Custom forged wheels for Porsche Cayenne E2 (92A) (2010-2017)
Technical specifications
- Production period
- 2010-2017
Original fitment measurements: Porsche Cayenne E2 (92A)
The measurements of the car as delivered new, to identify yours and compare. Each value refers, by a number, to the sources that give it. They are not a recommendation: Onyx does not advise any specific offset.
Hub
| Measurement | Original value |
|---|---|
| PCD (bolt pattern) | 5x130 [1, 2, 3] |
| Centre bore | 71.6 mm [1, 2, 3] |
| Thread | M14 x 1.5 [2, 3] |
| Fixing | Wheel bolts [2, 3] |
| Bolt or nut seat | Not published |
| Tightening torque | 180 Nm [4] |
“Not published”: no source gives it with the certainty we require at this stage (see the rule below).
Original fitments by version
| Version and fitment | Front | Rear | ||||||
|---|---|---|---|---|---|---|---|---|
| Diameter | Width | Original offset (manufacturer) | Tyre | Diameter | Width | Original offset (manufacturer) | Tyre | |
| Cayenne, Cayenne Diesel, Cayenne S, Cayenne S Diesel, Cayenne S E-Hybrid (92A), 18 inches, summer, Not permitted with ceramic brakes (manufacturer) [4] | 18″ [4] | 8J [4] | ET 53 [4] | 255/55 R18 [4] | 18″ [4] | 8J [4] | ET 53 [4] | 255/55 R18 [4] |
| Cayenne, Cayenne Diesel, Cayenne S, Cayenne S Diesel, Cayenne S E-Hybrid (92A), 19 inches, summer | 19″ [4] | 8.5J [4] | ET 59 [4] | 265/50 R19 [4] | 19″ [4] | 8.5J [4] | ET 59 [4] | 265/50 R19 [4] |
| Cayenne, Cayenne Diesel, Cayenne S, Cayenne S Diesel, Cayenne S E-Hybrid (92A), 20 inches, summer | 20″ [4] | 9J [4] | ET 57 [4] | 275/45 R20 [4] | 20″ [4] | 9J [4] | ET 57 [4] | 275/45 R20 [4] |
| Cayenne, Cayenne Diesel, Cayenne S, Cayenne S Diesel, Cayenne S E-Hybrid (92A), 20 inches, 9.5J wheels, summer | 20″ [4] | 9.5J [4] | ET 47 [4] | 275/45 R20 [4] | 20″ [4] | 9.5J [4] | ET 47 [4] | 275/45 R20 [4] |
| Cayenne, Cayenne Diesel, Cayenne S, Cayenne S Diesel, Cayenne S E-Hybrid (92A), 21 inches, summer | 21″ [4] | 10J [4] | ET 50 [4] | 295/35 R21 [4] | 21″ [4] | 10J [4] | ET 50 [4] | 295/35 R21 [4] |
| Cayenne GTS, Cayenne Turbo (92A), 19 inches, summer, Not permitted with ceramic brakes (manufacturer) [4] | 19″ [4] | 8.5J [4] | ET 59 [4] | 265/50 R19 [4] | 19″ [4] | 8.5J [4] | ET 59 [4] | 265/50 R19 [4] |
| Cayenne GTS, Cayenne Turbo (92A), 20 inches, summer | 20″ [4] | 9J [4] | ET 57 [4] | 275/45 R20 [4] | 20″ [4] | 9J [4] | ET 57 [4] | 275/45 R20 [4] |
| Cayenne GTS, Cayenne Turbo (92A), 20 inches, 9.5J wheels, summer | 20″ [4] | 9.5J [4] | ET 47 [4] | 275/45 R20 [4] | 20″ [4] | 9.5J [4] | ET 47 [4] | 275/45 R20 [4] |
| Cayenne GTS, Cayenne Turbo (92A), 21 inches, summer | 21″ [4] | 10J [4] | ET 50 [4] | 295/35 R21 [4] | 21″ [4] | 10J [4] | ET 50 [4] | 295/35 R21 [4] |
| Cayenne Turbo S (92A), 20 inches, summer | 20″ [4] | 9J [4] | ET 57 [4] | 275/45 R20 [4] | 20″ [4] | 9J [4] | ET 57 [4] | 275/45 R20 [4] |
| Cayenne Turbo S (92A), 20 inches, 9.5J wheels, summer | 20″ [4] | 9.5J [4] | ET 47 [4] | 275/45 R20 [4] | 20″ [4] | 9.5J [4] | ET 47 [4] | 275/45 R20 [4] |
| Cayenne Turbo S (92A), 21 inches, summer | 21″ [4] | 10J [4] | ET 50 [4] | 295/35 R21 [4] | 21″ [4] | 10J [4] | ET 50 [4] | 295/35 R21 [4] |
The offsets are the original ones, given by the manufacturer or by the sources cited; they help you identify your car's fitment.
What Onyx can make for the Porsche Cayenne E2 (92A)
Custom forged wheels in forged 6061-T6 aluminium, designed to JWL/VIA standards, in monoblock or two-piece construction; three-piece wheels are made on quotation.
The diameters below start at the smallest original diameter recorded on this car (18″) and go up to 24″.
| Diameter | Monoblock, set of four wheels | Two-piece, set of four wheels |
|---|---|---|
| 18″ | €3,200 Great Britain: £3,336 with UK import VAT | €4,300 Great Britain: £4,482 with UK import VAT |
| 19″ | €3,200 Great Britain: £3,336 with UK import VAT | €4,300 Great Britain: £4,482 with UK import VAT |
| 20″ | €3,300 Great Britain: £3,440.40 with UK import VAT | €4,400 Great Britain: £4,586.40 with UK import VAT |
| 21″ | €3,550 Great Britain: £3,700.80 with UK import VAT | €4,750 Great Britain: £4,951.20 with UK import VAT |
| 22″ | €3,750 Great Britain: £3,908.40 with UK import VAT | €5,200 Great Britain: £5,420.40 with UK import VAT |
| 23″ | €3,950 Great Britain: £4,117.20 with UK import VAT | €5,750 Great Britain: £5,992.80 with UK import VAT |
| 24″ | €4,100 Great Britain: £4,273.20 with UK import VAT | €6,300 Great Britain: £6,566.40 with UK import VAT |
Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.
Wheels delivered in 4 to 8 working weeks, shipping included, from full payment for an order on the website, or from the deposit for an order on quotation, and at the earliest from your approval of the measurements, the colour or the 3D render you asked for, under article 5.1 of the Terms and Conditions.
The offset and width of your wheels do not come from a table: the Onyx Forged design office calculates them for your car and your brakes, and submits them to you before machining.
Frequently asked questions: wheels for the Porsche Cayenne E2 (92A)
What is the wheel tightening torque on a Porsche Cayenne E2 (92A)?
180 Nm, according to Porsche's bulletin on permitted wheels and tyres. Two specialist databases publish 160 Nm, the value for the Cayenne E3: we follow Porsche. [2, 3, 4]
What are the original fitments of a Porsche Cayenne E2 (92A)?
Both axles have the same fitment. 18 inches: 8J ET 53 with 255/55 R18. 19 inches: 8.5J ET 59 with 265/50 R19. 20 inches: 9J ET 57 with 275/45 R20, or 9.5J ET 47. 21 inches: 10J ET 50 with 295/35 R21. The GTS and Turbo have no 18-inch fitment. [4]
Which Cayenne E2 fitments require wheel arch extensions?
Porsche's bulletin permits the 20-inch 9.5J ET 47 fitment and the 21-inch 10J ET 50 fitment only with the wheel arch extensions or the SportDesign package. [4]
Same fixing measurements
As original equipment, these cars have the same PCD, centre bore, thread and fixing as the Porsche Cayenne E2 (92A): PCD 5x130, centre bore 71.6 mm, thread M14 x 1.5, fixing: wheel bolts.
- Audi e-tron GT F83 (since 2021)
- Porsche 718 Boxster 982 (2016–2025)
- Porsche 718 Boxster Spyder (982) (2019–2024)
- Porsche 718 Cayman 982 (2016–2025)
- Porsche 718 Spyder RS 982 (2023–2024)
- Porsche 911 996 (1998–2005)
- Porsche Panamera 971 (2016–2023)
Same fixing measurements; original diameters and offsets: see each car's page. The seat of the bolts or nuts, the width of the wheels and brake clearance are not compared here: this comparison is not an opinion on compatibility.
Sources for the measurements and answers
- hubcentric-rings.com, Porsche Cayenne by generation (“9YA”) (secondary source, consulted on 15 October 2026)
- koleso.ee, record Porsche Cayenne E2 (92A) Facelift [2014 .. 2018] (secondary source, consulted on 15 October 2026)
- SCC Fahrzeugtechnik, vehicle record Porsche Cayenne (958), 92A, 2010-2017 (secondary source, consulted on 15 October 2026)
- Porsche, manufacturer bulletin Cayenne (92A) “Approved: Wheels, Tires and Spacers” 49/22, August 2022 (“as of 2015 up to 2018”) (primary source, consulted on 15 October 2026)
Publication rule: a measurement is shown only if a primary source gives it (a manufacturer's document, an official vehicle type record, an original parts catalogue, the maker of the original wheel) without another primary source contradicting it, or if two independent specialist sources agree without a primary source contradicting them. The press and forums do not count. Measurements checked on 15 October 2026 by the Onyx Forged design office.
Designs for this generation
Three models from our catalogue, forged to measure for your Porsche Cayenne E2 (92A). The price is for a set of four wheels: it depends on the construction and the diameter.
OX-C9 RazorMonoblock · From €3,200 for a set of four wheelsGreat Britain: from £3,336 with UK import VAT
OX-GT15 TurbineMonoblock · From €3,200 for a set of four wheelsGreat Britain: from £3,336 with UK import VAT
OX-D5 ZenithTwo-piece · From €4,300 for a set of four wheelsGreat Britain: from £4,482 with UK import VAT
Amounts in pounds: our checkout on 4 October 2026, before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.
Custom forged wheels for the Porsche Cayenne E2 (92A)
- Forged 6061-T6 aluminium
- 5-axis CNC machining
- Designed to JWL/VIA standards
- Fitment worked out for your Porsche Cayenne E2 (92A)
Cayenne E2: the same PCD (bolt pattern) as the E3, but not the same torque
The second-generation Cayenne, type 92A, often called the E2, is 5x130, on a 71.6 mm hub: three independent specialist sources give this, each cited in the table, with M14 x 1.5 wheel bolts. Porsche's bulletin on permitted wheels and tyres calls for 180 Nm to tighten them. Two specialist databases publish 160 Nm, the value for the Cayenne E3: for the E2, we follow Porsche. The bolt seat is given by only one source: it is not published here.
The same fitment on both axles
Unlike the E3, Porsche's bulletins do not distinguish between the front and the rear of the E2: the fitment is the same on both axles. It is 8J ET 53 in 18 inches, 8.5J ET 59 in 19 inches, 9J ET 57 in 20 inches and 10J ET 50 in 21 inches. The Cayenne GTS and Turbo have no 18-inch fitment, and the Turbo S starts at 20 inches. The 18-inch fitment of the base versions and the 19-inch fitment of the GTS and Turbo are excluded with PCCB ceramic brakes.
The 20-inch 9.5J and the 21-inch fitments need prepared wheel arches
The 20-inch fitment comes in two sizes: 9J ET 57, or 9.5J ET 47. The latter, like the 21-inch 10J ET 50, is permitted only with wheel arch extensions or with the SportDesign package. The bulletin covers only North American model years 2015 to 2018: the fitments of older Cayennes are not published here, and we establish them for your car before any machining.
Configure your forged wheels for the Cayenne E2
The Onyx Forged design office works out the measurements of your car from its exact version, stated on the registration document, and shows them to you before machining. Each set is cut from forged 6061-T6 aluminium, machined on a 5-axis CNC centre, as monoblock, two-piece or three-piece wheels; our wheels are designed to JWL/VIA standards. Prices by diameter and the lead time are given on this page, under “What Onyx can make”. Start your configuration or write to contact@onyxforgedwheels.com.
Configure custom wheels for your Porsche Cayenne E2 (92A): free 3D render, on request.
Useful guides
Other Porsche Cayenne generations
Onyx Forged designs and has wheels made for these generations too. Each one has its own PCD, offsets and sizes: make sure you are on yours.
- Porsche Cayenne E3 (9YA) forged wheels (since 2018)
See all generations of the Porsche Cayenne, or all Porsche models.