Onyx Forged
FREN

Forged wheels for McLaren 570S 2015-2021

Onyx Kyoto forged wheel

2015 – 2021

All our wheels in 19, 20 and 21″, made to your car's measurements. From €3,200 for a set of 4 in 19″. Free delivery to 35 European countries.

Great Britain: from £3,271.20 with UK import VAT, delivery included

Sizes offered: 19″ · 20″ · 21″. Prices below in 20″.

Our 45 wheels and their prices

Amounts in pounds: our checkout on 13 November 2026, for the wheels, delivery included (free), before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Exact measurements, offset, staggered fitment, concavity, another finish or diameter? Our workshop sets it all up with you. Contact the workshop

Technical specifications

Production period
2015-2021

Original fitment measurements: McLaren 570S coupé and Spider

The measurements of the car as delivered new, to identify yours and compare. Each value refers, by a number, to the sources that give it. Our design office works out your offset and submits it to you before machining.

Hub

MeasurementOriginal value
PCD (bolt pattern)5x112 [1, 2, 3]
Centre bore57.1 mm [1, 2, 3]
ThreadM14 x 1.5 [1, 2, 3]
FixingWheel bolts [1, 3]
Bolt or nut seatNot published
Tightening torqueNot published

“Not published”: no source sure enough to show it yet.

Original fitments by version

Version and fitmentFrontRear
DiameterWidthOriginal offset (manufacturer)TyreDiameterWidthOriginal offset (manufacturer)Tyre
570S coupé and Spider (419 kW), records of 2017 to 2019, 19 and 20 inches, staggered fitment, original equipment19″ [4, 5, 6, 7]8J [4, 5, 6, 7]ET 41 [4, 5, 6, 7]225/35 R19 [4, 5, 6, 7]20″ [4, 5, 6, 7]10J [4, 5, 6, 7]ET 24 [4, 5, 6, 7]285/35 R20 [4, 5, 6, 7]

The offsets are the original ones, given by the manufacturer or by the sources cited; they help you identify your car's fitment.

What Onyx can make for the McLaren 570S coupé and Spider

Custom forged wheels in forged 6061-T6 aluminium, designed to JWL/VIA standards, in monoblock or two-piece construction; three-piece wheels are made on quotation.

The diameters below start at the smallest original diameter recorded on this car (19″) and go up to 24″.

DiameterMonoblock, set of four wheelsTwo-piece, set of four wheels
19″€3,200
Great Britain: £3,271.20 with UK import VAT		€4,300
Great Britain: £4,395.60 with UK import VAT
20″€3,300
Great Britain: £3,373.20 with UK import VAT		€4,400
Great Britain: £4,497.60 with UK import VAT
21″€3,550
Great Britain: £3,628.80 with UK import VAT		€4,750
Great Britain: £4,855.20 with UK import VAT
22″€3,750
Great Britain: £3,832.80 with UK import VAT		€5,200
Great Britain: £5,314.80 with UK import VAT
23″€3,950
Great Britain: £4,038 with UK import VAT		€5,750
Great Britain: £5,877.60 with UK import VAT
24″€4,100
Great Britain: £4,190.40 with UK import VAT		€6,300
Great Britain: £6,439.20 with UK import VAT

Amounts in pounds: our checkout on 13 November 2026, for the wheels, delivery included (free), before the carrier's clearance fee and any import duty. The amount shown at checkout is the one charged for your order.

Wheels delivered in 4 to 8 working weeks, transit time included, from full payment, whether you order on the website or on quotation (or from the agreed deposit, if you asked for one), and at the earliest from your approval of the measurements, the colour or the 3D render you asked for, under article 5.1 of the Terms and Conditions.

Free delivery to 35 European countries (Terms and Conditions, article 5.2).

The offset and width of your wheels do not come from a table: the Onyx Forged design office calculates them for your car and your brakes, and submits them to you before machining.

Configure wheels for the McLaren 570S coupé and Spider

Frequently asked questions: wheels for the McLaren 570S coupé and Spider

What are the original offsets for the wheels of a McLaren 570S?

A staggered fitment, according to its Swiss vehicle type records of 2017 to 2019: 8J x 19 with an offset of 41 at the front, 10J x 20 with an offset of 24 at the rear, on the coupé as on the Spider. [4, 6]

Which tyres, and which load index, does a McLaren 570S take?

At the front, 225/35 R19 with a load index of 88, i.e. 560 kg per tyre; at the rear, 285/35 R20 with an index of 104, i.e. 900 kg. [4, 6, 8, 9]

What is the load per wheel on a McLaren 570S?

Its Swiss vehicle type records give a permissible load of 834 kg on the front axle and 1,150 kg on the rear axle, i.e. 417 and 575 kg per wheel: the engine sits behind the seats, so the rear carries the most. The 285/35 R20 rear tyre with a load index of 104 carries 900 kg. [4, 6, 8, 9]

What PCD, centre bore and bolts does a McLaren 570S use?

The PCD is 5x112, the centre bore 57.1 mm, and the wheels are held by M14 x 1.5 wheel bolts, according to koleso.ee, SCC and ThreePiece.us. The tightening torque is not published: only one of the sources read gives it. [1, 2, 3]

Same fixing measurements

As original equipment, these cars have the same PCD, centre bore, thread and fixing as the McLaren 570S coupé and Spider: PCD 5x112, centre bore 57.1 mm, thread M14 x 1.5, fixing: wheel bolts.

Same fixing measurements; original diameters and offsets: see each car's page. Bolt seat, width and brake clearance: our design office checks them for your car before machining.

Sources for the measurements and answers

  1. koleso.ee, McLaren 570S [2015 .. 2021] (secondary source, consulted on 7 November 2026)
  2. SCC Fahrzeugtechnik (spurverbreiterung.de), McLaren 570S 3.8, 2015- (secondary source, consulted on 7 November 2026)
  3. ThreePiece.us, 2018 McLaren 570S Base (secondary source, consulted on 7 November 2026)
  4. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1MP624 (McLaren 570S (type MA3), 419 kW, Spider, June 2017): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 7 November 2026)
  5. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1MP630 (McLaren 570S (type MA3), 419 kW, Spider, June 2018): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 7 November 2026)
  6. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1MP636 (McLaren 570S (type MA3), 419 kW, Coupé, May 2019): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 7 November 2026)
  7. Swiss Federal Roads Office (ASTRA), vehicle type record no. 1MP639 (McLaren 570S (type MA3), 419 kW, Spider, May 2019): permitted tyre and wheel combinations (tyre, width x diameter, offset) and axle loads (primary source, consulted on 7 November 2026)
  8. Fiches-auto.fr, tyre load index table (index → kg) (reference table, for a conversion, consulted on 3 October 2026)
  9. UN Regulation No 30 (revision 3), Annex IV, tyre load capacity index table (index → kg), OJ L 201 of 30/07/2008 (reference table, for a conversion, consulted on 7 November 2026)

Each measurement shown comes from a cited source: a manufacturer's document, an official vehicle type record, an original parts catalogue, or two concurring specialist sources. Measurements checked on 7 November 2026 by the Onyx Forged design office.

Custom forged wheels for the McLaren 570S coupé and Spider

  • Forged 6061-T6 aluminium
  • 5-axis CNC machining
  • Designed to JWL/VIA standards
  • Fitment worked out for your McLaren 570S coupé and Spider

McLaren 570S: 5x112, a 57.1 mm hub, M14 x 1.5 bolts

The 419 kW McLaren 570S, as a coupé and as a Spider, is 5x112 on a 57.1 mm hub, with M14 x 1.5 wheel bolts: koleso.ee, SCC and ThreePiece.us give these measurements, each cited in the table. Only one of the sources read gives the tightening torque: we do not publish it. The 720S has its own page.

A 19 and 20-inch staggered fitment

The vehicle type record of the Swiss Federal Roads Office (ASTRA), the document that sets the tyre and wheel combinations a car may carry, permits a staggered fitment for the 570S: 8J x 19 at an offset of 41 at the front, with 225/35 R19 tyres, and 10J x 20 at an offset of 24 at the rear, with 285/35 R20 tyres, as a coupé and as a Spider, in the records from June 2017 to May 2019. The older records of the coupé write their offsets to the tenth, or give two for the same wheel: they are not cited here, and no value is rounded.

The load the wheel must carry

The engine sits behind the seats: the rear carries the most. The records give a permissible load of 834 kg on the front axle and 1,150 kg on the rear axle, i.e. 417 and 575 kg per wheel. The tyre keeps at least the load index of the original fitment, 88 at the front and 104 at the rear (reading a tyre). The braking system limits the smallest possible wheel diameter: the guide wheels and brakes explains why.

What these measurements say about a forged wheel

The offset positions the wheel in the wheel arch: a wider wheel, or a lower offset, brings it closer to the wing. The Onyx Forged design office starts from the measurements on this page, your brakes and your tyres to calculate the width and offset of your wheels, then submits them to you. The offset calculator compares two fitments: it compares, it does not choose the measurement for you.

Roadworthiness test: what is examined

The French roadworthiness test (contrôle technique) examines the wheel without removing it (cracks, deformation, a wheel that protrudes beyond the bodywork) and verifies that the tyre size is one provided for by the manufacturer or accepted as equivalent. Keeping a tyre size from the original fitment, and at least its load index, avoids having to justify it; the details are on the roadworthiness test and registration page.

What we record before machining

Configure your forged wheels for the McLaren 570S (coupé and Spider)

The Onyx Forged design office works out the measurements of your car from its exact version, stated on the registration document, and shows them to you before machining. Each set is cut from forged 6061-T6 aluminium, machined on a 5-axis CNC centre, as monoblock, two-piece or three-piece wheels; our wheels are designed to JWL/VIA standards. Prices by diameter and the lead time are given on this page, under “What Onyx can make”. Start your configuration or write to contact@onyxforgedwheels.com.

Configure custom wheels for your McLaren 570S coupé and Spider: free 3D render, on request.

Useful guides

See all generations of the McLaren 570S, or all McLaren models.