
- BMW FABA (BMW dealer), 16-inch BMW Sternspeiche 517 wheel, 7J, offset 47, ref. 36116897609, “1er 5-Türer F40 (2019-2024)” (primary source, consulted on 15 October 2026)
Publication rule: a measurement is shown only if a primary source gives it (a manufacturer's document, an official vehicle type record, an original parts catalogue, the maker of the original wheel) without another primary source contradicting it, or if two independent specialist sources agree without a primary source contradicting them. The press and forums do not count. Measurements checked on 15 October 2026 by the Onyx Forged design office.
Designs for this generation
Three models from our catalogue, forged to measure for your BMW 1 Series F40. The price is for a set of four wheels: it depends on the construction and the diameter.
OX-Y7 VenomMonoblock · From €3,200 for a set of four wheelsGreat Britain: from £3,336 with UK import VAT
OX-C9 RazorMonoblock · From €3,200 for a set of four wheelsGreat Britain: from £3,336 with UK import VAT
OX-D15 HeritageTwo-piece · From €4,300 for a set of four wheelsGreat Britain: from £4,482 with UK import VAT
Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.
Custom forged wheels for the BMW 1 Series F40
- Forged 6061-T6 aluminium
- 5-axis CNC machining
- Designed to JWL/VIA standards
- Fitment worked out for your BMW 1 Series F40
1 Series F40: 5x112 on a 66.6 mm hub
The BMW 1 Series 5-door, type F40, produced from 2019 to 2024, is 5x112, on a 66.6 mm hub, with M14 x 1.25 wheel bolts: SCC and koleso.ee, two independent specialist sources, give these measurements, each cited in the table, and koleso.ee lists the M135i xDrive among the engines that share them. hubcentric-rings.com gives a different centre bore for the F40; we follow the first two, which agree, as no BMW document settles the question. The tightening torque is not published: only one database gives one, and no BMW document we have read settles it; keep to the one in your car's manual. The bolt seat is given by only one source: it is not published here.
The BMW catalogue wheels, from 16 to 19 inches
The shop of the BMW dealer FABA, which sells genuine BMW parts and accessories, lists wheels for the 1 Series F40, showing the part number and the compatible car for each, front and rear alike. In 16 inches, the Sternspeiche 517 in 7J with an offset of 47. In 17 inches, the Vielspeiche 547 in 7.5J with an offset of 54. In 18 inches, the Y-Speiche 553 M in 8J with an offset of 54. In 19 inches, the M Doppelspeiche 552 in 8J with an offset of 54. The shop states that the car's model series is not enough to guarantee that a wheel fits, and asks for the chassis number to be checked.
A 19-inch complete wheel
The same shop sells the M Performance Doppelspeiche 555 complete summer wheel, in 8J x 19 with an offset of 54 and 235/35 R19 tyres. It is the only complete fitment the catalogue gives: the wheels sold on their own have no tyre size, and the cell stays empty.
Genuine accessories, not standard fitments
These wheels are genuine accessories: the catalogue gives their part number and the compatible car, but does not say which of them are fitted when new, or for which engine, and this page does not claim to.
What we record before machining
- The exact version, M135i xDrive or another engine, stated on the registration document.
- The braking system, on which the smallest possible diameter depends.
- The current fitment, axle by axle, and the hub centre bore, on which the sources differ and which we check.
Configure your forged wheels for the BMW 1 Series F40
The Onyx Forged design office works out the measurements of your car from its exact version, stated on the registration document, and shows them to you before machining. Each set is cut from forged 6061-T6 aluminium, machined on a 5-axis CNC centre, as monoblock, two-piece or three-piece wheels; our wheels are designed to JWL/VIA standards. Prices by diameter and the lead time are given on this page, under “What Onyx can make”. Start your configuration or write to contact@onyxforgedwheels.com.
Configure custom wheels for your BMW 1 Series F40: free 3D render, on request.
Useful guides
See all generations of the BMW 1 Series, or all BMW models.