Custom forged wheels for Porsche Panamera 971 (2016-2023)

Technical specifications

Production period: 2016-2023

Original fitment measurements: Porsche Panamera 971

The measurements of the car as delivered new, to identify yours and compare. Each value refers, by a number, to the sources that give it. They are not a recommendation: Onyx does not advise any specific offset.

Hub

Measurement	Original value
PCD (bolt pattern)	5x130^{[1, 2, 3, 4]}
Centre bore	71.6 mm^{[1, 2, 3, 4]}
Thread	M14 x 1.5^{[2, 3, 4]}
Fixing	Wheel bolts^{[2, 3, 4]}
Bolt or nut seat	Not published
Tightening torque	160 Nm^{[1, 2, 4, 5, 6]}

“Not published”: no source gives it with the certainty we require at this stage (see the rule below).

Original fitments by version

Version and fitment	Front				Rear
Version and fitment	Diameter	Width	Original offset (manufacturer)	Tyre	Diameter	Width	Original offset (manufacturer)	Tyre
Panamera, Panamera 4, Panamera 4 E-Hybrid, Panamera 4S (Executive and Sport Turismo included), 19 inches, summer, Not permitted with ceramic brakes (manufacturer)^[6]	19″^{[5, 6]}	9J^{[5, 6]}	ET 64^{[5, 6]}	265/45 ZR19^{[5, 6]}	19″^{[5, 6]}	10.5J^{[5, 6]}	ET 62^{[5, 6]}	295/40 ZR19^{[5, 6]}
Panamera, Panamera 4, Panamera 4 E-Hybrid, Panamera 4S (Executive and Sport Turismo included), 20 inches, summer	20″^{[5, 6]}	9.5J^{[5, 6]}	ET 71^{[5, 6]}	275/40 ZR20^{[5, 6]}	20″^{[5, 6]}	11.5J^{[5, 6]}	ET 68^{[5, 6]}	315/35 ZR20^{[5, 6]}
Panamera, Panamera 4, Panamera 4 E-Hybrid, Panamera 4S (Executive and Sport Turismo included), 21 inches, summer	21″^{[5, 6]}	9.5J^{[5, 6]}	ET 71^{[5, 6]}	275/35 ZR21^{[5, 6]}	21″^{[5, 6]}	11.5J^{[5, 6]}	ET 69^{[5, 6]}	315/30 ZR21^{[5, 6]}
Panamera Turbo, Panamera GTS (Executive and Sport Turismo included), 20 inches, summer	20″^[5]	9.5J^[5]	ET 71^[5]	275/40 ZR20^[5]	20″^[5]	11.5J^[5]	ET 68^[5]	315/35 ZR20^[5]
Panamera Turbo, Panamera GTS (Executive and Sport Turismo included), 21 inches, summer	21″^[5]	9.5J^[5]	ET 71^[5]	275/35 ZR21^[5]	21″^[5]	11.5J^[5]	ET 69^[5]	315/30 ZR21^[5]
Panamera Turbo S, Panamera Turbo S E-Hybrid (Executive and Sport Turismo included), 21 inches, summer	21″^{[5, 6]}	9.5J^{[5, 6]}	ET 71^{[5, 6]}	275/35 ZR21^{[5, 6]}	21″^{[5, 6]}	11.5J^{[5, 6]}	ET 69^{[5, 6]}	325/30 ZR21^{[5, 6]}

The offsets are the original ones, given by the manufacturer or by the sources cited; they help you identify your car's fitment.

What Onyx can make for the Porsche Panamera 971

Custom forged wheels in forged 6061-T6 aluminium, designed to JWL/VIA standards, in monoblock or two-piece construction; three-piece wheels are made on quotation.

The diameters below start at the smallest original diameter recorded on this car (19″) and go up to 24″.

Diameter	Monoblock, set of four wheels	Two-piece, set of four wheels
19″	€3,200 Great Britain: £3,336 with UK import VAT	€4,300 Great Britain: £4,482 with UK import VAT
20″	€3,300 Great Britain: £3,440.40 with UK import VAT	€4,400 Great Britain: £4,586.40 with UK import VAT
21″	€3,550 Great Britain: £3,700.80 with UK import VAT	€4,750 Great Britain: £4,951.20 with UK import VAT
22″	€3,750 Great Britain: £3,908.40 with UK import VAT	€5,200 Great Britain: £5,420.40 with UK import VAT
23″	€3,950 Great Britain: £4,117.20 with UK import VAT	€5,750 Great Britain: £5,992.80 with UK import VAT
24″	€4,100 Great Britain: £4,273.20 with UK import VAT	€6,300 Great Britain: £6,566.40 with UK import VAT

Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Wheels delivered in 4 to 8 working weeks, shipping included, from full payment for an order on the website, or from the deposit for an order on quotation, and at the earliest from your approval of the measurements, the colour or the 3D render you asked for, under article 5.1 of the Terms and Conditions.

The offset and width of your wheels do not come from a table: the Onyx Forged design office calculates them for your car and your brakes, and submits them to you before machining.

Configure wheels for the Porsche Panamera 971

Frequently asked questions: wheels for the Porsche Panamera 971

What is the wheel tightening torque on a Porsche Panamera (971)?

160 Nm, according to Porsche's bulletins on permitted wheels and tyres.^{[1, 5, 6]}

What are the original fitments of a Porsche Panamera (971)?

19 inches: 9J ET 64 at the front, 10.5J ET 62 at the rear. 20 inches: 9.5J ET 71 and 11.5J ET 68. 21 inches: 9.5J ET 71 and 11.5J ET 69. The front and rear wheels differ at every diameter.^{[5, 6]}

Is the 19-inch fitment possible on every Panamera 971?

No. Porsche's bulletins do not list it for the Panamera Turbo, Turbo S and GTS, which start at 20 inches. Bulletin 24/23 also excludes it with PCCB ceramic brakes.^{[5, 6]}

Same fixing measurements

As original equipment, these cars have the same PCD, centre bore, thread and fixing as the Porsche Panamera 971: PCD 5x130, centre bore 71.6 mm, thread M14 x 1.5, fixing: wheel bolts.

Audi e-tron GT F83 (since 2021)
Porsche 718 Boxster 982 (2016–2025)
Porsche 718 Boxster Spyder (982) (2019–2024)
Porsche 718 Cayman 982 (2016–2025)
Porsche 718 Spyder RS 982 (2023–2024)
Porsche 911 996 (1998–2005)
Porsche Cayenne E2 (92A) (2010–2017)
Porsche Cayenne E3 (9YA) (since 2018)

Same fixing measurements; original diameters and offsets: see each car's page. The seat of the bolts or nuts, the width of the wheels and brake clearance are not compared here: this comparison is not an opinion on compatibility.

Sources for the measurements and answers

hubcentric-rings.com, Porsche Panamera by generation (“971”) (secondary source, consulted on 15 October 2026)
koleso.ee, record Porsche Panamera G2 (971) [2016 .. 2020] (secondary source, consulted on 15 October 2026)
koleso.ee, record Porsche Panamera G2 (971) Facelift [2020 .. 2024] (secondary source, consulted on 15 October 2026)
SCC Fahrzeugtechnik, vehicle record Porsche Panamera S, 4, 4S (971), 2016-2023 (secondary source, consulted on 15 October 2026)
Porsche, manufacturer bulletin Panamera (971) “Approved: Wheels and Tires” 08/24, April 2024 (“as of 2017 up to 2020”) (primary source, consulted on 15 October 2026)
Porsche, manufacturer bulletin Panamera (971) “Approved: Wheels and Tires” 24/23, March 2026 revision (“as of 2021”) (primary source, consulted on 15 October 2026)

Publication rule: a measurement is shown only if a primary source gives it (a manufacturer's document, an official vehicle type record, an original parts catalogue, the maker of the original wheel) without another primary source contradicting it, or if two independent specialist sources agree without a primary source contradicting them. The press and forums do not count. Measurements checked on 15 October 2026 by the Onyx Forged design office.

Designs for this generation

Three models from our catalogue, forged to measure for your Porsche Panamera 971. The price is for a set of four wheels: it depends on the construction and the diameter.

Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Find my wheel · All 24 designs in the catalogue

See these wheels on your car

Custom forged wheels for the Porsche Panamera 971

Forged 6061-T6 aluminium
5-axis CNC machining
Designed to JWL/VIA standards
Fitment worked out for your Porsche Panamera 971

Panamera 971: 5x130, 71.6 mm, wheel bolts at 160 Nm

The second-generation Panamera, type 971, is 5x130, on a 71.6 mm hub: three independent specialist sources give this, each cited in the table. Its wheel bolts are M14 x 1.5 according to two of them, and Porsche's bulletins on permitted wheels and tyres give 160 Nm for tightening them. The bolt seat is given by only one source: it is not published here, and we check it for your car.

From 19 to 21 inches, a rear that is always wider

Porsche's bulletins give a different front wheel and rear wheel at each diameter. In 19 inches: 9J ET 64 at the front, 10.5J ET 62 at the rear. In 20 inches: 9.5J ET 71 at the front, 11.5J ET 68 at the rear. In 21 inches: 9.5J ET 71 at the front, 11.5J ET 69 at the rear. The two axles share neither width nor offset, and a front wheel is never fitted at the rear.

Which diameter for which version

Bulletin 08/24 lists the 19-inch fitment for the Panamera, 4, 4 E-Hybrid and 4S, with their Executive and Sport Turismo variants, and bulletin 24/23 also lists it for the 4S E-Hybrid; neither lists it for the Panamera Turbo, Turbo S and GTS. Bulletin 24/23 excludes the 19-inch fitment with PCCB ceramic brakes. For the Turbo S, we include the 21-inch fitment with 325/30 ZR21 at the rear; bulletin 24/23 also lists 315/30 ZR21 and a 20-inch fitment for it, which we have not included.

What we record before machining

The exact version, stated on the registration document: fitments are read version by version.
The braking system, on which the smallest possible diameter depends.
The load per wheel, which matters on a saloon of this mass, especially in Executive and Sport Turismo form.

Configure your forged wheels for the Panamera 971

The Onyx Forged design office works out the measurements of your car from its exact version, stated on the registration document, and shows them to you before machining. Each set is cut from forged 6061-T6 aluminium, machined on a 5-axis CNC centre, as monoblock, two-piece or three-piece wheels; our wheels are designed to JWL/VIA standards. Prices by diameter and the lead time are given on this page, under “What Onyx can make”. Start your configuration or write to contact@onyxforgedwheels.com.

Configure custom wheels for your Porsche Panamera 971: free 3D render, on request.

Useful guides

See all generations of the Porsche Panamera, or all Porsche models.