Onyx Forged
FREN

Forged wheels for Ferrari Purosangue since 2023

Onyx Kyoto forged wheel

Since 2023

All our wheels in 22, 23 and 24″, made to your car's measurements. From €3,750 for a set of 4 in 22″. Free delivery to 35 European countries.

Great Britain: from £3,832.80 with UK import VAT, delivery included

Sizes offered: 22″ · 23″ · 24″. Prices below in 23″.

Our 45 wheels and their prices

Amounts in pounds: our checkout on 13 November 2026, for the wheels, delivery included (free), before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Exact measurements, offset, staggered fitment, concavity, another finish or diameter? Our workshop sets it all up with you. Contact the workshop

Technical specifications

Production period
2023-present

Original fitment measurements: Ferrari Purosangue first generation

The measurements of the car as delivered new, to identify yours and compare. Each value refers, by a number, to the sources that give it. Our design office works out your offset and submits it to you before machining.

Hub

MeasurementOriginal value
PCD (bolt pattern)5x114.3 [1, 2, 3, 4, 5]
Centre bore67.1 mm [1, 2, 3, 4, 5]
ThreadM14 x 1.5 [1, 2, 3, 4, 5]
FixingWheel bolts [1, 2, 3, 5]
Bolt or nut seatNot published
Tightening torqueNot published

“Not published”: no source sure enough to show it yet.

Original fitments by version

Version and fitmentFrontRear
DiameterWidthOriginal offset (manufacturer)TyreDiameterWidthOriginal offset (manufacturer)Tyre
Purosangue (529 kW, all-wheel drive), 22 and 23 inches, original equipment22″ [6, 7, 8, 9, 10, 11, 12, 13]9J [6, 7, 8, 9, 10, 11, 12, 13]ET 43.7 [6, 7, 8, 9, 10, 11, 12, 13]255/35 R22 [6, 7, 8, 9, 10, 11, 12, 13]23″ [6, 7, 8, 9, 10, 11, 12, 13]11J [6, 7, 8, 9, 10, 11, 12, 13]ET 34.7 [6, 7, 8, 9, 10, 11, 12, 13]315/30 R23 [6, 7, 8, 9, 10, 11, 12, 13]
Purosangue (529 kW, all-wheel drive), 22 and 23 inches, winter tyres, original equipment (winter tyres)22″ [6, 7, 8, 9, 10, 11, 12, 13]9J [6, 7, 8, 9, 10, 11, 12, 13]ET 43.7 [6, 7, 8, 9, 10, 11, 12, 13]255/35 R22 [6, 7, 8, 9, 10, 11, 12, 13]23″ [6, 7, 8, 9, 10, 11, 12, 13]11J [6, 7, 8, 9, 10, 11, 12, 13]ET 34.7 [6, 7, 8, 9, 10, 11, 12, 13]315/30 R23 [6, 7, 8, 9, 10, 11, 12, 13]

The offsets are the original ones, given by the manufacturer or by the sources cited; they help you identify your car's fitment.

Offset to one decimal place (“ET 43.7”): the offset as the manufacturer gives it, to one decimal place, shown as it is, without rounding.

What Onyx can make for the Ferrari Purosangue first generation

Custom forged wheels in forged 6061-T6 aluminium, designed to JWL/VIA standards, in monoblock or two-piece construction; three-piece wheels are made on quotation.

The diameters below start at the smallest original diameter recorded on this car (22″) and go up to 24″.

DiameterMonoblock, set of four wheelsTwo-piece, set of four wheels
22″€3,750
Great Britain: £3,832.80 with UK import VAT		€5,200
Great Britain: £5,314.80 with UK import VAT
23″€3,950
Great Britain: £4,038 with UK import VAT		€5,750
Great Britain: £5,877.60 with UK import VAT
24″€4,100
Great Britain: £4,190.40 with UK import VAT		€6,300
Great Britain: £6,439.20 with UK import VAT

Amounts in pounds: our checkout on 13 November 2026, for the wheels, delivery included (free), before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Wheels delivered in 4 to 8 working weeks, transit time included, from full payment, whether you order on the website or on quotation (or from the agreed deposit, if you asked for one), and at the earliest from your approval of the measurements, the colour or the 3D render you asked for, under article 5.1 of the Terms and Conditions.

Free delivery to 35 European countries (Terms and Conditions, article 5.2).

The offset and width of your wheels do not come from a table: the Onyx Forged design office calculates them for your car and your brakes, and submits them to you before machining.

Configure wheels for the Ferrari Purosangue first generation

Frequently asked questions: wheels for the Ferrari Purosangue first generation

What are the original offsets for the wheels of a Ferrari Purosangue?

A single fitment, with two diameters, according to its Swiss vehicle type records: 9J x 22 with an offset of 43.7 mm at the front and 11J x 23 with an offset of 34.7 mm at the rear, in summer as in winter. Ferrari gives them to a tenth of a millimetre: the fitment table reproduces them as they are, without rounding them; ThreePiece.us rounds them. [3, 6, 13]

Which tyres, and which load index, does a Ferrari Purosangue take?

255/35 R22 with load index 99 at the front, i.e. 775 kg per tyre, and 315/30 R23 with load index 108 at the rear, i.e. 1000 kg. In winter, the records permit the same sizes and the same load indices, on the same wheels. [6, 13, 14, 15]

What is the load per wheel on a Ferrari Purosangue?

Its Swiss vehicle type records give it a permissible load of 1,180 kg on the front axle and 1,545 kg on the rear axle, i.e. 590 and 772.5 kg per wheel: the rear carries the most. The 255/35 R22 front tyre with load index 99 carries 775 kg. [6, 13, 14, 15]

What PCD, centre bore and bolts does a Ferrari Purosangue use?

The PCD is 5x114.3, the centre bore 67.1 mm, and the wheels are held by M14 x 1.5 bolts, according to wheelfitment.eu, koleso.ee, ThreePiece.us and SCC; tirewheelguide.com also gives the PCD, the centre bore and the thread. None of the sources we have read gives the tightening torque: we do not publish it. [1, 2, 3, 4, 5]

Same fixing measurements

As original equipment, these cars have the same PCD, centre bore, thread and fixing as the Ferrari Purosangue first generation: PCD 5x114.3, centre bore 67.1 mm, thread M14 x 1.5, fixing: wheel bolts.

Same fixing measurements; original diameters and offsets: see each car's page. Bolt seat, width and brake clearance: our design office checks them for your car before machining.

Sources for the measurements and answers

  1. koleso.ee, Ferrari Purosangue (2023 .. 2025) (secondary source, consulted on 3 November 2026)
  2. SCC Fahrzeugtechnik (spurverbreiterung.de), Ferrari Purosangue, type F175, 2023 onwards (secondary source, consulted on 3 November 2026)
  3. ThreePiece.us, 2024 Ferrari Purosangue (secondary source, consulted on 3 November 2026)
  4. tirewheelguide.com, 2024 Ferrari Purosangue (Purosangue · 2023–2027) (secondary source, consulted on 3 November 2026)
  5. wheelfitment.eu, Ferrari Purosangue (2023 - ) (secondary source, consulted on 3 November 2026)
  6. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1FA224 (Ferrari Purosangue, type F175, 529 kW, December 2022): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 3 November 2026)
  7. Swiss Federal Roads Office (ASTRA), vehicle type record no. AXA203 (Ferrari Purosangue, type F175, 529 kW, November 2023): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 3 November 2026)
  8. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1FA230 (Ferrari Purosangue, type F175, 529 kW, February 2024): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 3 November 2026)
  9. Swiss Federal Roads Office (ASTRA), vehicle type record no. AXA645 (Ferrari Purosangue, type F175, 529 kW, September 2024): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 3 November 2026)
  10. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1FA244 (Ferrari Purosangue, type F175, 529 kW, December 2024): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 3 November 2026)
  11. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1FA248 (Ferrari Purosangue, type F175, 529 kW, July 2025): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 3 November 2026)
  12. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1FA262 (Ferrari Purosangue, type F175, 529 kW, March 2026): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 3 November 2026)
  13. Swiss Federal Roads Office (ASTRA), vehicle type record no. AXB388 (Ferrari Purosangue, type F175, 529 kW, March 2026): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 3 November 2026)
  14. Fiches-auto.fr, tyre load index table (index → kg) (reference table, for a conversion, consulted on 3 October 2026)
  15. UN Regulation No 30 (revision 3), Annex IV, tyre load capacity index table (index → kg), OJ L 201 of 30/07/2008 (reference table, for a conversion, consulted on 3 November 2026)

Each measurement shown comes from a cited source: a manufacturer's document, an official vehicle type record, an original parts catalogue, or two concurring specialist sources. Measurements checked on 3 November 2026 by the Onyx Forged design office.

Custom forged wheels for the Ferrari Purosangue first generation

  • Forged 6061-T6 aluminium
  • 5-axis CNC machining
  • Designed to JWL/VIA standards
  • Fitment worked out for your Ferrari Purosangue first generation

Purosangue: 5x114.3, a 67.1 mm hub, M14 x 1.5 bolts

The Ferrari Purosangue, whose first Swiss vehicle type record dates from December 2022, is 5x114.3 on a 67.1 mm hub, with M14 x 1.5 wheel bolts: wheelfitment.eu, koleso.ee, ThreePiece.us and SCC give these measurements, and tirewheelguide.com the PCD, the centre bore and the thread, each cited in the table. None of the sources we have read gives its tightening torque: we do not publish it.

22 inches at the front, 23 inches at the rear

The vehicle type record of the Swiss Federal Roads Office (ASTRA), the document that sets the tyre and wheel combinations a car may carry, permits only one fitment for the Purosangue, with two diameters: 9J x 22 with an offset of 43.7 mm at the front, with 255/35 R22 tyres, and 11J x 23 with an offset of 34.7 mm at the rear, with 315/30 R23 tyres. Winter tyres go on the same wheels, in the same sizes. ThreePiece.us rounds these offsets; the record prevails. Ferrari gives these offsets to a tenth of a millimetre. The fitment table reproduces them as they are, to the tenth, without rounding them, as do this text and the questions and answers.

The load the wheel must carry

The record gives a permissible load of 1,180 kg on the front axle and 1,545 kg on the rear axle, i.e. 590 and 772.5 kg per wheel: the rear carries the most. The tyre keeps at least the load index of the original fitment, 99 at the front and 108 at the rear (reading a tyre). The braking system limits the smallest possible wheel diameter: the guide wheels and brakes explains why.

What these measurements say about a forged wheel

The offset positions the wheel in the wheel arch: a wider wheel, or a lower offset, brings it closer to the wing. The Onyx Forged design office starts from the measurements on this page, your brakes and your tyres to calculate the width and offset of your wheels, then submits them to you. The offset calculator compares two fitments: it compares, it does not choose the measurement for you.

Roadworthiness test: what is examined

The French roadworthiness test (contrôle technique) examines the wheel without removing it (cracks, deformation, a wheel that protrudes beyond the bodywork) and verifies that the tyre size is one provided for by the manufacturer or accepted as equivalent. Keeping a tyre size from the original fitment, and at least its load index, avoids having to justify it; the details are on the roadworthiness test and registration page.

What we record before machining

Configure your forged wheels for the Ferrari Purosangue

The Onyx Forged design office works out the measurements of your car from its exact version, stated on the registration document, and shows them to you before machining. Each set is cut from forged 6061-T6 aluminium, machined on a 5-axis CNC centre, as monoblock, two-piece or three-piece wheels; our wheels are designed to JWL/VIA standards. Prices by diameter and the lead time are given on this page, under “What Onyx can make”. Start your configuration or write to contact@onyxforgedwheels.com.

Configure custom wheels for your Ferrari Purosangue first generation: free 3D render, on request.

Useful guides

See all generations of the Ferrari Purosangue, or all Ferrari models.